Modular phone

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (removed info about upcoming lcd)
m (Category changes: -User, -Ideas)
 
(12 intermediate revisions by 3 users not shown)
Line 1: Line 1:
A number of manufacturers produce modular components suitable for embedded systems. Some of these components are suitable for a hobbyist to put together a modular phone. This page is intended as a starting-point for building an OpenMoko compatible phone.
+
{{Hardware Wishlist}}
 +
 
 +
A number of manufacturers produce modular components designed for embedded systems. Some of these components are suitable for a hobbyist to put together a modular phone. This page is intended as a starting-point for building an Openmoko compatible phone.
  
 
The major problem with this approach is that the resultant phone tends to be larger than a normal phone.
 
The major problem with this approach is that the resultant phone tends to be larger than a normal phone.
Line 11: Line 13:
 
*[http://www.jandrew-elec.com/acatalog/Siemens_GSM_GPRS_EDGE_Modules.html GSM/HDSPA/UMTS modules]
 
*[http://www.jandrew-elec.com/acatalog/Siemens_GSM_GPRS_EDGE_Modules.html GSM/HDSPA/UMTS modules]
  
==Possible configuration 1==
+
==Possible configuration 1, based upon modules from gumstix.com==
 
{| border=1
 
{| border=1
 
! Component !! Provides !! Link !! Cost (USD) !! Weight (g)
 
! Component !! Provides !! Link !! Cost (USD) !! Weight (g)
Line 17: Line 19:
 
|Gumstix Verdex XL6P || Processor, motherboard, RAM, 64MB flash || gumstix.com || 169 || 8
 
|Gumstix Verdex XL6P || Processor, motherboard, RAM, 64MB flash || gumstix.com || 169 || 8
 
|-
 
|-
|Goliath-GPS-vx || GSM, GPRS, EDGE, GPS, touchscreen controller, 3D accelerometer, audio, battery charger || gumstix.com || 279 || ?
+
|Siemens XT75 || GSM, GPRS, EDGE, GPS || jandrew-elec.com || 150 || 10
 
|-
 
|-
 
|USB WiFi dongle || WiFi ||  || 15 || ?
 
|USB WiFi dongle || WiFi ||  || 15 || ?
Line 23: Line 25:
 
|microSD breakout board || microSD connector || [http://www.sparkfun.com/commerce/product_info.php?products_id=544] || 15 || 5
 
|microSD breakout board || microSD connector || [http://www.sparkfun.com/commerce/product_info.php?products_id=544] || 15 || 5
 
|-
 
|-
| PSP LCD || 480 x 272px LCD || [http://www.sparkfun.com/commerce/product_info.php?products_id=8335] || 69 || 50
+
| Dell Axim x50v Screen || 480 x 640px LCD || ebay.com, various sources || ~50 || 50
[http://document.sharpsma.com/files/LQ043T3DX02_SP_122805.pdf]
+
|-
 +
|LCD controller || xx || ? || ? || ?
 
|-
 
|-
 
|Nokia BL-6C || 1070mAh battery  || ebay.com || 5 || 15g [http://www.cellpower.com/battery.cfm/Model/6016i,%206015i/PartNumber/N60-11Lo.html]
 
|Nokia BL-6C || 1070mAh battery  || ebay.com || 5 || 15g [http://www.cellpower.com/battery.cfm/Model/6016i,%206015i/PartNumber/N60-11Lo.html]
 
|-
 
|-
|Case || 12*7*.2cm(back)+26*2.5*.2cm(edge) +3.5*12*.2 =37cc || rapidobject.com (based on recommended minimum thickness) || 98 || 90-140
+
|Case || 12*7*.2cm(back)+26*2.5*.2cm(edge) +3.5*12*.2 =37cc || rapidobject.com (based on recommended minimum thickness) || 98 || 75-90
 
|-
 
|-
 
|Speakers || .2W per channel of stereo sound || [http://rocky.digikey.com/scripts/ProductInfo.dll?Site=US&V=10&M=EAS-2P113D] || 5 || 16
 
|Speakers || .2W per channel of stereo sound || [http://rocky.digikey.com/scripts/ProductInfo.dll?Site=US&V=10&M=EAS-2P113D] || 5 || 16
Line 36: Line 39:
 
|Audio amplifier || xx || xx || 10 || ?
 
|Audio amplifier || xx || xx || 10 || ?
 
|-
 
|-
|Total || xx || xx || 665 || 180
+
|Total || xx || xx || 520 || 180
 
|-
 
|-
  
 
|}
 
|}
  
Prices will be reduced, if we as the OpenMoko community buy in bulk.
+
Prices will be reduced, if we as the Openmoko community buy in bulk.
  
 
Capabilities wise, this compares well with the Neo - there is no accelerated graphics and the screen resolution is smaller, but it does have EDGE and a faster processor. Otherwise specs are similar.
 
Capabilities wise, this compares well with the Neo - there is no accelerated graphics and the screen resolution is smaller, but it does have EDGE and a faster processor. Otherwise specs are similar.
Line 53: Line 56:
 
==Other resources==
 
==Other resources==
 
[http://hbmobile.org Home Brew Mobile Phone Club] have a site devoted to build-it-yourself mobile phones, based upon Gumstix motherboards. They have schematics, case designs and details of suitable components from many sources.
 
[http://hbmobile.org Home Brew Mobile Phone Club] have a site devoted to build-it-yourself mobile phones, based upon Gumstix motherboards. They have schematics, case designs and details of suitable components from many sources.
 
[[Category:Hardware ideas]]
 

Latest revision as of 23:29, 30 August 2008

Hardware wishes warning! This article or section documents a Hardware Wish List item, the features described here may or may not be implemented in future devices.

A number of manufacturers produce modular components designed for embedded systems. Some of these components are suitable for a hobbyist to put together a modular phone. This page is intended as a starting-point for building an Openmoko compatible phone.

The major problem with this approach is that the resultant phone tends to be larger than a normal phone.

This is because though they may be designed to be compact, internal connectors add lots of volume compared to a PCB, where everything can be in one unit.

[edit] Component Suppliers

[edit] Possible configuration 1, based upon modules from gumstix.com

Component Provides Link Cost (USD) Weight (g)
Gumstix Verdex XL6P Processor, motherboard, RAM, 64MB flash gumstix.com 169 8
Siemens XT75 GSM, GPRS, EDGE, GPS jandrew-elec.com 150 10
USB WiFi dongle WiFi 15  ?
microSD breakout board microSD connector [1] 15 5
Dell Axim x50v Screen 480 x 640px LCD ebay.com, various sources ~50 50
LCD controller xx  ?  ?  ?
Nokia BL-6C 1070mAh battery ebay.com 5 15g [2]
Case 12*7*.2cm(back)+26*2.5*.2cm(edge) +3.5*12*.2 =37cc rapidobject.com (based on recommended minimum thickness) 98 75-90
Speakers .2W per channel of stereo sound [3] 5 16
Microphone Microphone and mic amp [4] 5 1
Audio amplifier xx xx 10  ?
Total xx xx 520 180

Prices will be reduced, if we as the Openmoko community buy in bulk.

Capabilities wise, this compares well with the Neo - there is no accelerated graphics and the screen resolution is smaller, but it does have EDGE and a faster processor. Otherwise specs are similar.

From Sketchup models supplied by Gumstix, the size will be around 120 x 67 x 20mm. This is the smallest cuboid into which the main components (motherboard, WiFi, Goliath, screen) will fit. The case will add approx. 2mm to this - battery, microSD and other components should fit into voids between the main circuit boards.

Weight information will be included here as soon as the specs are released by Gumstix.

Where relevant, all components listed have Linux kernel modules supplied by their manufacturer.

[edit] Other resources

Home Brew Mobile Phone Club have a site devoted to build-it-yourself mobile phones, based upon Gumstix motherboards. They have schematics, case designs and details of suitable components from many sources.

Personal tools

A number of manufacturers produce modular components suitable for embedded systems. Some of these components are suitable for a hobbyist to put together a modular phone. This page is intended as a starting-point for building an OpenMoko compatible phone.

The major problem with this approach is that the resultant phone tends to be larger than a normal phone.

This is because though they may be designed to be compact, internal connectors add lots of volume compared to a PCB, where everything can be in one unit.

Component Suppliers

Possible configuration 1

Component Provides Link Cost (USD) Weight (g)
Gumstix Verdex XL6P Processor, motherboard, RAM, 64MB flash gumstix.com 169 8
Goliath-GPS-vx GSM, GPRS, EDGE, GPS, touchscreen controller, 3D accelerometer, audio, battery charger gumstix.com 279  ?
USB WiFi dongle WiFi 15  ?
microSD breakout board microSD connector [1] 15 5
PSP LCD 480 x 272px LCD [2] 69 50

[3]

Nokia BL-6C 1070mAh battery ebay.com 5 15g [4]
Case 12*7*.2cm(back)+26*2.5*.2cm(edge) +3.5*12*.2 =37cc rapidobject.com (based on recommended minimum thickness) 98 90-140
Speakers .2W per channel of stereo sound [5] 5 16
Microphone Microphone and mic amp [6] 5 1
Audio amplifier xx xx 10  ?
Total xx xx 665 180

Prices will be reduced, if we as the OpenMoko community buy in bulk.

Capabilities wise, this compares well with the Neo - there is no accelerated graphics and the screen resolution is smaller, but it does have EDGE and a faster processor. Otherwise specs are similar.

From Sketchup models supplied by Gumstix, the size will be around 120 x 67 x 20mm. This is the smallest cuboid into which the main components (motherboard, WiFi, Goliath, screen) will fit. The case will add approx. 2mm to this - battery, microSD and other components should fit into voids between the main circuit boards.

Weight information will be included here as soon as the specs are released by Gumstix.

Where relevant, all components listed have Linux kernel modules supplied by their manufacturer.

Other resources

Home Brew Mobile Phone Club have a site devoted to build-it-yourself mobile phones, based upon Gumstix motherboards. They have schematics, case designs and details of suitable components from many sources.