Keyboard Toggle

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (illume => {THEME} because it's not obviously illume theme.)
m (In base-image (testing))
Line 59: Line 59:
  
 
   sed -i -e s,asu,illume, /etc/enlightenment/default_profile
 
   sed -i -e s,asu,illume, /etc/enlightenment/default_profile
  restart X
+
 
  waiting for few seconds
+
And you have to restart the X to apply changes
 +
 
 +
/etc/init.d/xserver-nodm restart
 +
 
 +
after waiting for few seconds you get result
  
 
[http://lists.openmoko.org/pipermail/devel/2008-September/001758.html Reference]
 
[http://lists.openmoko.org/pipermail/devel/2008-September/001758.html Reference]

Revision as of 09:44, 7 April 2009

The Om 2008.8 and Om 2007.2 Openmoko distributions have been designed to bring up an on-screen keyboard which supplies keystroke information to applications. However, this requires the cooperation of the application, which is a problem for software designed with another X11 based phone stack in mind, or software which has been quickly ported from Linux desktop systems, because it will never bring up a keyboard for (possibly important) keystroke information. It is also possible that the keyboard could be brought or remain up by accident when you don't want it there, or even software specifically designed with this functionality in mind may occasionally fail or become confused when an on screen keyboard is supposed to be available.

See Om2008.8 Keyboard for details of the Om 2008.8 keyboard's usage.

Contents

Alternatives

Alternatively, you can try connecting a bluetooth keyboard or USB keyboard (Only available with a special cable, or an extra special cable in the case of the older unpowered USB units.)

Reactivating the keyboard toggle under Om 2008.8

For advanced users using the Om 2008.8 distribution, it may be worth your while to change the E17 theme information which prevents the 'qwerty' link in the upper left from showing.

On the phone

Method 1

Simply install the illume-config theme:

opkg install illume-config

Attention: With a Om2008.8 you have then the qpe bug [1]. The 'new' Om2008.9-gta02-20081117.rootfs.tar.gz did not have this bug, so a

tar -zxf /media/mmcblk0p2/ in / 

fix the bug, but then your settings are restored.

Method 2

Install the tools required to decompile and recompile E17 theme code.

opkg install libevas-saver-png edje-utils cpp cpp-symlinks libembryo-tests

Decompile the theme (asu or illume), and edit the edc file

cd /usr/share/enlightenment/data/themes
edje_decc {THEME}.edj
cd {THEME}
vi freerunner.edc

Search for the text 'qwerty'. This should take you to the section which defines the small 'qwerty' button in the upper left.

  • Under 'part { name: "kbd";' change 'visible 0;' to 'visible 1;', and change 'relative: 0.0 1.0; ' to 'relative: 1.0 1.0; '
  • Under 'part { name: "kbdtext";' change 'visible 0;' to 'visible 1;'

And then recompile the .edj

sh build.sh
mv {THEME}.edj ../{THEME}.edj

And finally restart X to take new theme in use

/etc/init.d/xserver-nodm restart

Building a custom package

If that doesn't work, follow the instructions on building Om 2008.8 from source. Unpack the source for the package 'illume-theme', edit its edc file using the same method described above, and then finish building the ipk. You should be able to install this ipk, overiding the previous configuration.

Upgrading

If you upgrade, such as with opkg upgrade, you may have to perform the modification again.

In base-image (testing)

The openmoko-base-image installs both illume and asu themes. You can change theme by editing E's profile. To get QWERTY and the wrench back in base-image, you have use the illume theme. So there are 3 steps to do:

 sed -i -e s,asu,illume, /etc/enlightenment/default_profile

And you have to restart the X to apply changes

/etc/init.d/xserver-nodm restart

after waiting for few seconds you get result

Reference

NOTE: this is not necessary, see page Enlightenment .cfg, it will guide you to get Wrench & QWERTY button & Illume/Raster's keyboard in ASU theme


Englightments segfaults with Illume theme too often?

If after switching to illume theme, you experience plentiful of WDOD (white dialog of death) stating that you should recompile and gdb the Enlightenment, you have two choices:

  1. Disable 'Dropshadow' module (go to illume config (Wrench) -> Modules). It still might segfault at some places but now phone becomes usable with illume theme
  2. Switch to software_x from software_16 (same illume config (Wrench) -> Engine). The side-effect is general slow down of graphics performance

Relevant bug reports: 1767

Personal tools

The Om 2008.8 and Om 2007.2 Openmoko distributions have been designed to bring up an on-screen keyboard which supplies keystroke information to applications. However, this requires the cooperation of the application, which is a problem for software designed with another X11 based phone stack in mind, or software which has been quickly ported from Linux desktop systems, because it will never bring up a keyboard for (possibly important) keystroke information. It is also possible that the keyboard could be brought or remain up by accident when you don't want it there, or even software specifically designed with this functionality in mind may occasionally fail or become confused when an on screen keyboard is supposed to be available.

See Om2008.8 Keyboard for details of the Om 2008.8 keyboard's usage.

Alternatives

Alternatively, you can try connecting a bluetooth keyboard or USB keyboard (Only available with a special cable, or an extra special cable in the case of the older unpowered USB units.)

Reactivating the keyboard toggle under Om 2008.8

For advanced users using the Om 2008.8 distribution, it may be worth your while to change the E17 theme information which prevents the 'qwerty' link in the upper left from showing.

On the phone

Method 1

Simply install the illume-config theme:

opkg install illume-config

Attention: With a Om2008.8 you have then the qpe bug [1]. The 'new' Om2008.9-gta02-20081117.rootfs.tar.gz did not have this bug, so a

tar -zxf /media/mmcblk0p2/ in / 

fix the bug, but then your settings are restored.

Method 2

Install the tools required to decompile and recompile E17 theme code.

opkg install libevas-saver-png edje-utils cpp cpp-symlinks libembryo-tests

Decompile the theme (asu or illume), and edit the edc file

cd /usr/share/enlightenment/data/themes
edje_decc {THEME}.edj
cd {THEME}
vi freerunner.edc

Search for the text 'qwerty'. This should take you to the section which defines the small 'qwerty' button in the upper left.

  • Under 'part { name: "kbd";' change 'visible 0;' to 'visible 1;', and change 'relative: 0.0 1.0; ' to 'relative: 1.0 1.0; '
  • Under 'part { name: "kbdtext";' change 'visible 0;' to 'visible 1;'

And then recompile the .edj

sh build.sh
mv {THEME}.edj ../{THEME}.edj

And finally restart X to take new theme in use

/etc/init.d/xserver-nodm restart

Building a custom package

If that doesn't work, follow the instructions on building Om 2008.8 from source. Unpack the source for the package 'illume-theme', edit its edc file using the same method described above, and then finish building the ipk. You should be able to install this ipk, overiding the previous configuration.

Upgrading

If you upgrade, such as with opkg upgrade, you may have to perform the modification again.

In base-image (testing)

The openmoko-base-image installs both illume and asu themes. You can change theme by editing E's profile. To get QWERTY and the wrench back in base-image, you have use the illume theme. So there are 3 steps to do:

 sed -i -e s,asu,illume, /etc/enlightenment/default_profile

And you have to restart the X to apply changes

/etc/init.d/xserver-nodm restart

after waiting for few seconds you get result

Reference

NOTE: this is not necessary, see page Enlightenment .cfg, it will guide you to get Wrench & QWERTY button & Illume/Raster's keyboard in ASU theme


Englightments segfaults with Illume theme too often?

If after switching to illume theme, you experience plentiful of WDOD (white dialog of death) stating that you should recompile and gdb the Enlightenment, you have two choices:

  1. Disable 'Dropshadow' module (go to illume config (Wrench) -> Modules). It still might segfault at some places but now phone becomes usable with illume theme
  2. Switch to software_x from software_16 (same illume config (Wrench) -> Engine). The side-effect is general slow down of graphics performance

Relevant bug reports: 1767