|Line 108:||Line 108:|
Revision as of 07:47, 19 July 2009
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català
Use pre-built image
Build custom image
Fetching OpenWrt trunk
First you have to create a svn checkout of the OpenWrt base system
svn co svn://svn.openwrt.org/openwrt/trunk openwrt
The command will fetch the OpenWrt base system and put it into the openwrt subfolder of your current working directory. From now on this HOWTO assumes that your working direcory will be the newly created openwrt folder.
Add packages from extra feeds
Although this is sufficient enough to build an image for the freerunner you will not be able to build a lot of packages useful on your phone. Those packages are in extra feeds. To enable those feeds:
cp feeds.conf.default feeds.conf
Then edit your feeds.conf and enable the efl (for enlightenment) and phone (for fso, paroli, ...) feeds, by removing the '#' at the beginning of these lines, so that it might look like:
src-svn packages svn://svn.openwrt.org/openwrt/packages src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package src-svn luci http://svn.luci.subsignal.org/luci/branches/luci-0.8/contrib/package src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop #src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce
Please mind that this config does not define what packages will be compiled - it just defines which package-descriptions (OpenWrt-Makefiles) will be fetched which will be listed within the menuconfig later.
After that update your feeds to download the OpenWrt-Makefiles of these packages and provide (install) them
scripts/feeds update -a scripts/feeds install -a
Configure target and packages
Now you'll have to select the target platform for the freerunner. Run
and select s3c24xx as the Target System. As Target Profile you have to choice between
- Openmoko GTA-02 (full): This is the one you probably want since it has enlightenment and paroli preselected.
- Openmoko GTA-02 (minimal): This profile contains only the basic OpenWrt packages, so you'll only get a shell and some command-line utils.
You now can also select additional packages you want to be installed in your image. Make sure you select as build in [*] else [M] you'll only get the packages but they will not be in the image, but can be installed later on.
You maybe also want to change the IP address under which the freerunner will be reachable. To do so select "[*] Image configuration". In its submenu you can change the images network configuration.
Per default OpenWrt is using the uclibc as libc implementation. You can use another libc (e.g. the glibc) by changing that via "[*] Advanced configuration options (for developers)" -> "--- Toolchain Options" -> "LIBC implementation".
Build your OpenWrt image
If your done configuring the image you can build it by just running:
Warning: OpenWrt build system have more or less requirements depends on selected packages. Using GTA-02 full profile, we need:
- subversion and git to retrieve some external sources. (On Debian Lenny: subversion git-core)
- full autotools suite. (On Debian Lenny: automake autoconf autotools-dev libtool pkg-config)
- dbus-binding-tool to be able to compile "gsm0710muxd". (On Debian Lenny: libdbus-glib-1-dev)
- autopoint and cvs is used by enlightenment building process. (On Debian Lenny: gettext cvs)
This will now take some time. Please make sure you have enough free space left (~4 GB for full-profile). Instead you can use "make V=99" to get debug output to see what's going on / went wrong.
Flash Neo FreeRunner
When the build process is finished you will find a rootfs (openwrt-s3c24xx-2.6-root.jffs2-128k) and a kernel image (openwrt-s3c24xx-2.6-uImage) in the bin/ subfolder of your OpenWrt installation, which can be installed on your freerunner with the dfu util as normal.
Try it !
After flashing both images, reboot your phone and depending on what packages were built into the image (which are the packages you've selected) you might be able to initiate and receive phonecalls with your FreeRunner running OpenWrt :)
You can also reach the Freerunner over usb network as usual but Freerunner under OpenWrt have 192.168.1.1 IP address as default. To be able to SSH your phone, you must setup a password using telnet:
$ telnet 192.168.1.1 Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. === IMPORTANT ============================ Use 'passwd' to set your login password this will disable telnet and enable SSH ------------------------------------------ . BusyBox v1.13.4 (2009-07-06 01:59:55 CEST) built-in shell (ash) Enter 'help' for a list of built-in commands. . _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M KAMIKAZE (bleeding edge, r16703) ------------------- * 10 oz Vodka Shake well with ice and strain * 10 oz Triple sec mixture into 10 shot glasses. * 10 oz lime juice Salute! --------------------------------------------------- root@OpenWrt:/# passwd Changing password for root New password: Retype password: Password for root changed by root root@OpenWrt:/#
Please help us making this site better! Give feedback on the mailinglist (Openmoko as well as OpenWrt), change this site, file bug-reports or just tell us how much you love OpenWrt ;)