View source for Neo FreeRunner Wifi

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Template used on this page:

Return to Neo FreeRunner Wifi.

Personal tools

To get wlan working on your Freerunner, you can follow these steps:

1. create and edit a suitable /etc/wpa_supplicant/wpa_supplicant.conf (use your favourite search engine to find the syntax)

2. execute `ifup eth0`

3. execute `wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf -B` (-B for running as daemon)

4. get a IP via dhcp: `udhcpc eth0`

That's it, your wlan should now work!

Known good wpa-supplicant version?

Is the 0.6.3-r1 broken? I don't get anything to work with these instructions via usage of wpa_supplicant, but WEP works via direct interfaces changes (wireless-essid/wireless-key settings).

Sample wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1

# WPA2:
network={
       ssid="your ssid"
       scan_ssid=1
       proto=RSN
       key_mgmt=WPA-PSK
       pairwise=CCMP TKIP
       group=TKIP CCMP
       psk="secret key"
       priority=50
}

# WPA:
network={
      ssid="your_ssid"
      scan_ssid=1
      psk="secret key"
      priority=10
}

# WEP:
network={
     ssid="your_ssid"
     scan_ssid=1
     key_mgmt=NONE
     wep_tx_keyidx=0
     wep_key0="secret key"
     priority=8
}

# Open:
network={
     ssid="your ssid"
     key_mgmt=NONE
     priority=5
}

A very ugly /etc/init.d/wlan startscript

#!/bin/sh
#
# wlan	This shell script starts and stops wlan.
#
# processname: wlan

# Source function library.
#. /etc/rc.d/init.d/functions
# "written" by HdR

RETVAL=0
prog="wlan"

# test -f /etc/default/$prog && . /etc/default/$prog

start() {
	echo -n "Starting $prog: "
	ifconfig eth0 up
	wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf -B
	sleep 10
	udhcpc eth0
	RETVAL=$?
	return $RETVAL
}

stop() {
	# Stop daemons.
	echo -n "Shutting down $prog: "
        killall wpa_supplicant
	ifconfig eth0 down
#        killproc gpsd
	RETVAL=$?
	return $RETVAL
}

# See how we were called.
case "$1" in
  start)
	start
	;;
  stop)
	stop
	;;
  restart|reload)
	stop
	start
	RETVAL=$?
	;;
  *)
	echo "Usage: $0 {start|stop|restart}"
	exit 1
esac

exit $RETVAL

An alternative way to automate

Add the wpa_supplicant details to /etc/network/interfaces:

iface eth0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

Now `ifup eth0` will start up wpa_supplicant and udhcpc for you, and `ifdown eth0` will stop them, in theory at least. In practise udhcpc can time out before wpa_supplicant has finished connecting to the access point, and if udhcpc has failed to get an address ifdown exits without stopping wpa_supplicant and bringing down the interface.

Comments

The alternative method seems to work reliably on the FR/ GTA02, I couldn't get the manual method to work when WPA/PSK is involved. Also you must do ifdown usb0 before the ifup eth0. Then you also need to setup the resolv.conf manually as it does not seem to get the dns server from the dhcp server. If the dhcp fails during ifup eth0, then you can run udhcpc eth0 manually it usually gets the dhcp address the second time around.

I use a script called u...

  1. u

ifdown usb0 ifup eth0 echo nameserver xx.xx.xx.xx >/etc/resolv.conf

This usually works