Prototypes

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (#8 GTA02 A5)
m (#7 GTA02 A5)
Line 18: Line 18:
  
 
=== #7 GTA02 A5 ===
 
=== #7 GTA02 A5 ===
29 Jan 2008 Miles: receiver test failed (receiver broken)
+
29 Jan 2008 Miles: receiver test failed (receiver broken)<br>
 
29 Jan 2008 Same as #1
 
29 Jan 2008 Same as #1
  

Revision as of 13:16, 29 January 2008

Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.

This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.

Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.

If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.

Contents

#10 GTA02 A5

18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules

#9 GTA02 A5

18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules

#8 GTA02 A5

21 Jan 2008 Reworked for power measurements
18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules

#7 GTA02 A5

29 Jan 2008 Miles: receiver test failed (receiver broken)
29 Jan 2008 Same as #1

#6 Highcell battery 3.7V 1250mAh with Coulomb counter

29 Jan 2008 verified by Willie

#5 Highcell battery 3.7V 1250mAh with Coulomb counter

29 Jan 2008 sent to Andy
29 Jan 2008 verified by Willie

#4 Highcell battery 3.7V 1200mAh with Coulomb counter

29 Jan 2008 sent to Werner
29 Jan 2008 verified by Willie

#3 GTA02 A5

29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1

#2 GTA02 A5

29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1

#1 GTA02 A5

29 Jan 2008 sent to Werner
29 Jan 2008 hardware verified by Miles, except for

  • microSD
  • suspend/resume
  • Bluetooth audio
  • Coulomb counter & motion sensor only low-level verification (no drivers)
  • USB host only low-level verification (no device)
  • charging (only 500mA verified), running on USB only, switching between charging modes
  • full memory verification
  • wakeup interrupts (WiFi, USB, GSM, motion sensors, 2 buttons, RTC, headphone jack)

28 Jan 2008 Put inside GTA01 case, speaker, antennas
28 Jan 2008 Rework wifi FW to 2.0.0.40
28 Jan 2008 Arrived from Suzhou (batch of 10) as PCBA with all modules (wifi FW 1.3), full DM1 (v009) and DM2 (v012)

Personal tools

Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.

This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.

Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.

If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.

#10 GTA02 A5

18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules

#9 GTA02 A5

18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules

#8 GTA02 A5

21 Jan 2008 Reworked for power measurements
18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules

#7 GTA02 A5

29 Jan 2008 Miles: receiver test failed (receiver broken) 29 Jan 2008 Same as #1

#6 Highcell battery 3.7V 1250mAh with Coulomb counter

29 Jan 2008 verified by Willie

#5 Highcell battery 3.7V 1250mAh with Coulomb counter

29 Jan 2008 sent to Andy
29 Jan 2008 verified by Willie

#4 Highcell battery 3.7V 1200mAh with Coulomb counter

29 Jan 2008 sent to Werner
29 Jan 2008 verified by Willie

#3 GTA02 A5

29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1

#2 GTA02 A5

29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1

#1 GTA02 A5

29 Jan 2008 sent to Werner
29 Jan 2008 hardware verified by Miles, except for

  • microSD
  • suspend/resume
  • Bluetooth audio
  • Coulomb counter & motion sensor only low-level verification (no drivers)
  • USB host only low-level verification (no device)
  • charging (only 500mA verified), running on USB only, switching between charging modes
  • full memory verification
  • wakeup interrupts (WiFi, USB, GSM, motion sensors, 2 buttons, RTC, headphone jack)

28 Jan 2008 Put inside GTA01 case, speaker, antennas
28 Jan 2008 Rework wifi FW to 2.0.0.40
28 Jan 2008 Arrived from Suzhou (batch of 10) as PCBA with all modules (wifi FW 1.3), full DM1 (v009) and DM2 (v012)