Prototypes

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (#1 GTA02 A5)
m
Line 35: Line 35:
 
current holder: Tony (may be fixed in future)<br>
 
current holder: Tony (may be fixed in future)<br>
 
29 Jan 2008 Miles: receiver test failed (receiver broken)<br>
 
29 Jan 2008 Miles: receiver test failed (receiver broken)<br>
29 Jan 2008 Same as #1
+
29 Jan 2008 Same as #1 until 29 Jan 2008
  
 
=== #6 Highcell battery 3.7V 1250mAh with Coulomb counter ===
 
=== #6 Highcell battery 3.7V 1250mAh with Coulomb counter ===
Line 48: Line 48:
 
=== #4 Highcell battery 3.7V 1200mAh with Coulomb counter ===
 
=== #4 Highcell battery 3.7V 1200mAh with Coulomb counter ===
 
current holder: Werner<br>
 
current holder: Werner<br>
29 Jan 2008 sent to Werner<br>
+
30 Jan 2008 sent to Werner<br>
 
29 Jan 2008 Willie: verified
 
29 Jan 2008 Willie: verified
 
   
 
   
Line 54: Line 54:
 
current holder: Andy<br>
 
current holder: Andy<br>
 
29 Jan 2008 sent to Andy<br>
 
29 Jan 2008 sent to Andy<br>
29 Jan 2008 Same as #1
+
29 Jan 2008 Same as #1 until 29 Jan 2008
  
 
=== #2 GTA02 A5 ===
 
=== #2 GTA02 A5 ===
 
current holder: Harald<br>
 
current holder: Harald<br>
 
29 Jan 2008 sent to Harald<br>
 
29 Jan 2008 sent to Harald<br>
29 Jan 2008 Same as #1
+
29 Jan 2008 Same as #1 until 29 Jan 2008
  
 
=== #1 GTA02 A5 ===
 
=== #1 GTA02 A5 ===

Revision as of 09:21, 30 January 2008

Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.

This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.

Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.

If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.

Contents

#12 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#11 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#10 GTA02 A5

current holder: Willie
28 Jan 2008 Willie: added GTA01 case, all modules (wifi FW 2.0.0.40)
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#9 GTA02 A5

current holder: Matt
29 Jan 2008 Matt: Found out jack insert interrupt line is floating
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#8 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#7 GTA02 A5

current holder: Tony (may be fixed in future)
29 Jan 2008 Miles: receiver test failed (receiver broken)
29 Jan 2008 Same as #1 until 29 Jan 2008

#6 Highcell battery 3.7V 1250mAh with Coulomb counter

current holder: Tony
29 Jan 2008 Willie: verified

#5 Highcell battery 3.7V 1250mAh with Coulomb counter

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Willie: verified

#4 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Werner
30 Jan 2008 sent to Werner
29 Jan 2008 Willie: verified

#3 GTA02 A5

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1 until 29 Jan 2008

#2 GTA02 A5

current holder: Harald
29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1 until 29 Jan 2008

#1 GTA02 A5

current holder: Werner
30 Jan 2008 sent to Werner
30 Jan 2008 Miles: verified hardware, same exceptions as below
30 Jan 2008 Allen Chang: reworked to add NOR protection (R2505 closed, R2506 opened)
29 Jan 2008 Miles: verified hardware, except for

  • microSD
  • suspend/resume
  • Bluetooth audio
  • Coulomb counter & motion sensor only low-level verification (no drivers)
  • USB host only low-level verification (no device)
  • charging (only 500mA verified), running on USB only, switching between charging modes
  • full memory verification
  • wakeup interrupts (WiFi, USB, GSM, motion sensors, 2 buttons, RTC, headphone jack)

28 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
28 Jan 2008 Tony: Rework wifi FW to 2.0.0.40
28 Jan 2008 Batch of 10 from Suzhou, PCBA with all modules, wifi FW 1.3, NOR protection disabled, full DM1 (v009) and DM2 (v012)

Personal tools

Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.

This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.

Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.

If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.

#12 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#11 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#10 GTA02 A5

current holder: Willie
28 Jan 2008 Willie: added GTA01 case, all modules (wifi FW 2.0.0.40)
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#9 GTA02 A5

current holder: Matt
29 Jan 2008 Matt: Found out jack insert interrupt line is floating
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#8 GTA02 A5

current holder: Tony (end of life)
21 Jan 2008 Allen: Added Bluetooth module, reworked for power measurements, broken
18 Jan 2008 Arrived from Suzhou (batch of 5) as PCBA without modules

#7 GTA02 A5

current holder: Tony (may be fixed in future)
29 Jan 2008 Miles: receiver test failed (receiver broken)
29 Jan 2008 Same as #1

#6 Highcell battery 3.7V 1250mAh with Coulomb counter

current holder: Tony
29 Jan 2008 Willie: verified

#5 Highcell battery 3.7V 1250mAh with Coulomb counter

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Willie: verified

#4 Highcell battery 3.7V 1200mAh with Coulomb counter

current holder: Werner
29 Jan 2008 sent to Werner
29 Jan 2008 Willie: verified

#3 GTA02 A5

current holder: Andy
29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1

#2 GTA02 A5

current holder: Harald
29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1

#1 GTA02 A5

current holder: Werner
30 Jan 2008 sent to Werner
30 Jan 2008 Miles: verified hardware, same exceptions as below
30 Jan 2008 Allen Chang: reworked to add NOR protection (R2505 closed, R2506 opened)
29 Jan 2008 Miles: verified hardware, except for

  • microSD
  • suspend/resume
  • Bluetooth audio
  • Coulomb counter & motion sensor only low-level verification (no drivers)
  • USB host only low-level verification (no device)
  • charging (only 500mA verified), running on USB only, switching between charging modes
  • full memory verification
  • wakeup interrupts (WiFi, USB, GSM, motion sensors, 2 buttons, RTC, headphone jack)

28 Jan 2008 Tony: Put inside GTA01 case, speaker, antennas
28 Jan 2008 Tony: Rework wifi FW to 2.0.0.40
28 Jan 2008 Batch of 10 from Suzhou, PCBA with all modules, wifi FW 1.3, NOR protection disabled, full DM1 (v009) and DM2 (v012)