OpenWrt/zh cn

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Configure target and packages)
(Enlightenment requirements)
Line 48: Line 48:
 
OpenWrt默认使用uclibc作为libc,你可以选择其他libc(如glibc)。菜单是:"[*] Advanced configuration options (for developers)" -> "---  Toolchain Options" -> "LIBC implementation".
 
OpenWrt默认使用uclibc作为libc,你可以选择其他libc(如glibc)。菜单是:"[*] Advanced configuration options (for developers)" -> "---  Toolchain Options" -> "LIBC implementation".
  
== Enlightenment requirements ==
+
== Enlightenment需求(Enlightenment requirements) ==
Currently to get the EFL (enlightenment and its libraries) compiled within OpenWrt you need to have recent executables of <eet> and <edje_cc> preinstalled on your host-system. This is just a temporary solution and will be changed soon. Common packages which distribute these binaries are named <edje> and <eet>.
+
就目前,通过OpenWrt来编译EFL(enlightenment及其库),你需要在主机上先安装<eet><edje_cc>的可执行程序。这是一个临时的解决方案,很快会改变这种方法。发布这些库的包的名字为<edje><eet>
If your distribution doesn't provide any recent e17 packages you can use [[Image:Openwrt_build_efl_host_tools.sh]] to fetch and build the required tools from e17 svn.
+
如果你的Linux系统上没有提供最近的e17包,你可以通过[[Image:Openwrt_build_efl_host_tools.sh]]从e17的svn上获取并生成所需的工具。
  
 +
'''警告:''' Openwrt_build_efl_host_tools.sh脚本在出错的时候不会提示,运行完后请检查build过程有无错误。
  
'''Warning:''' Openwrt_build_efl_host_tools.sh script doesn't halt on error, please check all build process.
+
'''警告:''' 如果e17工具安装在“/usr/local",记住要运行 `ldconfig`。
  
'''Warning:''' Remember to execute `ldconfig` if you have installed e17 tools in "/usr/local".
+
'''Debian Lenny用户提示:''' 在运行e17 buiding 脚本之前,先安装以下包 :  
 
+
'''Tips for Debian Lenny users:''' Install following packages before e17 buiding script :  
+
 
* building tools: automake autoconf autotools-dev libtool pkg-config
 
* building tools: automake autoconf autotools-dev libtool pkg-config
 
* e17 requirements: libjpeg62-dev libfreetype6-dev x11proto-xext-dev libxext-dev libpng12-dev
 
* e17 requirements: libjpeg62-dev libfreetype6-dev x11proto-xext-dev libxext-dev libpng12-dev

Revision as of 13:16, 26 April 2009


First you have to create a svn checkout of the OpenWrt base system

Contents

获取 OpenWrt 主干

svn co svn://svn.openwrt.org/openwrt/trunk openwrt

这个命令会下载获取OpenWrt的基本系统,并存储在当前目录下的openwrt文件夹中。 本文档后面将假设你的工作目录为openwrt,所以你要进入openwrt目录:

cd openwrt

添加应用程序包(Add packages from extra feeds)

   虽然基本系统可以build出FreeRunner的Image,但生成的Image缺少一些手机应用程序。这些程序有额外的种子地址,使用这些种子地址的方法如下:
cp feeds.conf.default feeds.conf
然后编辑feeds.conf文件,并去掉efl(针对enlightenment)或phone(针对fso, paroli, ...)前面的注释符号#,去掉#后文件内容可能就像下面:
src-svn packages svn://svn.openwrt.org/openwrt/packages
src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
src-svn luci http://svn.luci.subsignal.org/luci/branches/luci-0.8/contrib/package
src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
#src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce

请注意,这个设置并不表示这些应用程序包会被编译,而只是在后面使用menuconfig命令时会获取这些包的描述信息(OpenWrt-Makefiles)。

现在,更新下载这些包的(OpenWrt-Makefiles)并提供(安装)它们:

scripts/feeds update -a
scripts/feeds install -a

Configure target and packages

现在,你需要选择FreeRunner的目标平台。运行命令:

make menuconfig

Target System选项选择s3c24xx,Target Profile 你可以选择两者之一:

  • Openmoko GTA-02 (full): 你可能会选用这个,因为它包含了enlightenment 和 paroli。
  • Openmoko GTA-02 (minimal): 这个仅仅包含最基本的OpenWrt packages,可能只有shell和一些命令行程序.

现在你便可以选择一些额外的包安装到你的Image当中,注意要选择为[*],如果你选择为[M],这样的包会被编译但不会加入到Image中,你可以在以后再安装它。

如果你想改变Freerunner的IP地址,要选择“[*] Image configuration”,在子菜单中可以改变Image的网络配置。

OpenWrt默认使用uclibc作为libc,你可以选择其他libc(如glibc)。菜单是:"[*] Advanced configuration options (for developers)" -> "--- Toolchain Options" -> "LIBC implementation".

Enlightenment需求(Enlightenment requirements)

就目前,通过OpenWrt来编译EFL(enlightenment及其库),你需要在主机上先安装<eet>与<edje_cc>的可执行程序。这是一个临时的解决方案,很快会改变这种方法。发布这些库的包的名字为<edje>和<eet>。 如果你的Linux系统上没有提供最近的e17包,你可以通过File:Openwrt build efl host tools.sh从e17的svn上获取并生成所需的工具。

警告: Openwrt_build_efl_host_tools.sh脚本在出错的时候不会提示,运行完后请检查build过程有无错误。

警告: 如果e17工具安装在“/usr/local",记住要运行 `ldconfig`。

Debian Lenny用户提示: 在运行e17 buiding 脚本之前,先安装以下包 :

  • building tools: automake autoconf autotools-dev libtool pkg-config
  • e17 requirements: libjpeg62-dev libfreetype6-dev x11proto-xext-dev libxext-dev libpng12-dev

Build your OpenWrt image

If your done configuring the image you can build it by just running:

make

Warning: OpenWrt build system have more or less requirements depends on selected packages. Using GTA-02 full profile, we need:

  • subversion and git to retrieve some external sources. (On Debian Lenny: subversion git-core)
  • full autotools suite. (On Debian Lenny: automake autoconf autotools-dev libtool pkg-config)
  • dbus-binding-tool to be able to compile "gsm0710muxd". (On Debian Lenny: libdbus-glib-1-dev)
  • autopoint and cvs is used by enlightenment building process. (On Debian Lenny: gettext cvs)

This will now take some time. Please make sure you have enough free space left (~4 GB for full-profile). Instead you can use "make V=99" to get debug output to see what's going on / went wrong.

Flash Neo FreeRunner

When the build process is finished you will find a rootfs (openwrt-s3c24xx-2.6-root.jffs2-128k) and a kernel image (openwrt-s3c24xx-2.6-uImage) in the bin/ subfolder of your OpenWrt installation, which can be installed on your freerunner with the dfu util as normal.

Try it !

After flashing both images, reboot your phone and depending on what packages were built into the image (=you've selected) you might be able to initiate / receive phonecalls with your FreeRunner running OpenWrt :)

You can also reach the freerunner over usb network via telnet. SSH is also available after you have set up password for the root account (Run `passwd` in a telnet session).

Congratulations!

Please help us making this site better! Give feedback on the mailinglist (Openmoko as well as OpenWrt), change this site, file bug-reports or just tell us how much you love OpenWrt ;)

Personal tools


First you have to create a svn checkout of the OpenWrt base system

获取 OpenWrt 主干

svn co svn://svn.openwrt.org/openwrt/trunk openwrt

这个命令会下载获取OpenWrt的基本系统,并存储在当前目录下的openwrt文件夹中。 本文档后面将假设你的工作目录为openwrt,所以你要进入openwrt目录:

cd openwrt

添加应用程序包(Add packages from extra feeds)

   虽然基本系统可以build出FreeRunner的Image,但生成的Image缺少一些手机应用程序。这些程序有额外的种子地址,使用这些种子地址的方法如下:
cp feeds.conf.default feeds.conf
然后编辑feeds.conf文件,并去掉efl(针对enlightenment)或phone(针对fso, paroli, ...)前面的注释符号#,去掉#后文件内容可能就像下面:
src-svn packages svn://svn.openwrt.org/openwrt/packages
src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
src-svn luci http://svn.luci.subsignal.org/luci/branches/luci-0.8/contrib/package
src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
#src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce

请注意,这个设置并不表示这些应用程序包会被编译,而只是在后面使用menuconfig命令时会获取这些包的描述信息(OpenWrt-Makefiles)。

现在,更新下载这些包的(OpenWrt-Makefiles)并提供(安装)它们:

scripts/feeds update -a
scripts/feeds install -a

Configure target and packages

现在,你需要选择FreeRunner的目标平台。运行命令:

make menuconfig

Target System选项选择s3c24xx,Target Profile 你可以选择两者之一:

  • Openmoko GTA-02 (full): 你可能会选用这个,因为它包含了enlightenment 和 paroli。
  • Openmoko GTA-02 (minimal): 这个仅仅包含最基本的OpenWrt packages,可能只有shell和一些命令行程序.

现在你便可以选择一些额外的包安装到你的Image当中,注意要选择为[*],如果你选择为[M],这样的包会被编译但不会加入到Image中,你可以在以后再安装它。

如果你想改变Freerunner的IP地址,要选择“[*] Image configuration”,在子菜单中可以改变Image的网络配置。

OpenWrt默认使用uclibc作为libc,你可以选择其他libc(如glibc)。菜单是:"[*] Advanced configuration options (for developers)" -> "--- Toolchain Options" -> "LIBC implementation".

Enlightenment requirements

Currently to get the EFL (enlightenment and its libraries) compiled within OpenWrt you need to have recent executables of <eet> and <edje_cc> preinstalled on your host-system. This is just a temporary solution and will be changed soon. Common packages which distribute these binaries are named <edje> and <eet>. If your distribution doesn't provide any recent e17 packages you can use File:Openwrt build efl host tools.sh to fetch and build the required tools from e17 svn.


Warning: Openwrt_build_efl_host_tools.sh script doesn't halt on error, please check all build process.

Warning: Remember to execute `ldconfig` if you have installed e17 tools in "/usr/local".

Tips for Debian Lenny users: Install following packages before e17 buiding script :

  • building tools: automake autoconf autotools-dev libtool pkg-config
  • e17 requirements: libjpeg62-dev libfreetype6-dev x11proto-xext-dev libxext-dev libpng12-dev

Build your OpenWrt image

If your done configuring the image you can build it by just running:

make

Warning: OpenWrt build system have more or less requirements depends on selected packages. Using GTA-02 full profile, we need:

  • subversion and git to retrieve some external sources. (On Debian Lenny: subversion git-core)
  • full autotools suite. (On Debian Lenny: automake autoconf autotools-dev libtool pkg-config)
  • dbus-binding-tool to be able to compile "gsm0710muxd". (On Debian Lenny: libdbus-glib-1-dev)
  • autopoint and cvs is used by enlightenment building process. (On Debian Lenny: gettext cvs)

This will now take some time. Please make sure you have enough free space left (~4 GB for full-profile). Instead you can use "make V=99" to get debug output to see what's going on / went wrong.

Flash Neo FreeRunner

When the build process is finished you will find a rootfs (openwrt-s3c24xx-2.6-root.jffs2-128k) and a kernel image (openwrt-s3c24xx-2.6-uImage) in the bin/ subfolder of your OpenWrt installation, which can be installed on your freerunner with the dfu util as normal.

Try it !

After flashing both images, reboot your phone and depending on what packages were built into the image (=you've selected) you might be able to initiate / receive phonecalls with your FreeRunner running OpenWrt :)

You can also reach the freerunner over usb network via telnet. SSH is also available after you have set up password for the root account (Run `passwd` in a telnet session).

Congratulations!

Please help us making this site better! Give feedback on the mailinglist (Openmoko as well as OpenWrt), change this site, file bug-reports or just tell us how much you love OpenWrt ;)