Hot code loading
To change a running system
Start erlang as a node
This is my /etc/X11/Xsession.d/80zhone. As you can see the erlang node's got a name "-name neo" (a running erlang virtual machine is called an erlang node). And it's got a cookie "-setcookie SFEWRG34AFDSGAFG35235".
#!/bin/sh -e #zhone > /tmp/zhone.log 2>&1 & /home/root/cean/start.sh -setcookie SFEWRG34AFDSGAFG35235 -name email@example.com -noshell -pa /home/root/trunk -s main start > debug.txt renice -3 $! exit 0
Every erlang node in your network should have a unique name, and a common cookie. Start an erlang node on your host PC with a unique name and the common cookie:
erl -setcookie SFEWRG34AFDSGAFG35235 -name 'firstname.lastname@example.org'
From your host erlang console try
The response should be 'pong' if you have a successful connection - if not the response is 'pang'
Then try the shell command
The response should be a list of all known nodes in your network.
Load the code
To carry out Hot Code Loading you start a an erlang node on your host (remember to set a different name and to use the same cookie) and from the host erlang shell type nl(your_modulename). Substitute your_modulename with the name of the module you want to load into the virtual machine.