Neo 1973/nl

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m
m (Replacing 'OpenMoko' with 'Openmoko')
Line 1: Line 1:
 
[[Image:FIC-neo1973 small.jpg|120px|right]]
 
[[Image:FIC-neo1973 small.jpg|120px|right]]
De [[Neo1973 Hardware | Neo1973]] is de eerste telefoon die speciaal ontworpen is om [[OpenMoko]] te draaien.
+
De [[Neo1973 Hardware | Neo1973]] is de eerste telefoon die speciaal ontworpen is om [[Openmoko]] te draaien.
 
De telefoon, die geproduceerd wordt door [[FIC]], kan gebruikt worden in combinatie met elke [[GSM]] provider.  
 
De telefoon, die geproduceerd wordt door [[FIC]], kan gebruikt worden in combinatie met elke [[GSM]] provider.  
  
Line 8: Line 8:
 
[[Neo1973 Hardware | Neo1973 Hardware]] en [[Disassembling Neo1973]] bevatten informatie over de hardware.
 
[[Neo1973 Hardware | Neo1973 Hardware]] en [[Disassembling Neo1973]] bevatten informatie over de hardware.
  
Zie [[OpenMoko]], [[OpenmokoFramework]], [[MokoMakefile]] en [[Development resources]] voor meer informatie over de (vrije) broncode.
+
Zie [[Openmoko]], [[OpenmokoFramework]], [[MokoMakefile]] en [[Development resources]] voor meer informatie over de (vrije) broncode.
  
 
Zie [[FAQ]] voor overige veel gestelde vragen (Frequently Asked Questions).
 
Zie [[FAQ]] voor overige veel gestelde vragen (Frequently Asked Questions).
Line 70: Line 70:
 
* GTA02v3 power supply flaw found, GTA02v4 needed - DONE
 
* GTA02v3 power supply flaw found, GTA02v4 needed - DONE
 
* GTA02v4 design finalized - DONE
 
* GTA02v4 design finalized - DONE
* GTA02v4 small number produced for OpenMoko internal developer evaluation - DONE
+
* GTA02v4 small number produced for Openmoko internal developer evaluation - DONE
* GTA02v4 thorough evaluation by OpenMoko internal developers - DONE?
+
* GTA02v4 thorough evaluation by Openmoko internal developers - DONE?
 
* GTA02v4 flaw found, GTA02v5 needed - DONE?
 
* GTA02v4 flaw found, GTA02v5 needed - DONE?
 
* GTA02v5 design finalized - DONE?
 
* GTA02v5 design finalized - DONE?
* GTA02v5 small number produced for OpenMoko internal developer evaluation
+
* GTA02v5 small number produced for Openmoko internal developer evaluation
* GTA02v5 thorough evaluation by OpenMoko internal developers
+
* GTA02v5 thorough evaluation by Openmoko internal developers
 
* GTA02v5 produced in moderate volume
 
* GTA02v5 produced in moderate volume
 
* GTA02v5 goes on sale to community via web store
 
* GTA02v5 goes on sale to community via web store

Revision as of 00:14, 23 August 2008

FIC-neo1973 small.jpg

De Neo1973 is de eerste telefoon die speciaal ontworpen is om Openmoko te draaien. De telefoon, die geproduceerd wordt door FIC, kan gebruikt worden in combinatie met elke GSM provider.

Uw Neo1973 net binnen? Kijk op de pagina: aan de slag.


Neo1973 Hardware en Disassembling Neo1973 bevatten informatie over de hardware.

Zie Openmoko, OpenmokoFramework, MokoMakefile en Development resources voor meer informatie over de (vrije) broncode.

Zie FAQ voor overige veel gestelde vragen (Frequently Asked Questions).

Hier vindt u een SVG ClipArt met enkele illustratieve voorbeelden.

Contents

Phase 0 (GTA01Bv3)

Main article Neo1973 Phase 0
See also Wishlist:Neo1973_P0_Review

36 developers have received their devices. [1]

Phase 1 (GTA01Bv4)

Main article Neo1973 Phase 1

You can order from https://direct.openmoko.com/ now. See also the Group Order page.

The Neo Base costs $300, the Neo Advanced costs $450.

See Neo1973 Hardware for what components GTA01B_v04 contains.

Neo Base -- everything the mobile application developer needs to enjoy the benefits of the first freed phone, the Neo1973:

* Neo1973 (GTA01B_v4)
* Battery (1200mAh)
* Stylus
* Headset
* Phone Pouch
* Lanyard
* SanDisk 512MB MicroSD Card
* Mini USB Connectivity Cable

Neo Advanced -- everything the mobile device hacker wants to get down and dirty with the first freed phone, the Neo1973:

* Neo1973 (GTA01B_v4)
* Battery (1200mAh) (2x)
* Stylus
* Headset
* Phone Pouch
* Lanyard
* SanDisk 512MB MicroSD Card (2x)
* Mini USB Connectivity Cable (2x)
* Debug Flex Cable
* Debug Board v2 (JTAG and serial console)
* Ruggedized Toolbox with shoulder strap
* Guitar Pick (for opening case)
* Torx T6 screwdriver

You do not need the Advanced package to do normal kernel, or application development, only perhaps hacking on u-boot.

As described in Sean's post on mailing list (with some adjustments/corrections).

"Phase 2" (GTA02, "Mass Market")

The device will hopefully go on sale for developers in December, with mass-market to follow when the software is ready. (Seemingly confirmed at OpenExpo, see Talk page)

See Neo1973 GTA02 Hardware for the components in the GTA02v4 revision of the hardware.

Estimated time line

  • GTA02v3 design finalized - DONE
  • GTA02v3 power supply flaw found, GTA02v4 needed - DONE
  • GTA02v4 design finalized - DONE
  • GTA02v4 small number produced for Openmoko internal developer evaluation - DONE
  • GTA02v4 thorough evaluation by Openmoko internal developers - DONE?
  • GTA02v4 flaw found, GTA02v5 needed - DONE?
  • GTA02v5 design finalized - DONE?
  • GTA02v5 small number produced for Openmoko internal developer evaluation
  • GTA02v5 thorough evaluation by Openmoko internal developers
  • GTA02v5 produced in moderate volume
  • GTA02v5 goes on sale to community via web store

(Note regarding above: per the IRC and comments on bug 957, there is to be a fifth revision of the GTA02 hardware, so I suspect the timeline is pushed out a bit again.)

(For the very latest news, visit Community Updates, which also allows you to suggest questions or topics for future updates.)

It will have the following new hardware components:[2]

* 802.11 b/g WiFi
* Samsung S3C2442 SoC
* SMedia Glamo3362 Graphics Accelerator
* 2 3D Accelerometers
* 256MB Flash
* 1700mAh Battery
* Faster CPU - S3C2442 at 400MHz
* LEDs illuminating the two buttons. 

It will also lose:

* One speaker, becoming mono. 

We will sell this device through multiple channels. Direct from openmoko.com, the price will be $450 for the Neo Base and $600 for Neo Advanced.

Adds to the Phase 1 phone (see side by side comparison):

  • 2D/3D-Graphics-Accelerator
  • 2 Accelerometers (model and number is uncertain)
  • Faster CPU - S3C2442/400
  • WiFi: Atheros AR6K (see also [3])
    • Above from [4] and other sources
  • 100mA powered USB host
  • There will be no changes in the external housing, but internal plastics change. [5] [6]

Personal tools
FIC-neo1973 small.jpg

De Neo1973 is de eerste telefoon die speciaal ontworpen is om OpenMoko te draaien. De telefoon, die geproduceerd wordt door FIC, kan gebruikt worden in combinatie met elke GSM provider.

Uw Neo1973 net binnen? Kijk op de pagina: aan de slag.


Neo1973 Hardware en Disassembling Neo1973 bevatten informatie over de hardware.

Zie OpenMoko, OpenmokoFramework, MokoMakefile en Development resources voor meer informatie over de (vrije) broncode.

Zie FAQ voor overige veel gestelde vragen (Frequently Asked Questions).

Hier vindt u een SVG ClipArt met enkele illustratieve voorbeelden.

Phase 0 (GTA01Bv3)

Main article Neo1973 Phase 0
See also Wishlist:Neo1973_P0_Review

36 developers have received their devices. [1]

Phase 1 (GTA01Bv4)

Main article Neo1973 Phase 1

You can order from https://direct.openmoko.com/ now. See also the Group Order page.

The Neo Base costs $300, the Neo Advanced costs $450.

See Neo1973 Hardware for what components GTA01B_v04 contains.

Neo Base -- everything the mobile application developer needs to enjoy the benefits of the first freed phone, the Neo1973:

* Neo1973 (GTA01B_v4)
* Battery (1200mAh)
* Stylus
* Headset
* Phone Pouch
* Lanyard
* SanDisk 512MB MicroSD Card
* Mini USB Connectivity Cable

Neo Advanced -- everything the mobile device hacker wants to get down and dirty with the first freed phone, the Neo1973:

* Neo1973 (GTA01B_v4)
* Battery (1200mAh) (2x)
* Stylus
* Headset
* Phone Pouch
* Lanyard
* SanDisk 512MB MicroSD Card (2x)
* Mini USB Connectivity Cable (2x)
* Debug Flex Cable
* Debug Board v2 (JTAG and serial console)
* Ruggedized Toolbox with shoulder strap
* Guitar Pick (for opening case)
* Torx T6 screwdriver

You do not need the Advanced package to do normal kernel, or application development, only perhaps hacking on u-boot.

As described in Sean's post on mailing list (with some adjustments/corrections).

"Phase 2" (GTA02, "Mass Market")

The device will hopefully go on sale for developers in December, with mass-market to follow when the software is ready. (Seemingly confirmed at OpenExpo, see Talk page)

See Neo1973 GTA02 Hardware for the components in the GTA02v4 revision of the hardware.

Estimated time line

  • GTA02v3 design finalized - DONE
  • GTA02v3 power supply flaw found, GTA02v4 needed - DONE
  • GTA02v4 design finalized - DONE
  • GTA02v4 small number produced for OpenMoko internal developer evaluation - DONE
  • GTA02v4 thorough evaluation by OpenMoko internal developers - DONE?
  • GTA02v4 flaw found, GTA02v5 needed - DONE?
  • GTA02v5 design finalized - DONE?
  • GTA02v5 small number produced for OpenMoko internal developer evaluation
  • GTA02v5 thorough evaluation by OpenMoko internal developers
  • GTA02v5 produced in moderate volume
  • GTA02v5 goes on sale to community via web store

(Note regarding above: per the IRC and comments on bug 957, there is to be a fifth revision of the GTA02 hardware, so I suspect the timeline is pushed out a bit again.)

(For the very latest news, visit Community Updates, which also allows you to suggest questions or topics for future updates.)

It will have the following new hardware components:[2]

* 802.11 b/g WiFi
* Samsung S3C2442 SoC
* SMedia Glamo3362 Graphics Accelerator
* 2 3D Accelerometers
* 256MB Flash
* 1700mAh Battery
* Faster CPU - S3C2442 at 400MHz
* LEDs illuminating the two buttons. 

It will also lose:

* One speaker, becoming mono. 

We will sell this device through multiple channels. Direct from openmoko.com, the price will be $450 for the Neo Base and $600 for Neo Advanced.

Adds to the Phase 1 phone (see side by side comparison):

  • 2D/3D-Graphics-Accelerator
  • 2 Accelerometers (model and number is uncertain)
  • Faster CPU - S3C2442/400
  • WiFi: Atheros AR6K (see also [3])
    • Above from [4] and other sources
  • 100mA powered USB host
  • There will be no changes in the external housing, but internal plastics change. [5] [6]