Nand erase

From Openmoko

Revision as of 08:37, 15 August 2007 by Hhf423 (Talk | contribs)

Jump to: navigation, search

To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0.

cu -l /dev/ttyACM0

After connecting, you should get a prompt, where you can write:

  1. nand erase clean rootfs
  2. nand erase clean kernel
Personal tools

To make a NAND erase, you need to connect to your device while in uboot using minicom or cu. The device will usually be called /dev/ttyACM0.

cu -l /dev/ttyACM0

After connecting, you should get a prompt, where you can write:

  1. nand erase clean rootfs
  2. nand erase clean kernel