Manuals/QtMoko/eu

From Openmoko

Revision as of 12:44, 24 February 2010 by Joseba (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Qt Moko

Qt Moko Debian-en oinarritutako Openmoko [Neo Freerunner]] mugikorrerako banaketa da. Telefonoaren erabilera eta erabiltzailearen interfazea Qt Extended Improved-en oinarritzen dira, hau gehienetan Qtopia izenaz ezagutzen da. QtMokoren wikia can honakoan aurkituko duzu.


Deskarga

Honako fitxategiak deskargatu zure mahaigaineko konputagailura radekp download gunetik:

Instalazioa

QtMoko-tik kernel irudia zure freerunnera flassheatzen baduzu, kernela eta fitxategi sistema instalatu behar dituzu (biak). Baina Qi instalatuta baldin badaukazu, orduan mikroSD txartelean instala zenezake QtMoko. Azken bide horrek sistema batekin baino gehiagorekin lan egiteko aukera emango dizu,GRUBak ordenagailuetan sistema eragile bat baino gehiago erabiltzeko aukera ematen duenaren antzera. SD txartela aldatzearekin banaketa ezberdin bat erabil baitaiteke.

Itzali freerunnerra eta sakatu AUX eta pizteko botoia biak batera. Freerrunnerrak honako U-Boot menua erakutsiko dizu:

  *** BOOT MENU (NOR) ***
  Boot
  Boot from Mirco SD (FAT/ext2)
  Set Console to USB
  Set Console to Serial
  Reboot
  Power Off  

Egoera honetan 30 segundo besterik ez da egongo. Denbora tarte horretan dfu-util hasi beharko duzu, bestela beti bezala, betiko sistemarekin, hasiko baita freerunnerra. Kernelaren irudia flasheatu nahi baduzu (zure PCan root baimenekin egon beharko duzu) U-Boot menuak irauten dituen 30 segundo horietan honako agindua eragin beharko duzu:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a kernel -R -D  uImage-v13.bin

and finally the root fs with this one:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a rootfs -R -D qtmoko-debian-v13.jffs2

First Boot

After finishing the installation without errors you have to start the freerunner and calibrate the touch screen. The you see the installed Qt Moko on your device.

Qt Moko after first boot

Login

If you want to login to your freerunner set up network connection (see USB Networking) with USB cable and start:

  desktop# ssh -X -l root 192.168.0.202

The root password is empty so set it for security reason especially when you open the ssh-daemon on the WLAN network interface. Define root password as usual on a linux box with

  neo# passwd

If you have established the internet connection via USB cable then update the repository data:

  neo# apt-get update 

If you want to check if the internet connection is available on your freerunner ping the OpenMoko web server with:

  neo# ping 88.198.93.221
  neo# ping wiki.openmoko.org

If the first ping works and the second doesn't then check the DNS server settings (see USB Networking).


Setting Time and Date

Set the time and date on from your linux box with

ssh root@openmoko "date -us @`date -u +%s`"

If you want to set the time with a NTP Client install the following package, if you have a network connection available (see USB Networking)

# apt-get install ntpdate
# ntpdate-debian

For further detail see Setting Date and Time.

Personal tools

Qt Moko

Qt Moko Debian-en oinarritutako Openmoko [Neo Freerunner]] mugikorrerako banaketa da. Telefonoaren erabilera eta erabiltzailearen interfazea Qt Extended Improved-en oinarritzen dira, hau gehienetan Qtopia izenaz ezagutzen da. QtMokoren wikia can honakoan aurkituko duzu.


Deskarga

Honako fitxategiak deskargatu zure mahaigaineko konputagailura radekp download gunetik:

Instalazioa

QtMoko-tik kernel irudia zure freerunnera flassheatzen baduzu, kernela eta fitxategi sistema instalatu behar dituzu (biak). Baina Qi instalatuta baldin badaukazu, orduan mikroSD txartelean instala zenezake QtMoko. Azken bide horrek sistema batekin baino gehiagorekin lan egiteko aukera emango dizu,GRUBak ordenagailuetan sistema eragile bat baino gehiago erabiltzeko aukera ematen duenaren antzera. SD txartela aldatzearekin banaketa ezberdin bat erabil baitaiteke.

Itzali freerunnerra eta sakatu AUX eta pizteko botoia biak batera. Freerrunnerrak honako U-Boot menua erakutsiko dizu:

  *** BOOT MENU (NOR) ***
  Boot
  Boot from Mirco SD (FAT/ext2)
  Set Console to USB
  Set Console to Serial
  Reboot
  Power Off  

Egoera honetan 30 segundo besterik ez da egongo. Denbora tarte horretan dfu-util hasi beharko duzu, bestela beti bezala, betiko sistemarekin, hasiko baita freerunnerra. Kernelaren irudia flasheatu nahi baduzu (zure PCan root baimenekin egon beharko duzu) U-Boot menuak irauten dituen 30 segundo horietan honako agindua eragin beharko duzu:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a kernel -R -D  uImage-v13.bin

and finally the root fs with this one:

# for the Neo FreeRunner:
dfu-util -d 0x1d50:0x5119 -a rootfs -R -D qtmoko-debian-v13.jffs2

First Boot

After finishing the installation without errors you have to start the freerunner and calibrate the touch screen. The you see the installed Qt Moko on your device.

Qt Moko after first boot

Login

If you want to login to your freerunner set up network connection (see USB Networking) with USB cable and start:

  desktop# ssh -X -l root 192.168.0.202

The root password is empty so set it for security reason especially when you open the ssh-daemon on the WLAN network interface. Define root password as usual on a linux box with

  neo# passwd

If you have established the internet connection via USB cable then update the repository data:

  neo# apt-get update 

If you want to check if the internet connection is available on your freerunner ping the OpenMoko web server with:

  neo# ping 88.198.93.221
  neo# ping wiki.openmoko.org

If the first ping works and the second doesn't then check the DNS server settings (see USB Networking).


Setting Time and Date

Set the time and date on from your linux box with

ssh root@openmoko "date -us @`date -u +%s`"

If you want to set the time with a NTP Client install the following package, if you have a network connection available (see USB Networking)

# apt-get install ntpdate
# ntpdate-debian

For further detail see Setting Date and Time.