Openmoko on HTC-Dream

From Openmoko

(Difference between revisions)
Jump to: navigation, search
Line 11: Line 11:
 
* USB-Ethernet
 
* USB-Ethernet
 
* Framebuffer console
 
* Framebuffer console
* Xfbdev
+
* Xorg
 
* Wifi
 
* Wifi
 
* Touchscreen
 
* Touchscreen
 
+
* Phonecalls
=== Should work, but not tested yet ===
+
* ALSA
* Phonecalls ( >_< )
+
 
+
=== Not fixed yet ===
+
* ALSA ( --> no mplayer -.- )
+
  
 
== Setup the rootfs ==
 
== Setup the rootfs ==
Line 26: Line 22:
 
**  First partition: vfat
 
**  First partition: vfat
 
** Second partition: ext2 (root)
 
** Second partition: ext2 (root)
* mount it and extract http://ftp.o2s.ch/pub/openmoko/images/shr-full-eglibc-ipk--20091106-htcdream.rootfs.tar.bz2 to it.
+
* mount it and extract http://ftp.o2s.ch/pub/openmoko/htcdream/repo/images/htcdream/shr-full-eglibc-ipk--20100509-htcdream.rootfs.tar.bz2 to it.
 
+
=== Use internal memory ===
+
Start into fastboot mode
+
wget http://ftp.o2s.ch/pub/openmoko/images/shr-fso-console-image-eglibc-ipk--20091106-htcdream.rootfs.yaffs2 -O system.yaffs2
+
fastboot flash userdata system.yaffs2
+
  
 
== Bootloader ==
 
== Bootloader ==
Line 40: Line 31:
 
=== Using precompiled image ===
 
=== Using precompiled image ===
 
Download an kernel image from:
 
Download an kernel image from:
* http://ftp.o2s.ch/pub/openmoko/kernel/
+
* http://ftp.o2s.ch/pub/openmoko/htcdream/repo/images/htcdream/zImage-2.6.32%2br17%2bgitr636fa4daf243826ef6cebb64dd0509f3b079fcb5-r17-htcdream.bin
 
(I had to disable anonymous ftp because some people misused it to upload copyrighted movies and pr0n. Sry. -- leviathan)
 
(I had to disable anonymous ftp because some people misused it to upload copyrighted movies and pr0n. Sry. -- leviathan)
 
Select -htcdream-fastboot_sd.bin for SD-card booting or -htcdream-fastboot_mtd.bin for booting from internal flash.
 
 
Rename it to openmoko-boot.img (to keep consistent with the howto ;) )
 
  
 
=== Building new kernel ===
 
=== Building new kernel ===
Line 53: Line 40:
  
 
  export HACK_DIR=`pwd`
 
  export HACK_DIR=`pwd`
  git clone git://gitorious.org/replicant/gnulinuxkernel.git
+
  git clone git://gitorious.org/htc-msm-2-6-32/leviathan-incoming.git
  cd gnulinuxkernel
+
  cd leviathan-incoming
  git checkout -b leviathan
+
  git checkout --track -b msm-gnuconform orgigin/msm-gnuconform
  git pull git://gitorious.org/replicant/gnulinuxkernel.git leviathan
+
  git pull
cp arch/arm/configs/openmoko .config
+
wget http://ftp.o2s.ch/defconfig_OE3 -O .config
 
  make CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ ARCH=arm
 
  make CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ ARCH=arm
 
  sudo make CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ ARCH=arm modules_install
 
  sudo make CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ ARCH=arm modules_install
  sudo mv /lib/modules/2.6.29-openmoko-msm /mnt/foo/lib/modules/
+
  sudo mv /lib/modules/2.6.32 /mnt/foo/lib/modules/
 
  sync
 
  sync
 
  umount /mnt/foo
 
  umount /mnt/foo
Line 75: Line 62:
 
==== For SD-card rootfs ====
 
==== For SD-card rootfs ====
 
  mkbootimg --cmdline "console=tty0 no_console_suspend=1 root=/dev/mmcblk0p2 rootdelay=2 fbcon=rotate:1" \
 
  mkbootimg --cmdline "console=tty0 no_console_suspend=1 root=/dev/mmcblk0p2 rootdelay=2 fbcon=rotate:1" \
  --kernel $HACK_DIR/gnulinuxkernel/arch/arm/boot/zImage \
+
  --kernel $HACK_DIR/leviathan-incoming/arch/arm/boot/zImage \
 
  --ramdisk ./newramdisk.cpio.gz -o openmoko-boot.img
 
  --ramdisk ./newramdisk.cpio.gz -o openmoko-boot.img
  
 
==== For internal rootfs ====
 
==== For internal rootfs ====
 
  mkbootimg --cmdline "console=tty0 no_console_suspend=1 root=/dev/mtdblock5 rootfstype=yaffs2 rootdelay=2 fbcon=rotate:1 rw" \
 
  mkbootimg --cmdline "console=tty0 no_console_suspend=1 root=/dev/mtdblock5 rootfstype=yaffs2 rootdelay=2 fbcon=rotate:1 rw" \
  --kernel $HACK_DIR/gnulinuxkernel/arch/arm/boot/zImage \
+
  --kernel $HACK_DIR/leviathan-incoming/arch/arm/boot/zImage \
 
  --ramdisk ./newramdisk.cpio.gz -o openmoko-boot.img
 
  --ramdisk ./newramdisk.cpio.gz -o openmoko-boot.img
  
Line 94: Line 81:
 
  mkdir firmware
 
  mkdir firmware
 
  cd firmware
 
  cd firmware
  wget http://ftp.o2s.ch/pub/openmoko/firmware-wl12xx/wl1251-fw.bin
+
  wget http://ftp.o2s.ch/pub/openmoko/htcdream/firmware-wl12xx/wl1251-fw.bin
  wget http://ftp.o2s.ch/pub/openmoko/firmware-wl12xx/wl1251-nvs.bin
+
  wget http://ftp.o2s.ch/pub/openmoko/htcdream/firmware-wl12xx/wl1251-nvs.bin
 
  scp * root@192.168.0.202:/lib/firmware/
 
  scp * root@192.168.0.202:/lib/firmware/
 
=== Driver ===
 
==== Install package ====
 
wget http://ftp.o2s.ch/pub/openmoko/packages/compat-wireless-msmwifi_2009-10-28-.4_htcdream.ipk
 
scp compat-wireless-msmwifi_2009-10-28-.4_htcdream.ipk root@192.168.0.202:~
 
ssh root@192.168.0.202
 
<enter>
 
opkg install compat-wireless-msmwifi_2009-10-28-.4_htcdream.ipk
 
 
==== Compiling ====
 
Download http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2 (broken)
 
I think now http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-old.tar.bz2
 
Unpack it.
 
Change into the folder.
 
 
make ARCH=arm CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ KLIB=$HACK_DIR/gnulinuxkernel KLIB_BUILD=$HACK_DIR/gnulinuxkernel "$@"
 
 
Change up
 
 
cd ..
 
 
Run following script
 
 
#!/bin/sh
 
compat=compat-wireless-2009-09-30/
 
mkdir modules/
 
for i in $compat/net/mac80211/mac80211.ko \
 
            $compat/net/wireless/cfg80211.ko \
 
            $compat/net/wireless/lib80211.ko \
 
            $compat/net/wireless/lib80211_crypt_wep.ko \
 
            $compat/net/wireless/lib80211_crypt_ccmp.ko \
 
            $compat/net/wireless/lib80211_crypt_tkip.ko \
 
            $compat/drivers/net/wireless/wl12xx/wl1251_sdio.ko \
 
            $compat/net/rfkill/rfkill_backport.ko \
 
            $compat/drivers/net/wireless/wl12xx/wl1251.ko; do
 
            cp $i modules/
 
done
 
 
Copy it onto your device
 
 
scp -r modules root@192.168.0.202:~
 
 
Connect to your device and start the networking:
 
 
insmod rfkill_backport.ko
 
insmod cfg80211.ko
 
insmod mac80211.ko
 
insmod lib80211.ko
 
insmod lib80211_crypt_tkip.ko
 
insmod lib80211_crypt_wep.ko
 
insmod lib80211_crypt_ccmp.ko
 
insmod wl1251.ko
 
insmod wl1251_sdio.ko
 
 
* http://bobcopeland.com/android_wifi.html
 
* Look onto this section with the calibration files
 
* http://htc-linux.org/wiki/index.php?title=WL1251
 
  
 
== Screenshots ==
 
== Screenshots ==

Revision as of 09:40, 9 May 2010

Contents

Introduction

HTC-Dream is a android based phone. Android is running on top of a Linux kernel. So we have basically no work to do using this kernel to boot an Openmoko user space. This work is done. I booted an Openmoko user space. The way to do it on your own is described below. For questions ask leviathan and GNUtoo in irc://irc.freenode.net/#htc-linux

Working

  • USB-Ethernet
  • Framebuffer console
  • Xorg
  • Wifi
  • Touchscreen
  • Phonecalls
  • ALSA

Setup the rootfs

Bootloader

You need to install fastboot. In order to do this, you will have need to have "root" on the existing Android device or already have a developer version of the bootloader installed.

Kernel

Using precompiled image

Download an kernel image from:

(I had to disable anonymous ftp because some people misused it to upload copyrighted movies and pr0n. Sry. -- leviathan)

Building new kernel

Use the kernel from the replicants. Fetch the kernel sourcecode from http://gitorious.org/replicant/gnulinuxkernel And configure it as you whish.

export HACK_DIR=`pwd`
git clone git://gitorious.org/htc-msm-2-6-32/leviathan-incoming.git
cd leviathan-incoming
git checkout --track -b msm-gnuconform orgigin/msm-gnuconform
git pull
wget http://ftp.o2s.ch/defconfig_OE3 -O .config
make CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ ARCH=arm
sudo make CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ ARCH=arm modules_install
sudo mv /lib/modules/2.6.32 /mnt/foo/lib/modules/
sync
umount /mnt/foo

Building boot.img

mkdir $HACK_DIR/mk_boot_img
cd $HACK_DIR/mk_boot_img
wget http://wiki.openmoko.org/images/9/92/Mkbootimg.bin
wget http://wiki.openmoko.org/images/f/f6/Newramdisk.cpio.gz
mv Newramdisk.cpio.gz newramdisk.cpio.gz
sudo cp Mkbootimg.bin /usr/bin/mkbootimg

For SD-card rootfs

mkbootimg --cmdline "console=tty0 no_console_suspend=1 root=/dev/mmcblk0p2 rootdelay=2 fbcon=rotate:1" \
--kernel $HACK_DIR/leviathan-incoming/arch/arm/boot/zImage \
--ramdisk ./newramdisk.cpio.gz -o openmoko-boot.img

For internal rootfs

mkbootimg --cmdline "console=tty0 no_console_suspend=1 root=/dev/mtdblock5 rootfstype=yaffs2 rootdelay=2 fbcon=rotate:1 rw" \
--kernel $HACK_DIR/leviathan-incoming/arch/arm/boot/zImage \
--ramdisk ./newramdisk.cpio.gz -o openmoko-boot.img

Flashing boot.img

  • Start into fastboot
  • execute
fastboot flash boot openmoko-boot.img
  • restart the phone
fastboot reboot

WLAN

Firmware

mkdir firmware
cd firmware
wget http://ftp.o2s.ch/pub/openmoko/htcdream/firmware-wl12xx/wl1251-fw.bin
wget http://ftp.o2s.ch/pub/openmoko/htcdream/firmware-wl12xx/wl1251-nvs.bin
scp * root@192.168.0.202:/lib/firmware/

Screenshots

Image.jpg Image2.jpg

Personal tools

Introduction

HTC-Dream is a android based phone. Android is running on top of a Linux kernel. So we have basically no work to do using this kernel to boot an Openmoko user space. This work is done. I booted an Openmoko user space. The way to do it on your own is described below. For questions ask leviathan and GNUtoo in irc://irc.freenode.net/#htc-linux

Working

  • USB-Ethernet
  • Framebuffer console
  • Xfbdev
  • Wifi
  • Touchscreen

Should work, but not tested yet

  • Phonecalls ( >_< )

Not fixed yet

  • ALSA ( --> no mplayer -.- )

Setup the rootfs

Use internal memory

Start into fastboot mode

wget http://ftp.o2s.ch/pub/openmoko/images/shr-fso-console-image-eglibc-ipk--20091106-htcdream.rootfs.yaffs2 -O system.yaffs2
fastboot flash userdata system.yaffs2

Bootloader

You need to install fastboot. In order to do this, you will have need to have "root" on the existing Android device or already have a developer version of the bootloader installed.

Kernel

Using precompiled image

Download an kernel image from:

(I had to disable anonymous ftp because some people misused it to upload copyrighted movies and pr0n. Sry. -- leviathan)

Select -htcdream-fastboot_sd.bin for SD-card booting or -htcdream-fastboot_mtd.bin for booting from internal flash.

Rename it to openmoko-boot.img (to keep consistent with the howto ;) )

Building new kernel

Use the kernel from the replicants. Fetch the kernel sourcecode from http://gitorious.org/replicant/gnulinuxkernel And configure it as you whish.

export HACK_DIR=`pwd`
git clone git://gitorious.org/replicant/gnulinuxkernel.git
cd gnulinuxkernel
git checkout -b leviathan
git pull git://gitorious.org/replicant/gnulinuxkernel.git leviathan
cp arch/arm/configs/openmoko .config
make CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ ARCH=arm
sudo make CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ ARCH=arm modules_install
sudo mv /lib/modules/2.6.29-openmoko-msm /mnt/foo/lib/modules/
sync
umount /mnt/foo

Building boot.img

mkdir $HACK_DIR/mk_boot_img
cd $HACK_DIR/mk_boot_img
wget http://wiki.openmoko.org/images/9/92/Mkbootimg.bin
wget http://wiki.openmoko.org/images/f/f6/Newramdisk.cpio.gz
mv Newramdisk.cpio.gz newramdisk.cpio.gz
sudo cp Mkbootimg.bin /usr/bin/mkbootimg

For SD-card rootfs

mkbootimg --cmdline "console=tty0 no_console_suspend=1 root=/dev/mmcblk0p2 rootdelay=2 fbcon=rotate:1" \
--kernel $HACK_DIR/gnulinuxkernel/arch/arm/boot/zImage \
--ramdisk ./newramdisk.cpio.gz -o openmoko-boot.img

For internal rootfs

mkbootimg --cmdline "console=tty0 no_console_suspend=1 root=/dev/mtdblock5 rootfstype=yaffs2 rootdelay=2 fbcon=rotate:1 rw" \
--kernel $HACK_DIR/gnulinuxkernel/arch/arm/boot/zImage \
--ramdisk ./newramdisk.cpio.gz -o openmoko-boot.img

Flashing boot.img

  • Start into fastboot
  • execute
fastboot flash boot openmoko-boot.img
  • restart the phone
fastboot reboot

WLAN

Firmware

mkdir firmware
cd firmware
wget http://ftp.o2s.ch/pub/openmoko/firmware-wl12xx/wl1251-fw.bin
wget http://ftp.o2s.ch/pub/openmoko/firmware-wl12xx/wl1251-nvs.bin
scp * root@192.168.0.202:/lib/firmware/

Driver

Install package

wget http://ftp.o2s.ch/pub/openmoko/packages/compat-wireless-msmwifi_2009-10-28-.4_htcdream.ipk
scp compat-wireless-msmwifi_2009-10-28-.4_htcdream.ipk root@192.168.0.202:~
ssh root@192.168.0.202
<enter>
opkg install compat-wireless-msmwifi_2009-10-28-.4_htcdream.ipk

Compiling

Download http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2 (broken) I think now http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-old.tar.bz2 Unpack it. Change into the folder.

make ARCH=arm CROSS_COMPILE=/usr/local/openmoko/arm/arm-angstrom-linux-gnueabi/bin/ KLIB=$HACK_DIR/gnulinuxkernel KLIB_BUILD=$HACK_DIR/gnulinuxkernel "$@"

Change up

cd ..

Run following script

#!/bin/sh
compat=compat-wireless-2009-09-30/
mkdir modules/
for i in $compat/net/mac80211/mac80211.ko \
           $compat/net/wireless/cfg80211.ko \
           $compat/net/wireless/lib80211.ko \
           $compat/net/wireless/lib80211_crypt_wep.ko \
           $compat/net/wireless/lib80211_crypt_ccmp.ko \
           $compat/net/wireless/lib80211_crypt_tkip.ko \
           $compat/drivers/net/wireless/wl12xx/wl1251_sdio.ko \
           $compat/net/rfkill/rfkill_backport.ko \
           $compat/drivers/net/wireless/wl12xx/wl1251.ko; do
           cp $i modules/
done

Copy it onto your device

scp -r modules root@192.168.0.202:~

Connect to your device and start the networking:

insmod rfkill_backport.ko
insmod cfg80211.ko
insmod mac80211.ko
insmod lib80211.ko
insmod lib80211_crypt_tkip.ko
insmod lib80211_crypt_wep.ko
insmod lib80211_crypt_ccmp.ko
insmod wl1251.ko
insmod wl1251_sdio.ko

Screenshots

Image.jpg Image2.jpg