Hardware:Neo 1973:Alternate Cases

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Notes)
(Notes)
Line 53: Line 53:
 
None of this can be accomplished without the dimensions of existing phones - if FIC are unable/unwilling to release precise dimensions, a user of a Neo1973 will need to measure their phone and upload the information to [[Neo1973 case schematics]] in the form of a 3D CAD model.
 
None of this can be accomplished without the dimensions of existing phones - if FIC are unable/unwilling to release precise dimensions, a user of a Neo1973 will need to measure their phone and upload the information to [[Neo1973 case schematics]] in the form of a 3D CAD model.
  
Some users may want combinations of the variants listed - popular/simple options such as Stylus Mount/Different speaker orientation/Extra battery/Extra storage may be combined into one model. This should be taken into account when creating 3D models; i.e. it will simplify things later if the addition of (say) a solar panel, does not encroach on the area used for a tough strip, etc.
+
Some users may want combinations of the variants listed - popular/simple options such as Stylus Mount/Different speaker orientation/Extra battery/Extra storage may be combined into one model. This should be taken into account when creating 3D models; i.e. it will simplify things later if the addition of (say) a solar panel, does not encroach on the area used for a touch strip, etc.
  
 
== Design Variant Suggestions ==
 
== Design Variant Suggestions ==

Revision as of 23:42, 11 March 2008

This page is a repository for alternate case designs for the Neo1973, intended to be designed, built and fitted by the community/the phone's owner. Many specific suggestions can be found in Wish List - Hardware#Casing and corresponding links.

Each alternate case design suggestion needs some or all of: a description, intended uses, design options, a 3D model in an open format (e.g. .stl, .blend (Blender), .obj (Wavefront), .aoi (Art of Illusion) ), rendered images of the intended design, materials, components and information regarding interfacing electronically to components within the phone.

Contents

Manufacture

There are numerous rapid prototyping companies that will very cheaply make small run components from various polymers, including:

ABS Protytpes - Invalid website name

Ponoko - requires EPS files (makes 2D flat cut-outs)

Rapid Object - requires STL or VRML (for extra detailed models) files

Rapid Prototyping New Zealand - 3D powder based printer, not particularly well suited to this application.

Red Eye RPM - requires STL files

Other materials may require traditional manufacturing techniques including milling, forging, injection-moulding, either by the user or short-run companies such as:

eMachine Shop - Requires companies own MS Windows based drawing software

(4 axis) gantry style cnc router for hire. Click for inquiries

Techshop

Cost Example

Rapid Object charge from 1.9 Euros per cm^3 of material (photosensitive polymer) used, plus postage. The case for the Neo looks to be about 1.5mm thick, so conservatively, the back of the case will be approximately:
120 x 60 x 1.5
+ 120 x 9 x 1.5 x 2 (2 sides)
= 10,800
+ 3,240

= 14,040 mm^3

~ 14 cm^3

~ 26 Euros

and the front will be (allowing for the screen hole):
(120 x 60 - 43 x 58) x 1.5
+ 120 x 9 x 1.5 x 2 (2 sides)
= 7,059
+ 3,240

= 10,299 mm^3

~ 10cm^3

~ 19 Euros

Notes

None of this can be accomplished without the dimensions of existing phones - if FIC are unable/unwilling to release precise dimensions, a user of a Neo1973 will need to measure their phone and upload the information to Neo1973 case schematics in the form of a 3D CAD model.

Some users may want combinations of the variants listed - popular/simple options such as Stylus Mount/Different speaker orientation/Extra battery/Extra storage may be combined into one model. This should be taken into account when creating 3D models; i.e. it will simplify things later if the addition of (say) a solar panel, does not encroach on the area used for a touch strip, etc.

Design Variant Suggestions

Some of these are a copy of requests in Wish List - Hardware#Casing, some are from ideas thrown up in the community mailing list.

Many of these cannot be implemented without some design changes to the phone PCB. As mentioned in Expansion Back

Alternate Case Suggestion Format

  • 1 Rendered images
    • Images & any videos
    • Neo1973.png
  • 2 3D model
  • 3 Etching templates
  • 4 Materials
  • 5 Processes
  • 6 Interest
    • who's interested in this design


Personal tools

This page is a repository for alternate case designs for the Neo1973, intended to be designed, built and fitted by the community/the phone's owner. Many specific suggestions can be found in Wish List - Hardware#Casing and corresponding links.

Each alternate case design suggestion needs some or all of: a description, intended uses, design options, a 3D model in an open format (e.g. .stl, .blend (Blender), .obj (Wavefront), .aoi (Art of Illusion) ), rendered images of the intended design, materials, components and information regarding interfacing electronically to components within the phone.

Manufacture

There are numerous rapid prototyping companies that will very cheaply make small run components from various polymers, including:

ABS Protytpes - Invalid website name

Ponoko - requires EPS files (makes 2D flat cut-outs)

Rapid Object - requires STL or VRML (for extra detailed models) files

Rapid Prototyping New Zealand - 3D powder based printer, not particularly well suited to this application.

Red Eye RPM - requires STL files

Other materials may require traditional manufacturing techniques including milling, forging, injection-moulding, either by the user or short-run companies such as:

eMachine Shop - Requires companies own MS Windows based drawing software

(4 axis) gantry style cnc router for hire. Click for inquiries

Techshop

Cost Example

Rapid Object charge from 1.9 Euros per cm^3 of material (photosensitive polymer) used, plus postage. The case for the Neo looks to be about 1.5mm thick, so conservatively, the back of the case will be approximately:
120 x 60 x 1.5
+ 120 x 9 x 1.5 x 2 (2 sides)
= 10,800
+ 3,240

= 14,040 mm^3

~ 14 cm^3

~ 26 Euros

and the front will be (allowing for the screen hole):
(120 x 60 - 43 x 58) x 1.5
+ 120 x 9 x 1.5 x 2 (2 sides)
= 7,059
+ 3,240

= 10,299 mm^3

~ 10cm^3

~ 19 Euros

Notes

None of this can be accomplished without the dimensions of existing phones - if FIC are unable/unwilling to release precise dimensions, a user of a Neo1973 will need to measure their phone and upload the information to Neo1973 case schematics in the form of a 3D CAD model.

Some users may want combinations of the variants listed - popular/simple options such as Stylus Mount/Different speaker orientation/Extra battery/Extra storage may be combined into one model. This should be taken into account when creating 3D models; i.e. it will simplify things later if the addition of (say) a solar panel, does not encroach on the area used for a tough strip, etc.

Design Variant Suggestions

Some of these are a copy of requests in Wish List - Hardware#Casing, some are from ideas thrown up in the community mailing list.

Many of these cannot be implemented without some design changes to the phone PCB. As mentioned in Expansion Back

Alternate Case Suggestion Format

  • 1 Rendered images
    • Images & any videos
    • Neo1973.png
  • 2 3D model
  • 3 Etching templates
  • 4 Materials
  • 5 Processes
  • 6 Interest
    • who's interested in this design