Prototypes

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(#62 GTA02 A5)
(#60 GTA02 A5)
Line 40: Line 40:
 
=== #60 GTA02 A5 ===
 
=== #60 GTA02 A5 ===
 
current holder: Matt<br>
 
current holder: Matt<br>
 +
10 March GPS antenna is borken <br>
 
29 Feb 2008 Matt for GSM test usage<br>
 
29 Feb 2008 Matt for GSM test usage<br>
 
29 Feb 2008 Allen GSM IR resistor rework<br>
 
29 Feb 2008 Allen GSM IR resistor rework<br>

Revision as of 09:25, 10 March 2008

Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.

This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.

Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.

If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.

Contents

#65 GTA02 A5

current holder: Michael Shiloh
06 Mar 2008 Ship to Michael Shiloh with coulomb battery
05 Mar 2008 Finish CMU-200 test
04 Mar 2008 850 Band re-work and add IR resistor for power saving
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#64 GTA02 A5

current holder: Tony
05 Mar 2008 Finish CMU-200 test
04 Mar 2008 850 Band re-work and add IR resistor for power saving
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#63 GTA02 A5

current holder: Tony
05 Mar 2008 Finish CMU-200 test, but once unstable boot into kernel
04 Mar 2008 850 Band re-work and add IR resistor for power saving
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#62 GTA02 A5

current holder: Raster
07 Mar 2008 Transfer to Raster for another developer about graphics work
03 Mar 2008 Tony use for DM/u-boot verification
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#61 GTA02 A5

current holder: Matt
29 Feb 2008 Matt for GSM test usage
29 Feb 2008 Allen GSM IR resistor rework
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#60 GTA02 A5

current holder: Matt
10 March GPS antenna is borken
29 Feb 2008 Matt for GSM test usage
29 Feb 2008 Allen GSM IR resistor rework
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#59 GTA02 A5

current holder: Matt
29 Feb 2008 Matt for GSM test usage
29 Feb 2008 Allen GSM IR resistor rework
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#58 GTA02 A5

current holder: Harry
03 Mar 2008 Harry bring to Cebit Show
28 Feb 2008 Tony for DM test usage
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#57 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Allen Chang
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#56 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Tony
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#55 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Andy
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#54 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Miles
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#53 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Matt
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#52 GTA02 A5

current holder: Wolfgang
22 Feb 2008 run DM2 (without wifi), Bluetooth no radio 18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#51 GTA02 A5

current holder: Tony
05 Mar 2008 Finish u-boot test, and return to tony 29 Feb 2008 hardware side fixed 911 key and receiver issue.
22 Feb 2008 run DM2 (without wifi), Bluetooth no radio, 911 key no switch, receiver broken
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#50 GTA02 A5

current holder: Sean
22 Feb 2008 run DM2 (without wifi), Bluetooth working (!)
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#49 GTA02 A5

current holder: OLV
22 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#48 GTA02 A5

current holder: Hoger
05 Mar 2008 Transfer to Hoger
22 Feb 2008 run DM2 (without wifi), Bluetooth radio very weak
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#47 GTA02 A5

current holder: Michael Dietrich
27 Feb 2008 Transfered to Will, sent to Michael
22 Feb 2008 run DM2 (without wifi), Bluetooth radio very weak
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#46 GTA02 A5

current holder: Thomas
06 Mar 2008 Mail to o-hand Thomas as GTA02v4 replacement, with coulomb battery
27 Feb 2008 Add PMU capacitor
22 Feb 2008 run DM2 (without wifi), Bluetooth no radio, 911 key no switch
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#45 GTA02 A5

current holder: Jeremy
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#44 unlucky number

#43 GTA02 A5

current holder: Miles
21 Feb 2008 to Miles for DM2 partition verification
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#42 GTA02 A5

current holder: Julian
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio, weak vibrator
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#41 GTA02 A5

current holder: Lorn Potter (Trolltech)
22 Feb 2008 sent to Lorn Potter, Trolltech
22 Feb 2008 Tony: ran DM2 (without wifi), Bluetooth no radio
22 Feb 2008 Tony: replaced receiver
21 Feb 2008 Earphone broken in the package
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio, receiver broken
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#40 GTA02 A5

current holder: Tick
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#39 GTA02 A5

current holder: Sean Chiang
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#38 GTA02 A5

current holder: Andy
21 Feb 2008: run DM2 (without wifi), no issues, Bluetooth working (!)
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#37 GTA02 A5

current holder: Lorn Potter (Trolltech)
22 Feb 2008 sent to Lorn Potter, Trolltech
21 Feb 2008 run DM2 (without wifi), no issues, Bluetooth working (!)
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#36 GTA02 A5

current holder: Graeme (FOSDEM)
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio, LCM cracked
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#35 GTA02 A5

current holder: Dodji (FOSDEM)
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#34 GTA02 A5

current holder: Martin
05 Mar 2008 Return to hardware side for GPS antenna switch second source test
20 Feb 2008 run DM2 (without wifi), receiver broken, 911 key broken, Bluetooth scan not working, Tony thinks device may have been drop-tested!
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#33 GTA02 A5

current holder: Erin
22 Feb 2008 Erin: load daily build rootfs '0220-fic-gta02.rootfs.jffs2' and kernel 'uImage-2.6.24+svnr4096-r4055-r3-neo1973.bin'. gsmd is running OK, can receive/dial out calls. but no ringtone for incoming calls.
20 Feb 2008 run DM2 (without wifi), Bluetooth scan not working, vibrator very weak
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#32 GTA02 A5

current holder: Miles
20 Feb 2008 run DM2 (without wifi), Bluetooth scan not working
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#31 GTA02 A5

current holder: Andy
20 Feb 2008 run DM2 (without wifi), Bluetoosh Scan only found 1 out of 3 devices
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#30 GTA02 A5

current holder: Mickey
24 Feb 2008 issue found: Headphone Jack GPIO is floating, receiving 500 IRQ's per second, making the system crawl like it has only 50MHz (or less...)
24 Feb 2008 issue found: Once sound is initialized, it emits two loud cracks per second
24 Feb 2008 issue found: Vibrator is very weak
23 Feb 2008 flash NOR-enabled U-Boot, flash kernel+rootfs
20 Feb 2008 run DM2 (without wifi), no issues found
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#29 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Andy

#28 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Tony Tu

#27 GTA02 A5

current holder: Willie
18 Feb 2008 Tony: Add Wi-Fi Module FW2.0.0.89
18 Feb 2008 Willie: LCD seems be broken. Screen shows three lines.
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#26 GTA02 A5

current holder: Allen Lin
18 Feb 2008 Tony: Add Wi-Fi Module FW2.0.0.89
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#25 GTA02 A5

current holder: Raster
18 Feb 2008 Tony: Add Wi-Fi Module FW2.0.0.89
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#24 GTA02 A5

current holder: John
18 Feb 2008 Tony: Add Wi-Fi Module FW2.0.0.89
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#23 GTA02 A5

current holder: JJ, battery vendor
12 Feb 2008 Willie: Install kernel image from lastest svn check out
12 Feb 2008 Tony: removed wifi module
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#22 GTA02 A5

current holder: Tim Lee
15 Feb 2008 Tony: Back to hardware team
13 Feb 2008 Erin: gsm modem is bad
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#21 GTA02 A5

current holder: Matt
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad, GPS broken
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)

#20 GTA02 A5

current holder: Martin
05 Mar 2008 GPS antenna switch 2nd source test
21 Feb 2008 Miles: factory partition broken
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
13 Feb 2008 Miles take from Tony for PBE comparsion test
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)

#19 GTA02 A5

current holder: Brenda
27 Feb Add PMU capacitor
21 Feb 2008 Tony: Add WiFi FW 2.0.0.89
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)

#18 GTA02 A5

current holder: Tim Lee
15 Feb 2008 Willie: Send to hardware side and fix it. 12 Feb 2008 Willie: It will generate big noise, maybe it's a hardware issue. I will check this
12 Feb 2008 Erin: after booting to UI, the screen freezes, no any response. Willie is checking it now
09 Feb 2008 Erin: load uboot, kernel, rootfs by Sean Chiang, it can auto-camp to the network, can use dialer
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)

#17 GTA02 A5

current holder: Vitaly (Atheros)
01 Feb 2008 Delivered to Vitaly, Atheros
29 Jan 2008 Same as #1 until 29 Jan 2008

#16 GTA02 A5

current holder: Samuel
31 Jan 2008 Sent to Samuel
29 Jan 2008 Same as #1 until 29 Jan 2008

#15 GTA02 A5

current holder: Tony
31 Jan 2008 Running from battery shuts down 5 seconds after reboot. Running from power source (plugged into battery connectors) is stable
29 Jan 2008 Same as #1 until 29 Jan 2008

#14 GTA02 A5

current holder: Willie
27 Feb 2008 Willie: Get second phone
21 Feb 2008 Tony: switched wifi to FW 2.0.0.89
29 Jan 2008 Same as #1 until 29 Jan 2008

#13 GTA02 A5

current holder: Tony
29 Jan 2008 Miles: Bluetooth scan doesn't work, Power Key broken
29 Jan 2008 Same as #1 until 29 Jan 2008

#12 GTA02 A5

current holder: Tim Lee
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules

#11 GTA02 A5

current holder: Tim Lee
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules

#10 GTA02 A5

current holder: Tim Lee
29 Jan 2008 Same as #1 until 29 Jan 2008 Die. Because I connect the power supply and usb. Then I shutdown the power supply, and power on the power supply. Quickly, the phone is short.

#9 GTA02 A5

current holder: Matt
5 Feb 2008 There are some hardware components broken. The behavior of i2c accessing is strange. And its suspend current is quite high (14~15mA).
29 Jan 2008 Matt: Found out jack insert interrupt line is floating
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules

#8 GTA02 A5

current holder: Tim Lee
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules

#7 GTA02 A5

current holder: Tony
27 Feb Add PMU capacitor
21 Feb 2008 Tony: added receiver, switched to wifi FW 2.0.0.89
05 Feb 2008 Miles: removed receiver
29 Jan 2008 Miles: receiver test failed (receiver broken)
29 Jan 2008 Same as #1 until 29 Jan 2008

#6 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Tony
29 Jan 2008 Willie: verified

#5 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Willie: verified

#4 Highcell battery 3.7V 1200mAh with Coulomb counter (Tony)

current holder: Tony
04 Mar 2008 Returned to Tony who gave me two "end user" batteries instead.
08 Feb 2008 Got it. Passes power-on test.
30 Jan 2008 sent to Werner
29 Jan 2008 Willie: verified

#3 GTA02 A5

current holder: Tony
05 Feb 2008 Found solution: added capacitor
02 Feb 2008 I see similar behaviour to #15 today on battery + USB. Appears to be related to, eg, starting LCM backlight making power problems resulting in immediate shutdown. Current limit issue somehow?
01 Feb 2008 Behaving well.
29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1 until 29 Jan 2008

#2 GTA02 A5

current holder: Harald
29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1 until 29 Jan 2008

#1 GTA02 A5 (Werner)

current holder: Werner
05 Mar 2008 Vibrator seems to be broken or unnoticeably weak
04 Mar 2008 SD/MMC seems broken under Linux (same usage works fine on #51; u-boot can read from it)
11 Feb 2008 Verified NOR WP (with reworked debug v3)
09 Feb 2008 Rework: bypass VB_SYS with 10uF 0603 6V3 cer X5R
08 Feb 2008 Got it. Passes power-on test.
30 Jan 2008 sent to Werner
30 Jan 2008 Miles: verified hardware, same exceptions as below
30 Jan 2008 Allen Chang: reworked to add NOR protection (R2505 closed, R2506 opened)
29 Jan 2008 Miles: verified hardware, except for

  • microSD
  • suspend/resume
  • Bluetooth audio
  • Coulomb counter & motion sensor only low-level verification (no drivers)
  • USB host only low-level verification (no device)
  • charging (only 500mA verified), running on USB only, switching between charging modes
  • full memory verification
  • wakeup interrupts (WiFi, USB, GSM, motion sensors, 2 buttons, RTC, headphone jack)

28 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
28 Jan 2008 Tony: Rework wifi FW to 2.0.0.40
28 Jan 2008 Batch of 10 from Suzhou, PCBA with all modules, wifi FW 1.3, NOR protection disabled, full DM1 (v009) and DM2 (v012)

Personal tools

Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.

This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.

Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.

If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.

#65 GTA02 A5

current holder: Michael Shiloh
06 Mar 2008 Ship to Michael Shiloh with coulomb battery
05 Mar 2008 Finish CMU-200 test
04 Mar 2008 850 Band re-work and add IR resistor for power saving
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#64 GTA02 A5

current holder: Tony
05 Mar 2008 Finish CMU-200 test
04 Mar 2008 850 Band re-work and add IR resistor for power saving
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#63 GTA02 A5

current holder: Tony
05 Mar 2008 Finish CMU-200 test, but once unstable boot into kernel
04 Mar 2008 850 Band re-work and add IR resistor for power saving
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#62 GTA02 A5

current holder: Raster
07 Mar 2008 Transfer to Raster for another developer about graphics work
03 Mar 2008 Tony use for DM/u-boot verification
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#61 GTA02 A5

current holder: Matt
29 Feb 2008 Matt for GSM test usage
29 Feb 2008 Allen GSM IR resistor rework
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#60 GTA02 A5

current holder: Matt
29 Feb 2008 Matt for GSM test usage
29 Feb 2008 Allen GSM IR resistor rework
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#59 GTA02 A5

current holder: Matt
29 Feb 2008 Matt for GSM test usage
29 Feb 2008 Allen GSM IR resistor rework
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#58 GTA02 A5

current holder: Harry
03 Mar 2008 Harry bring to Cebit Show
28 Feb 2008 Tony for DM test usage
28 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#57 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Allen Chang
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#56 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Tony
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#55 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Andy
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#54 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Miles
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#53 Highcell battery 3.6V 1200mAh with Coulomb counter

current holder: Matt
28 Feb 2008 With correct terminal voltage 3.6 vot 0% setting on bq27000

#52 GTA02 A5

current holder: Wolfgang
22 Feb 2008 run DM2 (without wifi), Bluetooth no radio 18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#51 GTA02 A5

current holder: Tony
05 Mar 2008 Finish u-boot test, and return to tony 29 Feb 2008 hardware side fixed 911 key and receiver issue.
22 Feb 2008 run DM2 (without wifi), Bluetooth no radio, 911 key no switch, receiver broken
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#50 GTA02 A5

current holder: Sean
22 Feb 2008 run DM2 (without wifi), Bluetooth working (!)
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#49 GTA02 A5

current holder: OLV
22 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#48 GTA02 A5

current holder: Hoger
05 Mar 2008 Transfer to Hoger
22 Feb 2008 run DM2 (without wifi), Bluetooth radio very weak
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#47 GTA02 A5

current holder: Michael Dietrich
27 Feb 2008 Transfered to Will, sent to Michael
22 Feb 2008 run DM2 (without wifi), Bluetooth radio very weak
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#46 GTA02 A5

current holder: Thomas
06 Mar 2008 Mail to o-hand Thomas as GTA02v4 replacement, with coulomb battery
27 Feb 2008 Add PMU capacitor
22 Feb 2008 run DM2 (without wifi), Bluetooth no radio, 911 key no switch
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#45 GTA02 A5

current holder: Jeremy
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#44 unlucky number

#43 GTA02 A5

current holder: Miles
21 Feb 2008 to Miles for DM2 partition verification
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#42 GTA02 A5

current holder: Julian
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio, weak vibrator
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#41 GTA02 A5

current holder: Lorn Potter (Trolltech)
22 Feb 2008 sent to Lorn Potter, Trolltech
22 Feb 2008 Tony: ran DM2 (without wifi), Bluetooth no radio
22 Feb 2008 Tony: replaced receiver
21 Feb 2008 Earphone broken in the package
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio, receiver broken
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#40 GTA02 A5

current holder: Tick
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#39 GTA02 A5

current holder: Sean Chiang
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#38 GTA02 A5

current holder: Andy
21 Feb 2008: run DM2 (without wifi), no issues, Bluetooth working (!)
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#37 GTA02 A5

current holder: Lorn Potter (Trolltech)
22 Feb 2008 sent to Lorn Potter, Trolltech
21 Feb 2008 run DM2 (without wifi), no issues, Bluetooth working (!)
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#36 GTA02 A5

current holder: Graeme (FOSDEM)
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio, LCM cracked
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#35 GTA02 A5

current holder: Dodji (FOSDEM)
21 Feb 2008 run DM2 (without wifi), Bluetooth no radio
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#34 GTA02 A5

current holder: Martin
05 Mar 2008 Return to hardware side for GPS antenna switch second source test
20 Feb 2008 run DM2 (without wifi), receiver broken, 911 key broken, Bluetooth scan not working, Tony thinks device may have been drop-tested!
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#33 GTA02 A5

current holder: Erin
22 Feb 2008 Erin: load daily build rootfs '0220-fic-gta02.rootfs.jffs2' and kernel 'uImage-2.6.24+svnr4096-r4055-r3-neo1973.bin'. gsmd is running OK, can receive/dial out calls. but no ringtone for incoming calls.
20 Feb 2008 run DM2 (without wifi), Bluetooth scan not working, vibrator very weak
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#32 GTA02 A5

current holder: Miles
20 Feb 2008 run DM2 (without wifi), Bluetooth scan not working
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#31 GTA02 A5

current holder: Andy
20 Feb 2008 run DM2 (without wifi), Bluetoosh Scan only found 1 out of 3 devices
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#30 GTA02 A5

current holder: Mickey
24 Feb 2008 issue found: Headphone Jack GPIO is floating, receiving 500 IRQ's per second, making the system crawl like it has only 50MHz (or less...)
24 Feb 2008 issue found: Once sound is initialized, it emits two loud cracks per second
24 Feb 2008 issue found: Vibrator is very weak
23 Feb 2008 flash NOR-enabled U-Boot, flash kernel+rootfs
20 Feb 2008 run DM2 (without wifi), no issues found
18 Feb 2008 Hardware add capacitor and FW2.0.0.89 module

#29 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Andy

#28 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Tony Tu

#27 GTA02 A5

current holder: Willie
18 Feb 2008 Tony: Add Wi-Fi Module FW2.0.0.89
18 Feb 2008 Willie: LCD seems be broken. Screen shows three lines.
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#26 GTA02 A5

current holder: Allen Lin
18 Feb 2008 Tony: Add Wi-Fi Module FW2.0.0.89
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#25 GTA02 A5

current holder: Raster
18 Feb 2008 Tony: Add Wi-Fi Module FW2.0.0.89
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#24 GTA02 A5

current holder: John
18 Feb 2008 Tony: Add Wi-Fi Module FW2.0.0.89
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#23 GTA02 A5

current holder: JJ, battery vendor
12 Feb 2008 Willie: Install kernel image from lastest svn check out
12 Feb 2008 Tony: removed wifi module
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#22 GTA02 A5

current holder: Tim Lee
15 Feb 2008 Tony: Back to hardware team
13 Feb 2008 Erin: gsm modem is bad
12 Feb 2008 Tony: removed wifi module
12 Feb 2008 DKay: capacitor added
05 Feb 2008 batch of 30, PCBA fully assembled, wifi FW 1.3

#21 GTA02 A5

current holder: Matt
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad, GPS broken
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)

#20 GTA02 A5

current holder: Martin
05 Mar 2008 GPS antenna switch 2nd source test
21 Feb 2008 Miles: factory partition broken
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
13 Feb 2008 Miles take from Tony for PBE comparsion test
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)

#19 GTA02 A5

current holder: Brenda
27 Feb Add PMU capacitor
21 Feb 2008 Tony: Add WiFi FW 2.0.0.89
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)

#18 GTA02 A5

current holder: Tim Lee
15 Feb 2008 Willie: Send to hardware side and fix it. 12 Feb 2008 Willie: It will generate big noise, maybe it's a hardware issue. I will check this
12 Feb 2008 Erin: after booting to UI, the screen freezes, no any response. Willie is checking it now
09 Feb 2008 Erin: load uboot, kernel, rootfs by Sean Chiang, it can auto-camp to the network, can use dialer
01 Feb 2008 Miles: verified hardware, same exceptions as #1, Bluetooth sensitivity very bad
31 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
31 Jan 2008 Batch of 4 from Suzhou, PCBA with all modules, NOR protection disabled, full DM1 (v009) and DM2 (v012)

#17 GTA02 A5

current holder: Vitaly (Atheros)
01 Feb 2008 Delivered to Vitaly, Atheros
29 Jan 2008 Same as #1 until 29 Jan 2008

#16 GTA02 A5

current holder: Samuel
31 Jan 2008 Sent to Samuel
29 Jan 2008 Same as #1 until 29 Jan 2008

#15 GTA02 A5

current holder: Tony
31 Jan 2008 Running from battery shuts down 5 seconds after reboot. Running from power source (plugged into battery connectors) is stable
29 Jan 2008 Same as #1 until 29 Jan 2008

#14 GTA02 A5

current holder: Willie
27 Feb 2008 Willie: Get second phone
21 Feb 2008 Tony: switched wifi to FW 2.0.0.89
29 Jan 2008 Same as #1 until 29 Jan 2008

#13 GTA02 A5

current holder: Tony
29 Jan 2008 Miles: Bluetooth scan doesn't work, Power Key broken
29 Jan 2008 Same as #1 until 29 Jan 2008

#12 GTA02 A5

current holder: Tim Lee
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules

#11 GTA02 A5

current holder: Tim Lee
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules

#10 GTA02 A5

current holder: Tim Lee
29 Jan 2008 Same as #1 until 29 Jan 2008 Die. Because I connect the power supply and usb. Then I shutdown the power supply, and power on the power supply. Quickly, the phone is short.

#9 GTA02 A5

current holder: Matt
5 Feb 2008 There are some hardware components broken. The behavior of i2c accessing is strange. And its suspend current is quite high (14~15mA).
29 Jan 2008 Matt: Found out jack insert interrupt line is floating
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules

#8 GTA02 A5

current holder: Tim Lee
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 4) as PCBA without modules

#7 GTA02 A5

current holder: Tony
27 Feb Add PMU capacitor
21 Feb 2008 Tony: added receiver, switched to wifi FW 2.0.0.89
05 Feb 2008 Miles: removed receiver
29 Jan 2008 Miles: receiver test failed (receiver broken)
29 Jan 2008 Same as #1 until 29 Jan 2008

#6 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Tony
29 Jan 2008 Willie: verified

#5 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Willie: verified

#4 Highcell battery 3.7V 1200mAh with Coulomb counter (Tony)

current holder: Tony
04 Mar 2008 Returned to Tony who gave me two "end user" batteries instead.
08 Feb 2008 Got it. Passes power-on test.
30 Jan 2008 sent to Werner
29 Jan 2008 Willie: verified

#3 GTA02 A5

current holder: Tony
05 Feb 2008 Found solution: added capacitor
02 Feb 2008 I see similar behaviour to #15 today on battery + USB. Appears to be related to, eg, starting LCM backlight making power problems resulting in immediate shutdown. Current limit issue somehow?
01 Feb 2008 Behaving well.
29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1 until 29 Jan 2008

#2 GTA02 A5

current holder: Harald
29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1 until 29 Jan 2008

#1 GTA02 A5 (Werner)

current holder: Werner
05 Mar 2008 Vibrator seems to be broken or unnoticeably weak
04 Mar 2008 SD/MMC seems broken under Linux (same usage works fine on #51; u-boot can read from it)
11 Feb 2008 Verified NOR WP (with reworked debug v3)
09 Feb 2008 Rework: bypass VB_SYS with 10uF 0603 6V3 cer X5R
08 Feb 2008 Got it. Passes power-on test.
30 Jan 2008 sent to Werner
30 Jan 2008 Miles: verified hardware, same exceptions as below
30 Jan 2008 Allen Chang: reworked to add NOR protection (R2505 closed, R2506 opened)
29 Jan 2008 Miles: verified hardware, except for

  • microSD
  • suspend/resume
  • Bluetooth audio
  • Coulomb counter & motion sensor only low-level verification (no drivers)
  • USB host only low-level verification (no device)
  • charging (only 500mA verified), running on USB only, switching between charging modes
  • full memory verification
  • wakeup interrupts (WiFi, USB, GSM, motion sensors, 2 buttons, RTC, headphone jack)

28 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
28 Jan 2008 Tony: Rework wifi FW to 2.0.0.40
28 Jan 2008 Batch of 10 from Suzhou, PCBA with all modules, wifi FW 1.3, NOR protection disabled, full DM1 (v009) and DM2 (v012)