View source for Hot code loading

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Return to Hot code loading.

Personal tools

To change a running erlang system

Start an erlang node on your host

This is my /etc/X11/Xsession.d/80zhone. As you can see the erlang node's got a name "-name neo@" (a running erlang virtual machine is called an erlang node). And it's got a cookie "-setcookie SFEWRG34AFDSGAFG35235". This is all that's needed on the neo.

#!/bin/sh -e
#zhone > /tmp/zhone.log 2>&1 &
/home/root/cean/ -setcookie SFEWRG34AFDSGAFG35235 -name neo@ -noshell -pa /home/root/trunk -s main start > debug.txt
renice -3 $!
exit 0

Every erlang node in your network should have a unique name, and a common cookie. Start an erlang node on your host PC with a unique name and the common cookie:

erl -setcookie SFEWRG34AFDSGAFG35235 -name 'host@'

Once again - first make sure you can access your neo from the host with ping, ssh ,rcp etc. Then, from your host erlang console try


The response should be 'pong' if you have a successful connection - if not, the response is 'pang'

Then try the shell command


The response should be a list of all known nodes in your network.

HotLoad the code

To carry out Hot Code Loading type - on your host erlang console - and make sure erlang can find the compiled module 'your_modulename' on the local file system:


nl() is short for network_load and will remotely load a compiled erlang module on every connected node on your network.

Substitute your_modulename with the name of the module you want to load into the virtual machine on your neo. The response should be 'abcast' if sucessful. If not the response is 'error'.

The ping command is only necessary the first time to let your host node find your neo node. When you are finished, don't forget to copy the compiled erlang file to your neo, hot code loading does not copy your beam file to the remote file system.

Example Code

There is only one thing you must know when using hot code loading, and that is what makes your code reload. Every time the erlang VM finds a module_name:function_name() in your code it looks for (and uses) the most recent version it has loaded. So - just export your loop function and preface it in your calls with the module macro ?MODULE:


loop(Pid,Display,Win,Buttons,Dbus,F_hash,Pos,Number,Spot,Hotspots) ->
        {event,_,configureNotify,_} ->
	{event,_, buttonPress, {_,X,Y,_,_}} ->
            Spot1 = finger_at({X,Y},Hotspots),
            Pid ! {touching,Spot1},