View source for Openmoko:Usb light

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Template used on this page:

Return to Openmoko:Usb light.

Personal tools


One thing that i like on my older phone, a Sony Ericsson W800i, is the light (camera light, but you can use it without the camera). So i thought about a solution for my Freerunner and the result is the following article. At least ⇒ At own's risk ;)


  • Two leds
  • Two resitors
  • a miniusb B male connector
  • a bit solder
  • and a bit hot glue

and you have a light for your Freerunner :D





German Wikipedia-article about the universal serial bus ⇒


Cut the usb cable and seperate the rubber of the usbmini connector and remove the pins 2,3,4 (a lower risk of a short circuit). Now solder the components according to the schematic. WARNING ⇒ risk of a short circuit on the metal parts of the connector. Check the circuit without the metal part, if it works.

* without the metal part of the connector
* with the metal part of the connector
* with hot glue (i know its not very beautiful, but it works, it's robust and i have no short circuit ;)


When i searched for a good solution to activate the host-mode of the freerunner i found this blog entry

Joseph Reeves modified his usbmode-button package after a few suggestions by me and here is his new blog-article with Version 0.2

Thanks Joseph Reeves :D

You can toggle the host-mode on and off with a click on the icon. It works!




Improvements? Ideas!

It works but it's not very beautiful, perhaps you have any ideas. Mail me :D