Kernel-vanilla

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Drivers and patches)
(Drivers and patches: buttons, leds and vibrator added to table)
Line 115: Line 115:
 
|yes
 
|yes
 
|[http://groups.google.com/group/linux.kernel/browse_thread/thread/4ad55a057cb300fd/15f3e20bd78c44e2 RFC]
 
|[http://groups.google.com/group/linux.kernel/browse_thread/thread/4ad55a057cb300fd/15f3e20bd78c44e2 RFC]
 +
|
 +
|-
 +
 +
|gta02 buttons
 +
|
 +
|no
 +
|yes
 +
|[http://lists.infradead.org/pipermail/linux-arm-kernel/2009-November/005084.html posted]
 +
|
 +
|-
 +
 +
|gta02 LEDs
 +
|
 +
|no
 +
|yes
 +
|[http://lists.infradead.org/pipermail/linux-arm-kernel/2009-November/005081.html posted]
 +
|
 +
|-
 +
 +
|gta02 vibrator
 +
|
 +
|no
 +
|yes
 +
|[http://lists.infradead.org/pipermail/linux-arm-kernel/2009-November/005082.html posted]
 
|
 
|
 
|-
 
|-

Revision as of 21:40, 6 December 2009

This page is about vanilla Linux (Linux without any extra patches).

Functionality

This section is about general functionality using vanilla Linux.

  • Functionality is the function of the phone
  • GTA01 and GTA02 is if the GTA01 or GTA02 has it
Functionality GTA01 GTA02
boot yes
log in using ssh yes
log in using serial console yes
Display stuff on screen no

Drivers and patches

This section is about specific drivers and patches. Originally based on this email message by Lars-Peter Clausen.

  • Functionality is what functionality on the phone it provides
  • GTA01 and GTA02 is if the GTA01 or GTA02 needs it
  • Inclusion status is what status it now has in vanilla Linux. For example "in staging" if it's in staging, "included" if it's part of mainline outside staging, etc.
  • Tested and confirmed to work is if anybody has been able to use the functionality on vanilla Linux
Driver / patch Functionality GTA01 GTA02 Inclusion status Tested and confirmed to work
pcf50606 power management yes no not included
pcf50633 power management no yes included
glamo graphics microSD no yes not included
lis302dl accelerometer no yes
ar6000 WiFi no yes not included
ASoC (neo1973_gta02_wm8753) sound no yes included
touchscreen yes yes alternative en route
jbt6k display yes yes not included
generic battery driver yes yes RFC
gta02 buttons no yes posted
gta02 LEDs no yes posted
gta02 vibrator no yes posted
dual packet workaround Fix slow ssh ? yes

Building and using a vanilla kernel

Before you start you should be warned that if anything goes wrong, say for example that the newest kernel introduce code that makes your phone explode, you your self is responsible for it. First you need the sources to a vanilla kernel that supports you phone. The Freerunner is supported from right before 2.6.32-rc6. You can download it from http://kernel.org/ and unpack it or check it out from git if you want the absolute newest version. To check it out from git go to the command line, navigate to the folder you want to download it to and run:

git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Then you need a config. You can find one here. Replace /path/to/config in the make command with where you stored it. Now, on the command line, enter the folder where Linux is. To keep the result from the compiling separate from the code create a folder to put it in. I will use GTA02 as the folder name in this example

mkdir GTA02

If you are using a cross compiler you need to specify its prefix. In this example it is arm-linux-gnueabi- but you could have another. (In arm-linux-gnueabi-cpp arm-linux-gnueabi- is the prefix) If not you should remove the CROSS_COMPILE argument. Now, run

cp /path/to/config GTA02/.config
make O=GTA02 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- oldconfig
make O=GTA02 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-

After it has compiled do

arm-linux-gnueabi-objcopy -O binary -R .note -R .comment -S GTA02/arch/arm/boot/compressed/vmlinux GTA02/linux.bin

Then pack it in an image you can Flash to your Freerunner with

mkimage -A arm -O linux -T kernel -C none -a 30008000 -e 30008000 -n "Freerunner GTA02 vanilla" -d GTA02/linux.bin GTA02/uImage-gta02.bin

You can now flash it to your phone

Personal tools

This page is about vanilla Linux (Linux without any extra patches).

Functionality

This section is about general functionality using vanilla Linux.

  • Functionality is the function of the phone
  • GTA01 and GTA02 is if the GTA01 or GTA02 has it
Functionality GTA01 GTA02
boot yes
log in using ssh yes
log in using serial console yes
Display stuff on screen no

Drivers and patches

This section is about specific drivers and patches. Originally based on this email message by Lars-Peter Clausen.

  • Functionality is what functionality on the phone it provides
  • GTA01 and GTA02 is if the GTA01 or GTA02 needs it
  • Inclusion status is what status it now has in vanilla Linux. For example "in staging" if it's in staging, "included" if it's part of mainline outside staging, etc.
  • Tested and confirmed to work is if anybody has been able to use the functionality on vanilla Linux
Driver / patch Functionality GTA01 GTA02 Inclusion status Tested and confirmed to work
pcf50606 power management yes no not included
pcf50633 power management no yes included
glamo graphics microSD no yes not included
lis302dl accelerometer no yes
ar6000 WiFi no yes not included
ASoC (neo1973_gta02_wm8753) sound no yes included
touchscreen yes yes alternative en route
jbt6k display yes yes not included
generic battery driver yes yes RFC
dual packet workaround Fix slow ssh ? yes

Building and using a vanilla kernel

Before you start you should be warned that if anything goes wrong, say for example that the newest kernel introduce code that makes your phone explode, you your self is responsible for it. First you need the sources to a vanilla kernel that supports you phone. The Freerunner is supported from right before 2.6.32-rc6. You can download it from http://kernel.org/ and unpack it or check it out from git if you want the absolute newest version. To check it out from git go to the command line, navigate to the folder you want to download it to and run:

git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Then you need a config. You can find one here. Replace /path/to/config in the make command with where you stored it. Now, on the command line, enter the folder where Linux is. To keep the result from the compiling separate from the code create a folder to put it in. I will use GTA02 as the folder name in this example

mkdir GTA02

If you are using a cross compiler you need to specify its prefix. In this example it is arm-linux-gnueabi- but you could have another. (In arm-linux-gnueabi-cpp arm-linux-gnueabi- is the prefix) If not you should remove the CROSS_COMPILE argument. Now, run

cp /path/to/config GTA02/.config
make O=GTA02 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- oldconfig
make O=GTA02 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-

After it has compiled do

arm-linux-gnueabi-objcopy -O binary -R .note -R .comment -S GTA02/arch/arm/boot/compressed/vmlinux GTA02/linux.bin

Then pack it in an image you can Flash to your Freerunner with

mkimage -A arm -O linux -T kernel -C none -a 30008000 -e 30008000 -n "Freerunner GTA02 vanilla" -d GTA02/linux.bin GTA02/uImage-gta02.bin

You can now flash it to your phone