Hspa-stick

From Openmoko

Revision as of 20:37, 6 August 2008 by Timo (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Just for clarification freerunner do not support HSPA.

Here i will describe a way to get a HSPA USB stick working with the Freerunner. ( Tested with the Novatel MC950D )

1. Install crosscompile environment http://wiki.openmoko.org/wiki/Toolchain

2. on the phone:

opkg info kernel
Package: kernel
Version: 2.6.24+gitr0+7a1370a816b9348dd8f36a667905dd3533cefc9b-r4
Depends: kernel-2.6.24
Status: install ok installed
Architecture: om-gta02
Installed-Time: 1217369038

copy the git serial number: 7a1370a816b9348dd8f36a667905dd3533cefc9b

on host:

git clone git://git.openmoko.org/git/kernel.git 7a1370a816b9348dd8f36a667905dd3533cefc9b

after download go to the directory created and execute following commands:

Download .config file for installed kernel. (Hmm plz can someone add this info) search the line: CONFIG_UDF_FS=n and replace with: CONFIG_UDF_FS=m

compile the kernel and modules

. /usr/local/openmoko/arm/setup-env
export CROSS_COMPILE=arm-angstrom-linux-gnueabi-
make -f synthesize-gta-module-configs.mak
make ARCH=arm
make ARCH=arm modules



Turn USB into host mode: (http://wiki.openmoko.org/wiki/Neo_1973_USB_host)

Personal tools

Just for clarification freerunner do not support HSPA.

Here i will describe a way to get a HSPA USB stick working with the Freerunner. ( Tested with the Novatel MC950D )

1. Install crosscompile environment http://wiki.openmoko.org/wiki/Toolchain

2. on the phone:

opkg info kernel
Package: kernel
Version: 2.6.24+gitr0+7a1370a816b9348dd8f36a667905dd3533cefc9b-r4
Depends: kernel-2.6.24
Status: install ok installed
Architecture: om-gta02
Installed-Time: 1217369038

copy the git serial number: 7a1370a816b9348dd8f36a667905dd3533cefc9b

on host:

git clone git://git.openmoko.org/git/kernel.git 7a1370a816b9348dd8f36a667905dd3533cefc9b

after download go to the directory created and execute following commands:

Download .config file for installed kernel. (Hmm plz can someone add this info) search the line: CONFIG_UDF_FS=n and replace with: CONFIG_UDF_FS=m

compile the kernel and modules

. /usr/local/openmoko/arm/setup-env
export CROSS_COMPILE=arm-angstrom-linux-gnueabi-
make -f synthesize-gta-module-configs.mak
make ARCH=arm
make ARCH=arm modules



Turn USB into host mode: (http://wiki.openmoko.org/wiki/Neo_1973_USB_host)