NetBSD

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Running NetBSD)
(Running NetBSD)
Line 150: Line 150:
 
root device:  
 
root device:  
 
</pre>
 
</pre>
 +
 +
Here's a [[:Image:Netbsd-evbarm-neo1973.png|screenshot]].
 +
  
 
This in comparance to  the [http://wiki.openmoko.org/wiki/Wishlist:Neo1973_P0_Review#System_information Linux dmesg]
 
This in comparance to  the [http://wiki.openmoko.org/wiki/Wishlist:Neo1973_P0_Review#System_information Linux dmesg]
  
 
Page thanks to and inspired by the [[FreeBSD]] page
 
Page thanks to and inspired by the [[FreeBSD]] page

Revision as of 20:26, 11 October 2007

Contents

Running NetBSD on Neo1973

The NetBSD/evbarm Neo1973 kernel is only ready for kernel developers.

Required tools

If you don't have a Neo1973, you will need a Qemu Neo1973 emulator, for instance the one running ontop NetBSD.

If you build the kernel yourself, you will need mkimage from u-boot.

Building NetBSD

You'll need to download some kernel files.


In [download-area]

pick Attachment: "NetBSD/evbarm 3.1 NEO1973 syssrc 20071010"

Save Link As... syssrc-neo1973-20071010.tar.gz


and extract it over the NetBSD src tree:

tar xfz syssrc-neo1973-20071010.tar.gz -C /
 

From the NetBSD src tree run:


cd /usr/src
./build.sh -m evbarm tools
./build.sh -u -m evbarm kernel=NEO1973
mkimage -A arm -O netbsd -T kernel -C none -a 30008000 -e 30008110 -n "Kernel Image" -d /usr/obj/sys/arch/evbarm/compile/NEO1973/netbsd  /usr/obj/sys/arch/evbarm/compile/NEO1973/netbsd.boot

You'll now have a copy of the NetBSD kernel, called netbsd.boot, that's able to be loaded by u-boot.

Prebuild NetBSD

You'll need to download a kernel.


In [download-area]

pick Attachment: "NetBSD/evbarm 3.1 NEO1973 kernel 20071010"

Save Link As... netbsd-NEO1973-20071010.gz


extract and move this kernel into place:

gzip -d netbsd-NEO1973-20071010.gz
mkdir -f /usr/obj/sys/arch/evbarm/compile/NEO1973
mv netbsd-NEO1973-2007101 /usr/obj/sys/arch/evbarm/compile/NEO1973/netbsd.boot
 

Running NetBSD

From the qemu directory edit openmoko/flash.sh and add the line:


kernel_image="/usr/obj/sys/arch/evbarm/compile/NEO1973/netbsd.boot"

after the four "most_recent" lines.

(if you do use wip/qemu-neo1973, the line is allready there..and you should only have to uncomment the line.)


Next run


./openmoko/download.sh
./openmoko/flash.sh

This will fetch the required parts and create an image to run. They require you to have bash installed.

Finally run qemu with


cd /usr/pkg/emul/neo1973; qemu-system-arm -M neo -m 130 -mtdblock openmoko/openmoko-flash.image -kernel openmoko/openmoko-kernel.bin -usb -show-cursor -serial telnet:localhost:1200,server

And from another xterm


telnet localhost 1200

and qemu will go on with the startup process.


In Qemu running u-boot,

press Space to select option "Boot".

In telnet to the serial port you should see:

host007# telnet localhost 1200
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.


U-Boot 1.2.0-moko9_r0 (Aug 19 2007 - 19:17:12)

DRAM:  128 MB
NAND:  64 MiB
Found Environment offset in OOB..
Video: 640x480x8 31kHz 59Hz

NAND read: device 0 offset 0x25c000, size 0x5000

Reading data from 0x260e00 -- 100% complete.
 20480 bytes read: OK
USB:   S3C2410 USB Deviced
In:    serial
Out:   serial
Err:   serial
GTA01Bv4 # Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.1 (NEO1973) #0: Tue Oct  9 23:08:38 CEST 2007
        noud4@host007.template:/usr/obj/sys/arch/evbarm/compile/NEO1973
total memory = 128 MB
avail memory = 119 MB
mainbus0 (root)
cpu0 at mainbus0: ARM920T rev 0 (ARM9TDMI core)
cpu0: DC enabled IC enabled WB enabled EABT
cpu0: 16KB/32B 64-way Instruction cache
cpu0: 16KB/32B 64-way write-back-locking-A Data cache
ssio0 at mainbus0: fclk 266 MHz hclk 133 MHz pclk 66 MHz
ohci0 at ssio0 intr 26
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Samsung OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
sscom0 at ssio0 unit 0: UART0 addr=50000000
sscom0: console (major=104)
sscom1 at ssio0 unit 1: UART1 addr=50004000
ssextio0 at ssio0
lcd0 at ssio0
wsdisplay0 at lcd0 kbdmux 1
wsmux1: connecting to wsdisplay0
ssspi0 at ssio0 unit 0
ssspi1 at ssio0 unit 1
sskbd0 at ssspi1 intr 1
wskbd0 at sskbd0 mux 1
wskbd0: connecting to wsdisplay0
clock: hz=100 stathz = 64 PCLK=66500000 prescaler=2 tc=32470
ubt0 at uhub0 port 3 configuration 1 interface 0
ubt0: Cambridge Silicon Radio Bluetooth USB Adapter, rev 2.00/19.58, addr 2
ubt0: has isoc data
bthci0 at ubt0
boot device: <unknown>
root device: 

Here's a screenshot.


This in comparance to the Linux dmesg

Page thanks to and inspired by the FreeBSD page

Personal tools

Running NetBSD on Neo1973

The NetBSD/evbarm Neo1973 kernel is only ready for kernel developers.

Required tools

If you don't have a Neo1973, you will need a Qemu Neo1973 emulator, for instance the one running ontop NetBSD.

If you build the kernel yourself, you will need mkimage from u-boot.

Building NetBSD

You'll need to download some kernel files.


In [download-area]

pick Attachment: "NetBSD/evbarm 3.1 NEO1973 syssrc 20071010"

Save Link As... syssrc-neo1973-20071010.tar.gz


and extract it over the NetBSD src tree:

tar xfz syssrc-neo1973-20071010.tar.gz -C /
 

From the NetBSD src tree run:


cd /usr/src
./build.sh -m evbarm tools
./build.sh -u -m evbarm kernel=NEO1973
mkimage -A arm -O netbsd -T kernel -C none -a 30008000 -e 30008110 -n "Kernel Image" -d /usr/obj/sys/arch/evbarm/compile/NEO1973/netbsd  /usr/obj/sys/arch/evbarm/compile/NEO1973/netbsd.boot

You'll now have a copy of the NetBSD kernel, called netbsd.boot, that's able to be loaded by u-boot.

Prebuild NetBSD

You'll need to download a kernel.


In [download-area]

pick Attachment: "NetBSD/evbarm 3.1 NEO1973 kernel 20071010"

Save Link As... netbsd-NEO1973-20071010.gz


extract and move this kernel into place:

gzip -d netbsd-NEO1973-20071010.gz
mkdir -f /usr/obj/sys/arch/evbarm/compile/NEO1973
mv netbsd-NEO1973-2007101 /usr/obj/sys/arch/evbarm/compile/NEO1973/netbsd.boot
 

Running NetBSD

From the qemu directory edit openmoko/flash.sh and add the line:


kernel_image="/usr/obj/sys/arch/evbarm/compile/NEO1973/netbsd.boot"

after the four "most_recent" lines.

(if you do use wip/qemu-neo1973, the line is allready there..and you should only have to uncomment the line.)


Next run


./openmoko/download.sh
./openmoko/flash.sh

This will fetch the required parts and create an image to run. They require you to have bash installed.

Finally run qemu with


cd /usr/pkg/emul/neo1973; qemu-system-arm -M neo -m 130 -mtdblock openmoko/openmoko-flash.image -kernel openmoko/openmoko-kernel.bin -usb -show-cursor -serial telnet:localhost:1200,server

And from another xterm


telnet localhost 1200

and qemu will go on with the startup process.


In Qemu running u-boot,

press Space to select option "Boot".

In telnet to the serial port you should see:

host007# telnet localhost 1200
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.


U-Boot 1.2.0-moko9_r0 (Aug 19 2007 - 19:17:12)

DRAM:  128 MB
NAND:  64 MiB
Found Environment offset in OOB..
Video: 640x480x8 31kHz 59Hz

NAND read: device 0 offset 0x25c000, size 0x5000

Reading data from 0x260e00 -- 100% complete.
 20480 bytes read: OK
USB:   S3C2410 USB Deviced
In:    serial
Out:   serial
Err:   serial
GTA01Bv4 # Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.1 (NEO1973) #0: Tue Oct  9 23:08:38 CEST 2007
        noud4@host007.template:/usr/obj/sys/arch/evbarm/compile/NEO1973
total memory = 128 MB
avail memory = 119 MB
mainbus0 (root)
cpu0 at mainbus0: ARM920T rev 0 (ARM9TDMI core)
cpu0: DC enabled IC enabled WB enabled EABT
cpu0: 16KB/32B 64-way Instruction cache
cpu0: 16KB/32B 64-way write-back-locking-A Data cache
ssio0 at mainbus0: fclk 266 MHz hclk 133 MHz pclk 66 MHz
ohci0 at ssio0 intr 26
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Samsung OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
sscom0 at ssio0 unit 0: UART0 addr=50000000
sscom0: console (major=104)
sscom1 at ssio0 unit 1: UART1 addr=50004000
ssextio0 at ssio0
lcd0 at ssio0
wsdisplay0 at lcd0 kbdmux 1
wsmux1: connecting to wsdisplay0
ssspi0 at ssio0 unit 0
ssspi1 at ssio0 unit 1
sskbd0 at ssspi1 intr 1
wskbd0 at sskbd0 mux 1
wskbd0: connecting to wsdisplay0
clock: hz=100 stathz = 64 PCLK=66500000 prescaler=2 tc=32470
ubt0 at uhub0 port 3 configuration 1 interface 0
ubt0: Cambridge Silicon Radio Bluetooth USB Adapter, rev 2.00/19.58, addr 2
ubt0: has isoc data
bthci0 at ubt0
boot device: <unknown>
root device: 

Here's a screenshot.


This in comparance to the Linux dmesg

Page thanks to and inspired by the FreeBSD page