Neo 1973 OpenOCD

From Openmoko

(Difference between revisions)
Jump to: navigation, search
 
Line 17: Line 17:
  
 
[[User:HaraldWelte]] has provided a [http://people.gta01.hmw-consulting.de/laforge/misc/openocd.cfg openocd.cfg configuration file] for use of OpenOCD with wiggler and the QT2410 target board.  
 
[[User:HaraldWelte]] has provided a [http://people.gta01.hmw-consulting.de/laforge/misc/openocd.cfg openocd.cfg configuration file] for use of OpenOCD with wiggler and the QT2410 target board.  
 
== Usage ==
 
 
Ju
 
 
  
 
== Known Bugs ==
 
== Known Bugs ==

Revision as of 14:56, 10 August 2006

OpenOCD is a 100% free software On-chip-debugger for commonly-found ARM JTAG probes such as wiggler, chamaeleon, jtag-key and others.

It provides a human-readable telnet interface for manually halting/resuming the target device, reading/writing registers and memory, etc.

In addition, it provides a RDI (remote debugger interface) on a TCP port. This interface can be used by gdb (the GNU Debugger).

The GTA01 development team uses OpenOCD with a wiggler compatible probe as their ICE solution.


Getting OpenOCD

OpenOCD Revision 82 has been proven to work with our QT2410 target board and wiggler. You can check rev. 82 out of the OpenOCD subversion via

svn co -r 82 http://svn.berlios.de/svnroot/repos/openocd/trunk

Configuration

User:HaraldWelte has provided a openocd.cfg configuration file for use of OpenOCD with wiggler and the QT2410 target board.

Known Bugs

  • CP15 register read/write of ARM920T core not working

This has been reported upstream. Bugfix pending.

Personal tools

OpenOCD is a 100% free software On-chip-debugger for commonly-found ARM JTAG probes such as wiggler, chamaeleon, jtag-key and others.

It provides a human-readable telnet interface for manually halting/resuming the target device, reading/writing registers and memory, etc.

In addition, it provides a RDI (remote debugger interface) on a TCP port. This interface can be used by gdb (the GNU Debugger).

The GTA01 development team uses OpenOCD with a wiggler compatible probe as their ICE solution.


Getting OpenOCD

OpenOCD Revision 82 has been proven to work with our QT2410 target board and wiggler. You can check rev. 82 out of the OpenOCD subversion via

svn co -r 82 http://svn.berlios.de/svnroot/repos/openocd/trunk

Configuration

User:HaraldWelte has provided a openocd.cfg configuration file for use of OpenOCD with wiggler and the QT2410 target board.

Usage

Ju


Known Bugs

  • CP15 register read/write of ARM920T core not working

This has been reported upstream. Bugfix pending.