LM4857

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(move switching to WM8753)
(LM4857 mode numbers, mono input unused)
Line 8: Line 8:
 
* Line-out, unused.
 
* Line-out, unused.
  
There is a stereo (LIN and RIN) and a mono (MIN) input. These are connected to [[WM8753]].
+
The stereo (LIN and RIN) input is connected to [[WM8753]]. The mono (MIN) input is not used.
  
 
Mixer settings starting "Amp" control it via [[I2C]], including:
 
Mixer settings starting "Amp" control it via [[I2C]], including:
* Amp Mode: Off, Call Speaker, Stereo Speakers, Stereo Speakers + Headphones, Headphones
+
* Amp Mode: Off (mode 0), Call Speaker (mode 6), Stereo Speakers (mode 7), Stereo Speakers + Headphones (mode 8), Headphones (mode 9)
 
* The volume controls Amp Left and Amp Right, and Amp Mono
 
* The volume controls Amp Left and Amp Right, and Amp Mono
 
* Amp Earpiece 6dB toggle amplifies the call speaker output
 
* Amp Earpiece 6dB toggle amplifies the call speaker output
Line 18: Line 18:
  
 
* [http://www.national.com/pf/LM/LM4857.html The National Semiconductor product page for LM4857]
 
* [http://www.national.com/pf/LM/LM4857.html The National Semiconductor product page for LM4857]
 +
* [http://www.national.com/ds/LM/LM4857.pdf The LM4857 data sheet] (PDF)
  
 
[[Category:Neo1973 Hardware]]
 
[[Category:Neo1973 Hardware]]

Revision as of 02:29, 27 November 2007

The LM4857 is an audio power amplifier and part of the Neo1973 audio subsystem. It's connected to the VB power rail (battery terminal voltage) for power and thus needs to be powered off separately from the main system.

The audio power output may vary as the battery discharges:

  • 0.5W per-channel stereo speaker output, used for the main speakers (LLS+- and RLS+-)
  • 33mW per-channel stereo headphone output (32 ohms), for the headset (LHP and RHP)
  • 43mW mono earpiece output, for the earpiece (EP+-)
  • Line-out, unused.

The stereo (LIN and RIN) input is connected to WM8753. The mono (MIN) input is not used.

Mixer settings starting "Amp" control it via I2C, including:

  • Amp Mode: Off (mode 0), Call Speaker (mode 6), Stereo Speakers (mode 7), Stereo Speakers + Headphones (mode 8), Headphones (mode 9)
  • The volume controls Amp Left and Amp Right, and Amp Mono
  • Amp Earpiece 6dB toggle amplifies the call speaker output

External links

Personal tools

The LM4857 is an audio power amplifier and part of the Neo1973 audio subsystem. It's connected to the VB power rail (battery terminal voltage) for power and thus needs to be powered off separately from the main system.

The audio power output may vary as the battery discharges:

  • 0.5W per-channel stereo speaker output, used for the main speakers (LLS+- and RLS+-)
  • 33mW per-channel stereo headphone output (32 ohms), for the headset (LHP and RHP)
  • 43mW mono earpiece output, for the earpiece (EP+-)
  • Line-out, unused.

There is a stereo (LIN and RIN) and a mono (MIN) input. These are connected to WM8753.

Mixer settings starting "Amp" control it via I2C, including:

  • Amp Mode: Off, Call Speaker, Stereo Speakers, Stereo Speakers + Headphones, Headphones
  • The volume controls Amp Left and Amp Right, and Amp Mono
  • Amp Earpiece 6dB toggle amplifies the call speaker output

External links