Neo USB charger specifications and compatibility list
From Openmoko
CyrusDreams (Talk | contribs) (MDA charger added) |
(Adding link to charger detection in quickstart document) |
||
| Line 6: | Line 6: | ||
For Openmoko Neo, the value of the resistor is 47.5 kOhms. | For Openmoko Neo, the value of the resistor is 47.5 kOhms. | ||
| + | |||
| + | Additional details can be found at : http://quickstart.openmoko.org/#chargerdetection | ||
Following USB chargers have been identified and measured: | Following USB chargers have been identified and measured: | ||
Revision as of 21:45, 19 July 2008
 |
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
The Neo Freerunner and the Neo1973 can be charged with the supplied USB charger, which is a device that does not comply with the recent USB Battery Charging Specification. This specification demands for an open circuit on the ID pin and a short circuit between the D+ and D- pins.
Most of the USB chargers around behave the same way than the one supplied with the Openmoko Neo. In fact, up to now no charger has been identified to comply to the specification mentioned above. The differences (incompatibilities) result from the way the USB charger signals the mobile phone that it is present: most of the manufacturers chose to connect a resistor between the "ID" pin and the "GND" pin in the USB connector.
For Openmoko Neo, the value of the resistor is 47.5 kOhms.
Additional details can be found at : http://quickstart.openmoko.org/#chargerdetection
Following USB chargers have been identified and measured:
Contents |
AKII Technology Charger (supplied with Neo Freerunner)
This charger comes with the Neo Freerunner package.
Specifications
- Model: A10P1-05MP
- Input: 100-240V~ /0.3A
- Output: +5v up to 2.0A
- Signaling: 47.5k 1% resistor between ID pin and ground for openmoko charger identification
Compatibility
- HTC Polaris (tested on O2 Xda Orbit 2)
- Openmoko Neo1973
- Openmoko Neo Freerunner
Garmin 362-00043-04
This charger comes with the Garmin Edge bicycle computers.
Specifications
- Manufacturer: probably Phihong Technology Co., Ltd.
- Model: PSCR05R-050A1
- Input: 100-240V~ 0.2A 50-60Hz
- Output: 5V up to 1.0A
- Signaling: D+ and D- open, 17.4 kOhms resistor between ID pin and ground pin
Compatibility
- Garmin Edge
- HTC Polaris (tested on O2 Xda Orbit 2)
HTC 79H00051-02M
This charger comes with the tmobile MDA Compact 2 (HTC Charmer).
Specifications
- Manufacturer: Delta Electronics Inc.
- Model: ADP-5FH C
- Input: 100-240V~ 0.2A 50-60Hz
- Output: 5V= 1.0A LPS
- Signaling: D+ and D- open, short circuit between ID pin and ground pin
Compatibility
- HTC Charmer (tested on MDA Compact 2)
- Openmoko Neo Freerunner
HTC 79H00055-02M
This charger comes with the O2 Xda Orbit 2 (HTC Polaris).
Specifications
- Manufacturer: Phihong Technology Co., Ltd.
- Model: PSAA05E-050 (the letter E denotes the EU power connector. There are also US, UK and AUS variants of this model)
- Input: 100-240V~ 0.3A
- Output: 5.15V up to 1.0A (over-current protection at 2A)
- Signaling: D+ and D- open, short circuit between ID pin and ground pin
Compatibility
- HTC Polaris (tested on O2 Xda Orbit 2)
- Garmin Edge
PHIHONG CLM10D-050
This 12V cigarette lighter adapter charger comes with the O2 Xda Orbit 2 (HTC Polaris).
Specifications
- Manufacturer: Phihong Technology Co., Ltd.
- Model: CLM10D-050
- Input: 10-30V DC
- Output: 5.0V up to 2.0A
- Signaling: D+ and D- open, short circuit between ID pin and ground pin
Compatibility
- HTC Polaris (tested on O2 Xda Orbit 2)
- Garmin Edge
