OpenWrt/zh cn

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Configure target and packages)
(Configure target and packages)
Line 42: Line 42:
 
* '''Openmoko GTA-02 (minimal)''': 这个仅仅包含最基本的OpenWrt packages,可能只有shell和一些命令行程序.
 
* '''Openmoko GTA-02 (minimal)''': 这个仅仅包含最基本的OpenWrt packages,可能只有shell和一些命令行程序.
  
You now can also select additional packages you want to be installed in your image. Make sure you select as build in [*] else [M] you'll only get the packages but they will not be in the image, but can be installed later on.
+
现在你便可以选择一些额外的包安装到你的Image当中,注意要选择为[*],如果你选择为[M],这样的包会被编译但不会加入到Image中,你可以在以后再安装它。
  
You maybe also want to change the IP address under which the freerunner will be reachable. To do so select "[*] Image configuration". In its submenu you can change the images network configuration.
+
如果你想改变Freerunner的IP地址,要选择“[*] Image configuration”,在子菜单中可以改变Image的网络配置。
  
Per default OpenWrt is using the uclibc as libc implementation. You can use another libc (e.g. the glibc) by changing that via "[*] Advanced configuration options (for developers)" -> "---  Toolchain Options" -> "LIBC implementation".
+
OpenWrt默认使用uclibc作为libc,你可以选择其他libc(如glibc)。菜单是:
 +
"[*] Advanced configuration options (for developers)" -> "---  Toolchain Options" -> "LIBC implementation".
  
 
== Enlightenment requirements ==
 
== Enlightenment requirements ==

Revision as of 13:03, 26 April 2009


First you have to create a svn checkout of the OpenWrt base system

Contents

获取 OpenWrt 主干

svn co svn://svn.openwrt.org/openwrt/trunk openwrt

这个命令会下载获取OpenWrt的基本系统,并存储在当前目录下的openwrt文件夹中。 本文档后面将假设你的工作目录为openwrt,所以你要进入openwrt目录:

cd openwrt

添加应用程序包(Add packages from extra feeds)

   虽然基本系统可以build出FreeRunner的Image,但生成的Image缺少一些手机应用程序。这些程序有额外的种子地址,使用这些种子地址的方法如下:
cp feeds.conf.default feeds.conf
然后编辑feeds.conf文件,并去掉efl(针对enlightenment)或phone(针对fso, paroli, ...)前面的注释符号#,去掉#后文件内容可能就像下面:
src-svn packages svn://svn.openwrt.org/openwrt/packages
src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
src-svn luci http://svn.luci.subsignal.org/luci/branches/luci-0.8/contrib/package
src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
#src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce

请注意,这个设置并不表示这些应用程序包会被编译,而只是在后面使用menuconfig命令时会获取这些包的描述信息(OpenWrt-Makefiles)。

现在,更新下载这些包的(OpenWrt-Makefiles)并提供(安装)它们:

scripts/feeds update -a
scripts/feeds install -a

Configure target and packages

现在,你需要选择FreeRunner的目标平台。运行命令:

make menuconfig

Target System选项选择s3c24xx,Target Profile 你可以选择两者之一:

  • Openmoko GTA-02 (full): 你可能会选用这个,因为它包含了enlightenment 和 paroli。
  • Openmoko GTA-02 (minimal): 这个仅仅包含最基本的OpenWrt packages,可能只有shell和一些命令行程序.

现在你便可以选择一些额外的包安装到你的Image当中,注意要选择为[*],如果你选择为[M],这样的包会被编译但不会加入到Image中,你可以在以后再安装它。

如果你想改变Freerunner的IP地址,要选择“[*] Image configuration”,在子菜单中可以改变Image的网络配置。

OpenWrt默认使用uclibc作为libc,你可以选择其他libc(如glibc)。菜单是:

"[*] Advanced configuration options (for developers)" -> "---   Toolchain Options" -> "LIBC implementation".

Enlightenment requirements

Currently to get the EFL (enlightenment and its libraries) compiled within OpenWrt you need to have recent executables of <eet> and <edje_cc> preinstalled on your host-system. This is just a temporary solution and will be changed soon. Common packages which distribute these binaries are named <edje> and <eet>. If your distribution doesn't provide any recent e17 packages you can use File:Openwrt build efl host tools.sh to fetch and build the required tools from e17 svn.


Warning: Openwrt_build_efl_host_tools.sh script doesn't halt on error, please check all build process.

Warning: Remember to execute `ldconfig` if you have installed e17 tools in "/usr/local".

Tips for Debian Lenny users: Install following packages before e17 buiding script :

  • building tools: automake autoconf autotools-dev libtool pkg-config
  • e17 requirements: libjpeg62-dev libfreetype6-dev x11proto-xext-dev libxext-dev libpng12-dev

Build your OpenWrt image

If your done configuring the image you can build it by just running:

make

Warning: OpenWrt build system have more or less requirements depends on selected packages. Using GTA-02 full profile, we need:

  • subversion and git to retrieve some external sources. (On Debian Lenny: subversion git-core)
  • full autotools suite. (On Debian Lenny: automake autoconf autotools-dev libtool pkg-config)
  • dbus-binding-tool to be able to compile "gsm0710muxd". (On Debian Lenny: libdbus-glib-1-dev)
  • autopoint and cvs is used by enlightenment building process. (On Debian Lenny: gettext cvs)

This will now take some time. Please make sure you have enough free space left (~4 GB for full-profile). Instead you can use "make V=99" to get debug output to see what's going on / went wrong.

Flash Neo FreeRunner

When the build process is finished you will find a rootfs (openwrt-s3c24xx-2.6-root.jffs2-128k) and a kernel image (openwrt-s3c24xx-2.6-uImage) in the bin/ subfolder of your OpenWrt installation, which can be installed on your freerunner with the dfu util as normal.

Try it !

After flashing both images, reboot your phone and depending on what packages were built into the image (=you've selected) you might be able to initiate / receive phonecalls with your FreeRunner running OpenWrt :)

You can also reach the freerunner over usb network via telnet. SSH is also available after you have set up password for the root account (Run `passwd` in a telnet session).

Congratulations!

Please help us making this site better! Give feedback on the mailinglist (Openmoko as well as OpenWrt), change this site, file bug-reports or just tell us how much you love OpenWrt ;)

Personal tools


First you have to create a svn checkout of the OpenWrt base system

获取 OpenWrt 主干

svn co svn://svn.openwrt.org/openwrt/trunk openwrt

这个命令会下载获取OpenWrt的基本系统,并存储在当前目录下的openwrt文件夹中。 本文档后面将假设你的工作目录为openwrt,所以你要进入openwrt目录:

cd openwrt

添加应用程序包(Add packages from extra feeds)

   虽然基本系统可以build出FreeRunner的Image,但生成的Image缺少一些手机应用程序。这些程序有额外的种子地址,使用这些种子地址的方法如下:
cp feeds.conf.default feeds.conf
然后编辑feeds.conf文件,并去掉efl(针对enlightenment)或phone(针对fso, paroli, ...)前面的注释符号#,去掉#后文件内容可能就像下面:
src-svn packages svn://svn.openwrt.org/openwrt/packages
src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
src-svn luci http://svn.luci.subsignal.org/luci/branches/luci-0.8/contrib/package
src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
#src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce

请注意,这个设置并不表示这些应用程序包会被编译,而只是在后面使用menuconfig命令时会获取这些包的描述信息(OpenWrt-Makefiles)。

现在,更新下载这些包的(OpenWrt-Makefiles)并提供(安装)它们:

scripts/feeds update -a
scripts/feeds install -a

Configure target and packages

现在,你需要选择FreeRunner的目标平台。运行命令:

make menuconfig

Target System选项选择s3c24xx,Target Profile 你可以选择两者之一:

  • Openmoko GTA-02 (full): 你可能会选用这个,因为它包含了enlightenment 和 paroli。
  • Openmoko GTA-02 (minimal): 这个仅仅包含最基本的OpenWrt packages,可能只有shell和一些命令行程序.

You now can also select additional packages you want to be installed in your image. Make sure you select as build in [*] else [M] you'll only get the packages but they will not be in the image, but can be installed later on.

You maybe also want to change the IP address under which the freerunner will be reachable. To do so select "[*] Image configuration". In its submenu you can change the images network configuration.

Per default OpenWrt is using the uclibc as libc implementation. You can use another libc (e.g. the glibc) by changing that via "[*] Advanced configuration options (for developers)" -> "--- Toolchain Options" -> "LIBC implementation".

Enlightenment requirements

Currently to get the EFL (enlightenment and its libraries) compiled within OpenWrt you need to have recent executables of <eet> and <edje_cc> preinstalled on your host-system. This is just a temporary solution and will be changed soon. Common packages which distribute these binaries are named <edje> and <eet>. If your distribution doesn't provide any recent e17 packages you can use File:Openwrt build efl host tools.sh to fetch and build the required tools from e17 svn.


Warning: Openwrt_build_efl_host_tools.sh script doesn't halt on error, please check all build process.

Warning: Remember to execute `ldconfig` if you have installed e17 tools in "/usr/local".

Tips for Debian Lenny users: Install following packages before e17 buiding script :

  • building tools: automake autoconf autotools-dev libtool pkg-config
  • e17 requirements: libjpeg62-dev libfreetype6-dev x11proto-xext-dev libxext-dev libpng12-dev

Build your OpenWrt image

If your done configuring the image you can build it by just running:

make

Warning: OpenWrt build system have more or less requirements depends on selected packages. Using GTA-02 full profile, we need:

  • subversion and git to retrieve some external sources. (On Debian Lenny: subversion git-core)
  • full autotools suite. (On Debian Lenny: automake autoconf autotools-dev libtool pkg-config)
  • dbus-binding-tool to be able to compile "gsm0710muxd". (On Debian Lenny: libdbus-glib-1-dev)
  • autopoint and cvs is used by enlightenment building process. (On Debian Lenny: gettext cvs)

This will now take some time. Please make sure you have enough free space left (~4 GB for full-profile). Instead you can use "make V=99" to get debug output to see what's going on / went wrong.

Flash Neo FreeRunner

When the build process is finished you will find a rootfs (openwrt-s3c24xx-2.6-root.jffs2-128k) and a kernel image (openwrt-s3c24xx-2.6-uImage) in the bin/ subfolder of your OpenWrt installation, which can be installed on your freerunner with the dfu util as normal.

Try it !

After flashing both images, reboot your phone and depending on what packages were built into the image (=you've selected) you might be able to initiate / receive phonecalls with your FreeRunner running OpenWrt :)

You can also reach the freerunner over usb network via telnet. SSH is also available after you have set up password for the root account (Run `passwd` in a telnet session).

Congratulations!

Please help us making this site better! Give feedback on the mailinglist (Openmoko as well as OpenWrt), change this site, file bug-reports or just tell us how much you love OpenWrt ;)