Ipkg

From Openmoko

Revision as of 07:49, 25 July 2009 by Glenn (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
TODO: Integrate useful content into Opkg as a usage section. (See: To-Do List)


Ipkg is a lightweight package management system.

Contents

History

Ipkg re-implements for embedded systems the functionality of Debian tools dpkg, apt, and apt-get. For example, it uses much less disk space for the package metadata.

Installing Packages to the Memory Card

You can use ipkg to install packages to a folder on the memory card. To do this you'll need the following:

Ext2 Formatted Memory Card

By default, the memory card comes formated with VFAT (Windows Format). You need to re-format the card with EXT2. You will not be able to view the files on the card using a windows system after this.

To check if your card is using vfat or ext, run the 'mount' command, and look for: /dev/mmcblk0p1 on /media/card.

On the NEO, run the following: This will erase everything on your memory card

umount /media/card
fdisk /dev/mmcblk0
t
83
w
mke2fs /dev/mmcblk0
mount /media/card

Entry in opkg.conf File

In your /etc/opkg.conf file, after "dest root /" add a new line:

dest card /media/card/opkg

Create /media/card/opkg folder

mkdir /media/card/opkg

Installing Packages on the Card

When installing a package, use the -d option to have the package installed into the "card" destination:

opkg install -d card python-core

This will put all files (binaries and libraries) on the card, under the folder specified in the ipkg.conf file.

Linking/Using Packages on the Card

Your system will not be able to see the packages that you just added to your card. There are two ways to remedy this. The better solution is to use ipkg-link from the 'ipkg-utils' package, but 'better' is always subjective - YMMV.

1: Ipkg Utils and ipkg-link

Ipkg-utils is a package that provides some additional functionality for ipkg. A very useful tool is ipkg-link, which creates symbolic links for packages installed in non-root locations (such as a card) back to the root file system.

To make this working with Opkg, you've simply to do:

ln -s /etc/opkg.conf /etc/ipkg.conf
ln -s /media/card/opkg/usr/lib/opkg /media/card/opkg/usr/lib/ipkg

To get ipkg-utils, run:

opkg install ipkg-utils

To create symbolic links to your root system for a specific package, run: ipkg-link add <package>. For example, for python-core use:

ipkg-link add python-core

To create symbolic links for all packages installed in a location, run:

ipkg-link mount /media/card/ipkg

The ipkg-link remove and ipkg-link unmount commands remove the symlinks for a package or all packages.

There is a list of the options for the ipkg command under "How do I use it?" here.

2: Adding the card PATH and LIB directories to your path

Another way to add bin and lib files to your system is by modifying your environment variables in /etc/profile as follows:

On the line that defines the PATH variable, add:

PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:/media/card/ipkg/usr/bin

Then, before the 'export' line add:

LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/media/card/ipkg/usr/lib

Then modify the 'export' line and add LD_LIBRARY_PATH to the end.

This will let the system see the binary and library files, but it will not see other resources, such as images, configuration files, desktop files, etc. For this reason, ipkg-link is preferred.

Personal tools
TODO: Integrate useful content into Opkg as a usage section. (See: To-Do List)


Ipkg is a lightweight package management system.

History

Ipkg re-implements for embedded systems the functionality of Debian tools dpkg, apt, and apt-get. For example, it uses much less disk space for the package metadata.

Installing Packages to the Memory Card

You can use ipkg to install packages to a folder on the memory card. To do this you'll need the following:

Ext2 Formatted Memory Card

By default, the memory card comes formated with VFAT (Windows Format). You need to re-format the card with EXT2. You will not be able to view the files on the card using a windows system after this.

To check if your card is using vfat or ext, run the 'mount' command, and look for: /dev/mmcblk0p1 on /media/card.

On the NEO, run the following: This will erase everything on your memory card

umount /media/card
fdisk /dev/mmcblk0
t
83
w
mke2fs /dev/mmcblk0
mount /media/card

Entry in opkg.conf File

In your /etc/opkg.conf file, after "dest root /" add a new line:

dest card /media/card/opkg

Create /media/card/opkg folder

mkdir /media/card/opkg

Installing Packages on the Card

When installing a package, use the -d option to have the package installed into the "card" destination:

opkg install -d card python-core

This will put all files (binaries and libraries) on the card, under the folder specified in the ipkg.conf file.

Linking/Using Packages on the Card

Your system will not be able to see the packages that you just added to your card. There are two ways to remedy this. The better solution is to use ipkg-link from the 'ipkg-utils' package, but 'better' is always subjective - YMMV.

1: Ipkg Utils and ipkg-link

Ipkg-utils is a package that provides some additional functionality for ipkg. A very useful tool is ipkg-link, which creates symbolic links for packages installed in non-root locations (such as a card) back to the root file system.

To make this working with Opkg, you've simply to do:

ln -s /etc/opkg.conf /etc/ipkg.conf
ln -s /media/card/opkg/usr/lib/opkg /media/card/opkg/usr/lib/ipkg

To get ipkg-utils, run:

opkg install ipkg-utils

To create symbolic links to your root system for a specific package, run: ipkg-link add <package>. For example, for python-core use:

ipkg-link add python-core

To create symbolic links for all packages installed in a location, run:

ipkg-link mount /media/card/ipkg

The ipkg-link remove and ipkg-link unmount commands remove the symlinks for a package or all packages.

There is a list of the options for the ipkg command under "How do I use it?" here.

2: Adding the card PATH and LIB directories to your path

Another way to add bin and lib files to your system is by modifying your environment variables in /etc/profile as follows:

On the line that defines the PATH variable, add:

PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:/media/card/ipkg/usr/bin

Then, before the 'export' line add:

LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/media/card/ipkg/usr/lib

Then modify the 'export' line and add LD_LIBRARY_PATH to the end.

This will let the system see the binary and library files, but it will not see other resources, such as images, configuration files, desktop files, etc. For this reason, ipkg-link is preferred.