Hardware:Neo1973:Alternate Cases:Stylus mount

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Interest)
m (Interest)
Line 50: Line 50:
 
|-
 
|-
 
|13.||[[User:777cbr|777cbr]]
 
|13.||[[User:777cbr|777cbr]]
 +
|-
 +
|14.||[[User:Fradeve11|Fradeve11]]
 
|}
 
|}
  
  
 
[[Category:Neo1973_alternate_cases]]
 
[[Category:Neo1973_alternate_cases]]

Revision as of 15:21, 20 September 2007

Alternate case for the Neo1973, with a secure method for storing the stylus when not in use.

Contents

Design options

1. The stylus is pushed end-on into a round hole slightly larger than the stylus and retained by a spring-loaded clip at the end.
1a.A microswitch inside the stylus sleeve triggers power on/wake from hibernate when the stylus is removed (via an ACPI event, likely)
2. The stylus is stored by pushing laterally into a C-section clip.
3. The stylus is attached to the lanyard (while low cost/simple, the stylus is relatively delicate - this may not be suitable)

Rendered images

3D model

Materials

Processes

Stereolithography

Interest

Leave your nickname here if you are interested in having one made. This is not an order form, but is intended to gauge interest before effort is expended designing the case.

No Nick
1. Tetraden
2. Shadowjack
3. ruskie
4. Micktaiwan
5. willjcroz
6. Katoh
7. Filippo
8. Deedend
9. kresp0
10. Wedge
11. Jmax
12. Oatty
13. 777cbr
14. Fradeve11
Personal tools

Alternate case for the Neo1973, with a secure method for storing the stylus when not in use.

Design options

1. The stylus is pushed end-on into a round hole slightly larger than the stylus and retained by a spring-loaded clip at the end.
1a.A microswitch inside the stylus sleeve triggers power on/wake from hibernate when the stylus is removed (via an ACPI event, likely)
2. The stylus is stored by pushing laterally into a C-section clip.
3. The stylus is attached to the lanyard (while low cost/simple, the stylus is relatively delicate - this may not be suitable)

Rendered images

3D model

Materials

Processes

Stereolithography

Interest

Leave your nickname here if you are interested in having one made. This is not an order form, but is intended to gauge interest before effort is expended designing the case.

No Nick
1. Tetraden
2. Shadowjack
3. ruskie
4. Micktaiwan
5. willjcroz
6. Katoh
7. Filippo
8. Deedend
9. kresp0
10. Wedge
11. Jmax
12. Oatty
13. 777cbr
14. Fradeve11