View source for Neo FreeRunner GPS

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Return to Neo FreeRunner GPS.

Personal tools
Key pages on:
Neo FreeRunner

Basic Setup

For basic setup instructions, check the GPS getting started instructions.

Note that there is a known issue between the GPS and SD card slot which is discussed here.


  • Shell test script for raw data dump:
echo 0 > /sys/class/i2c-adapter/i2c-0/0-0073/neo1973-pm-gps.0/pwron && 
sleep 1s && echo 1 > /sys/class/i2c-adapter/i2c-0/0-0073/neo1973-pm-gps.0/pwron && stty -F /dev/ttySAC1 -echo && cat -u /dev/ttySAC1 | grep -v ^$

Low level access

There is no userland driver required for the GTA02, the driver is built into the kernel.

To turn on the GPS, echo 1 to the sys file:

echo 1 > /sys/devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/neo1973-pm-gps.0/pwron

To read from the GPS, simply read /dev/ttySAC1. Use the gpspipe command like this:

gpspipe -r 2947

You will find gpspipe in the package gps-utils. You can also just "cat /dev/ttySAC1" but it produces the unknown msg*58; This doesn't happen with gpspipe.

Before getting a fix, the GPS spits out lots of "$GPTXT,01,01,01,NMEA unknown msg*58", though these stop once a fix is obtained.

A position without a fix looks like this:


One with a fix:

$GPGGA,065852.00,5613.022527,N,00306.725890,W,1,05,0.5,158.0,M,0.277000,M,-0.010 0515,*7A

(The given position is in central Scotland.)

--Speedevil 11:52, 7 April 2008 (CEST)

If you are having GPS problems with your Freerunner, please document them on the page GPS Problems. FreeRunner GPS antenna repair SOP documents a possible solution.

In Openmoko projects, there is a GPS test program called agpsui that provides graphical and text dump of GPS information. See Howto Test Your GPS with agpsui. The project is called Openmoko AGPS UI project.

Using GPS

Aside from accessing the GPS data in applications programs running directly on the smartphone, you can also access the GPS data stream from another gadget such as a laptop.

Here are a couple ways to do that. You can use a network connection to pull data from the gpsd daemon, or you can make the smartphone appear to be a generic Bluetooth-connected GPS receiver.

Using gpsd requires a program that understands its protocol, such as GPSdrive. Using Bluetooth would allow using just about any program that understands the NMEA protocol.

Using gpsd with a network connection

This procedure depends upon being able to set up a network connection between your Neo and your laptop. The connection can be over either WiFi or USB cable.

First be sure you have gpsd installed. Some Neo Freerunner images don't have gpsd, they use a different GPS stack called gypsy.

  1. On host type: nc -vvn -l -p 5000 > /tmp/nmeaNP (Host starts listening on port 5000 for GPS-signals and sends them to /tmp/nmeaNP)
  2. On the Neo type: nc 5000 < /dev/ttySAC1 (Signals from device will be send to port 5000 on host.) If your host is connected to the neo via wifi, change the IP address in the command to the one of the host.
  3. On the host PC install GPSD, your GPS is attached as /tmp/nmeaNP
  4. start gpsd on host with: gpsd -p /tmp/nmeaNP
  5. run your application! I used gpsdrive and it works better than my stand-alone GPS.

Tested with RoadNav. Works great!

Another way is to forward gpsd on the neo. If '' is your neo, then run "ssh -L 2947:localhost:2947 root@" on the host.

Tested and works with roadnav, gpsdrive, and tangogps on the host computer. Sargas 21:52, 16 August 2008 (UTC)

If you have an unlimited GPRS data package you could make your gpsd service accessible over the Internet. This opens up many possibilities. For example, you could implemented AVL (Automatic Vehicle Location) by having a web server somewhere query your gpsd server for your position and write it to a KML file which would then display your location on a Google map.

Bluetooth GPS relay

Here is how to make your smartphone appear to be a Bluetooth GPS.

  1. Power up the bluetooth radio
  2. Ensure gpsd is running and the gps-utils package is installed
  3. Run sdptool add SP
  4. Run rfcomm -r watch 0 1 sh -c "gpspipe -r >/dev/rfcomm0" &

GTA02 GPS Hardware Assist Feature

GTA02 is using the u-blox ANTARIS 4 ATR0635 hardware and could use u-blox AssistNow Online GPS (A-GPS) servces. GTA02 hardware design does not comply with official Assist Offline service requirement.

Assist Online/Offline comparsion

The "A"GPS support could cut TTFF time from 40 secs to 10-20 seconds. And the valid time of assist now download is about 4 hours. You could also check the following address:

Due to the u-blox ANTARIS 4 ATR0635 need to have extra flash to storage up to 14 days of offline data (90 KBytes).

Assist Online

Each download package could have up to 4 hours vaild data to assist TTFF. For u-blox Assist Online, you have to provide approximate longitude/latitude and time to get the corresponds "almanac" and "ephemeris" package. This might be base on application design for how to provide the longitude/latitude. User could select the location area from list menu or world map, or better implementation using the GSM/wi-fi location technique/service.

u-blox Assist Online implementation

For GTA02 default shipment image, there is no A-GPS/GPS supported software inside. You could find the u-blox A-GPS online implementation document here:

And implementation code in following address.

Here is a brief script to run this application:


echo 1 >/sys/bus/platform/drivers/neo1973-pm-gps/neo1973-pm-gps.0/pwron

./agps-onlinec -c full -u youraccount -k yourpasswd -la 25.073270 -lo
121.574805 -p 999999.00 

cat /dev/ttySAC1

-la 25.073270 -lo 121.574805 is reference latitude/longtitude

Here is a simple perl skript doing the same:

#!/usr/bin/perl -wT
# ublox AssistNow Online almanach downloader for Neo Freerunner
# v0.1
# Wilfried Klaebe <>
# Usage:
# > /dev/ttySAC1

use strict;
use IO::Socket::INET;
use vars qw(%h);

my $user = 'user@somewhere.invalid';
my $pass = 'pass-from-ublox';

my $s = new IO::Socket::INET(PeerAddr => '', Proto => 'tcp', PeerPort => 46434);

$s->print('user='.$user.';pwd='.$pass.';cmd=alm;lat=0;lon=0;pacc=40000000;', "\n");

print STDERR $s->getline;

while(my $l = $s->getline) {
        print STDERR $l;

        $l =~ s/(\r\n|\n)+\Z//g;

        if ($l eq "") {
                if ($h{'content-length'} > 0 && $h{'content-type'} eq 'application/ubx') {
                        print $l;

        if ($l =~ m/\A(.+): (.+)\Z/) {
                $h{lc($1)} = lc($2);

This also works with cmd=full and meaningful lat/lon/pacc values.

Same in python:

# ublox AssistNow Online almanach downloader for Neo Freerunner
# v0.1
# Wilfried Klaebe <>
# Usage:
# > /dev/ttySAC1

import sys
import socket
import re


s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)


buf = s.recv(4096)
while 1:
        b = s.recv(4096)
        if not b:
        buf += b

h = {}

while 1:
        (l,s,buf) = buf.partition('\n')
        l = l.rstrip('\r\n')
        if (l == ""):
                if h.has_key('content-length') and h['content-length'].isdigit() and h.has_key('content-type') and h['content-type'] == 'application/ubx':
        m ='\\A(.+): (.+)\\Z',l)
        if m:
                h[] =;

u-blox Assist Now account application

And account application is send a mail to

without content and title. And not all mail account are accepted/could get reply. since the protocol is pretty straight forward, implement an extra proxy to scale up user should be easy.

Assist Offline

u-blox Assist Offline service could provide up to 14 days of valid assist GPS data in single download package. But Assist Offline service need an extra flash to storage Almanac data, and u-blox ANTARIS 4 ATR0635 will automatically use these data while system start up. GTA02 don't support Assist Offline.

u-blox Assist Offline implementation

Due to the u-blox 4 need to have extra flash to storage up to 14 days of offline data (90 KBytes), GTA02 don't have it. I would very interested if there is another way to twist it around, but not likely, so far. Offline sample data you could find in the following addesss:

And u-blox did provided source code of Assist offline server implementation and ubx header, you could find it here:

Possible implementation mechanism

We can use the same protocol as the online assist to provide the time, last location, almanac and ephemeris data that would be held in the extra flash storage when we power up the GPS. Time is available from the local clock, and we can save location, almanac and ephemeris when the GPS is shut down. We may be able to have a better guess at startup location based on GSM cell ID, WiFi access points, or by the user selecting an area on a map.

Some Ruby tools already exist for downloading and uploading Almanac and Ephemeris. See

UBX protocol

Protocol specification (html-help format):

Sample header could be found here: ubx.h

Conversion between lat/ln and ECEF xyz coordinates:

Packet generator:

# ubx packet generator
# v0.1
# Wilfried Klaebe <>
# Usage:
# 06 13 04 00 01 00 00 00 > packet.ubx
# prepends 0xb5 0x62 header,
# appends checksum,
# outputs binary packet to stdout
# you can send the packet to GPS chip like this:
# cat packet.ubx > /dev/ttySAC1

import sys
import binascii



for d in sys.argv[1:]:
	c = binascii.unhexlify(d)
	cs0 += ord(c)
	cs0 &= 255
	cs1 += cs0
	cs1 &= 255


Template:GPS applications