OpenWrt/zh cn

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Fetching OpenWrt trunk)
(Add packages from extra feeds)
Line 11: Line 11:
 
  cd openwrt
 
  cd openwrt
  
== Add packages from extra feeds ==
+
== 添加应用程序包(Add packages from extra feeds) ==
Although this is sufficient enough to build an image for the freerunner you will not be able to build a lot of packages useful on your phone. Those packages are in extra feeds. To enable those feeds:
+
    虽然基本系统可以build出FreeRunner的Image,但生成的Image缺少一些手机应用程序。这些程序有额外的种子地址,使用这些种子地址的方法如下:
  
 
  cp feeds.conf.default feeds.conf
 
  cp feeds.conf.default feeds.conf
  
Then edit your feeds.conf and enable the efl (for enlightenment) and phone (for fso, paroli, ...) feeds, by removing the '#' at the beginning of these lines, so that it might look like:
+
然后编辑feeds.conf文件,并去掉efl(针对enlightenment)或phone(针对fso, paroli, ...)前面的注释符号#,去掉#后文件内容可能就像下面:
  
 
  src-svn packages svn://svn.openwrt.org/openwrt/packages
 
  src-svn packages svn://svn.openwrt.org/openwrt/packages
Line 26: Line 26:
 
  #src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce
 
  #src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce
  
Please mind that this config does not define what packages will be compiled - it just defines which package-descriptions (OpenWrt-Makefiles) will be fetched which will be listed within the menuconfig later.
+
请注意,这个设置并不表示这些应用程序包会被编译,而只是在后面使用menuconfig命令时会获取这些包的描述信息(OpenWrt-Makefiles)。
  
After that update your feeds to download the OpenWrt-Makefiles of these packages and provide (install) them
+
现在,更新下载这些包的(OpenWrt-Makefiles)并提供(安装)它们:
  
 
  scripts/feeds update -a
 
  scripts/feeds update -a

Revision as of 12:21, 26 April 2009


First you have to create a svn checkout of the OpenWrt base system

Contents

获取 OpenWrt 主干

svn co svn://svn.openwrt.org/openwrt/trunk openwrt

这个命令会下载获取OpenWrt的基本系统,并存储在当前目录下的openwrt文件夹中。 本文档后面将假设你的工作目录为openwrt,所以你要进入openwrt目录:

cd openwrt

添加应用程序包(Add packages from extra feeds)

   虽然基本系统可以build出FreeRunner的Image,但生成的Image缺少一些手机应用程序。这些程序有额外的种子地址,使用这些种子地址的方法如下:
cp feeds.conf.default feeds.conf
然后编辑feeds.conf文件,并去掉efl(针对enlightenment)或phone(针对fso, paroli, ...)前面的注释符号#,去掉#后文件内容可能就像下面:
src-svn packages svn://svn.openwrt.org/openwrt/packages
src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
src-svn luci http://svn.luci.subsignal.org/luci/branches/luci-0.8/contrib/package
src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
#src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce

请注意,这个设置并不表示这些应用程序包会被编译,而只是在后面使用menuconfig命令时会获取这些包的描述信息(OpenWrt-Makefiles)。

现在,更新下载这些包的(OpenWrt-Makefiles)并提供(安装)它们:

scripts/feeds update -a
scripts/feeds install -a

Configure target and packages

Now you'll have to select the target platform for the freerunner. Run

make menuconfig

and select s3c24xx as the Target System. As Target Profile you have to choice between

  • Openmoko GTA-02 (full): This is the one you probably want since it has enlightenment and paroli preselected.
  • Openmoko GTA-02 (minimal): This profile contains only the basic OpenWrt packages, so you'll only get a shell and some command-line utils.

You now can also select additional packages you want to be installed in your image. Make sure you select as build in [*] else [M] you'll only get the packages but they will not be in the image, but can be installed later on.

You maybe also want to change the IP address under which the freerunner will be reachable. To do so select "[*] Image configuration". In its submenu you can change the images network configuration.

Per default OpenWrt is using the uclibc as libc implementation. You can use another libc (e.g. the glibc) by changing that via "[*] Advanced configuration options (for developers)" -> "--- Toolchain Options" -> "LIBC implementation".

Enlightenment requirements

Currently to get the EFL (enlightenment and its libraries) compiled within OpenWrt you need to have recent executables of <eet> and <edje_cc> preinstalled on your host-system. This is just a temporary solution and will be changed soon. Common packages which distribute these binaries are named <edje> and <eet>. If your distribution doesn't provide any recent e17 packages you can use File:Openwrt build efl host tools.sh to fetch and build the required tools from e17 svn.


Warning: Openwrt_build_efl_host_tools.sh script doesn't halt on error, please check all build process.

Warning: Remember to execute `ldconfig` if you have installed e17 tools in "/usr/local".

Tips for Debian Lenny users: Install following packages before e17 buiding script :

  • building tools: automake autoconf autotools-dev libtool pkg-config
  • e17 requirements: libjpeg62-dev libfreetype6-dev x11proto-xext-dev libxext-dev libpng12-dev

Build your OpenWrt image

If your done configuring the image you can build it by just running:

make

Warning: OpenWrt build system have more or less requirements depends on selected packages. Using GTA-02 full profile, we need:

  • subversion and git to retrieve some external sources. (On Debian Lenny: subversion git-core)
  • full autotools suite. (On Debian Lenny: automake autoconf autotools-dev libtool pkg-config)
  • dbus-binding-tool to be able to compile "gsm0710muxd". (On Debian Lenny: libdbus-glib-1-dev)
  • autopoint and cvs is used by enlightenment building process. (On Debian Lenny: gettext cvs)

This will now take some time. Please make sure you have enough free space left (~4 GB for full-profile). Instead you can use "make V=99" to get debug output to see what's going on / went wrong.

Flash Neo FreeRunner

When the build process is finished you will find a rootfs (openwrt-s3c24xx-2.6-root.jffs2-128k) and a kernel image (openwrt-s3c24xx-2.6-uImage) in the bin/ subfolder of your OpenWrt installation, which can be installed on your freerunner with the dfu util as normal.

Try it !

After flashing both images, reboot your phone and depending on what packages were built into the image (=you've selected) you might be able to initiate / receive phonecalls with your FreeRunner running OpenWrt :)

You can also reach the freerunner over usb network via telnet. SSH is also available after you have set up password for the root account (Run `passwd` in a telnet session).

Congratulations!

Please help us making this site better! Give feedback on the mailinglist (Openmoko as well as OpenWrt), change this site, file bug-reports or just tell us how much you love OpenWrt ;)

Personal tools


First you have to create a svn checkout of the OpenWrt base system

获取 OpenWrt 主干

svn co svn://svn.openwrt.org/openwrt/trunk openwrt

这个命令会下载获取OpenWrt的基本系统,并存储在当前目录下的openwrt文件夹中。 本文档后面将假设你的工作目录为openwrt,所以你要进入openwrt目录:

cd openwrt

Add packages from extra feeds

Although this is sufficient enough to build an image for the freerunner you will not be able to build a lot of packages useful on your phone. Those packages are in extra feeds. To enable those feeds:

cp feeds.conf.default feeds.conf

Then edit your feeds.conf and enable the efl (for enlightenment) and phone (for fso, paroli, ...) feeds, by removing the '#' at the beginning of these lines, so that it might look like:

src-svn packages svn://svn.openwrt.org/openwrt/packages
src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
src-svn luci http://svn.luci.subsignal.org/luci/branches/luci-0.8/contrib/package
src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
#src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce

Please mind that this config does not define what packages will be compiled - it just defines which package-descriptions (OpenWrt-Makefiles) will be fetched which will be listed within the menuconfig later.

After that update your feeds to download the OpenWrt-Makefiles of these packages and provide (install) them

scripts/feeds update -a
scripts/feeds install -a

Configure target and packages

Now you'll have to select the target platform for the freerunner. Run

make menuconfig

and select s3c24xx as the Target System. As Target Profile you have to choice between

  • Openmoko GTA-02 (full): This is the one you probably want since it has enlightenment and paroli preselected.
  • Openmoko GTA-02 (minimal): This profile contains only the basic OpenWrt packages, so you'll only get a shell and some command-line utils.

You now can also select additional packages you want to be installed in your image. Make sure you select as build in [*] else [M] you'll only get the packages but they will not be in the image, but can be installed later on.

You maybe also want to change the IP address under which the freerunner will be reachable. To do so select "[*] Image configuration". In its submenu you can change the images network configuration.

Per default OpenWrt is using the uclibc as libc implementation. You can use another libc (e.g. the glibc) by changing that via "[*] Advanced configuration options (for developers)" -> "--- Toolchain Options" -> "LIBC implementation".

Enlightenment requirements

Currently to get the EFL (enlightenment and its libraries) compiled within OpenWrt you need to have recent executables of <eet> and <edje_cc> preinstalled on your host-system. This is just a temporary solution and will be changed soon. Common packages which distribute these binaries are named <edje> and <eet>. If your distribution doesn't provide any recent e17 packages you can use File:Openwrt build efl host tools.sh to fetch and build the required tools from e17 svn.


Warning: Openwrt_build_efl_host_tools.sh script doesn't halt on error, please check all build process.

Warning: Remember to execute `ldconfig` if you have installed e17 tools in "/usr/local".

Tips for Debian Lenny users: Install following packages before e17 buiding script :

  • building tools: automake autoconf autotools-dev libtool pkg-config
  • e17 requirements: libjpeg62-dev libfreetype6-dev x11proto-xext-dev libxext-dev libpng12-dev

Build your OpenWrt image

If your done configuring the image you can build it by just running:

make

Warning: OpenWrt build system have more or less requirements depends on selected packages. Using GTA-02 full profile, we need:

  • subversion and git to retrieve some external sources. (On Debian Lenny: subversion git-core)
  • full autotools suite. (On Debian Lenny: automake autoconf autotools-dev libtool pkg-config)
  • dbus-binding-tool to be able to compile "gsm0710muxd". (On Debian Lenny: libdbus-glib-1-dev)
  • autopoint and cvs is used by enlightenment building process. (On Debian Lenny: gettext cvs)

This will now take some time. Please make sure you have enough free space left (~4 GB for full-profile). Instead you can use "make V=99" to get debug output to see what's going on / went wrong.

Flash Neo FreeRunner

When the build process is finished you will find a rootfs (openwrt-s3c24xx-2.6-root.jffs2-128k) and a kernel image (openwrt-s3c24xx-2.6-uImage) in the bin/ subfolder of your OpenWrt installation, which can be installed on your freerunner with the dfu util as normal.

Try it !

After flashing both images, reboot your phone and depending on what packages were built into the image (=you've selected) you might be able to initiate / receive phonecalls with your FreeRunner running OpenWrt :)

You can also reach the freerunner over usb network via telnet. SSH is also available after you have set up password for the root account (Run `passwd` in a telnet session).

Congratulations!

Please help us making this site better! Give feedback on the mailinglist (Openmoko as well as OpenWrt), change this site, file bug-reports or just tell us how much you love OpenWrt ;)