Hardware:Neo1973:Alternate Cases:Stylus mount

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Design options)
m (Interest)
Line 31: Line 31:
 
|-
 
|-
 
|4. ||[[User:Micktaiwan|Micktaiwan]]
 
|4. ||[[User:Micktaiwan|Micktaiwan]]
 +
|-
 +
|5. ||[[User:willjcroz|willjcroz]]
 
|}
 
|}
  
  
 
[[Category:Neo1973_alternate_cases]]
 
[[Category:Neo1973_alternate_cases]]

Revision as of 12:58, 25 July 2007

Alternate case for the Neo1973, with a secure method for storing the stylus when not in use.

Contents

Design options

1. The stylus is pushed end-on into a round hole slightly larger than the stylus and retained by a spring-loaded clip at the end.
2. The stylus is stored by pushing laterally into a C-section clip.
3. The stylus is attached to the lanyard (while low cost/simple, the stylus is relatively delicate - this may not be suitable)

Rendered images

3D model

Materials

Processes

Stereolithography

Interest

Leave your nickname here if you are interested in having one made. This is not an order form, but is intended to gauge interest before effort is expended designing the case.

No Nick
1. Tetraden
2. Shadowjack
3. ruskie
4. Micktaiwan
5. willjcroz
Personal tools

Alternate case for the Neo1973, with a secure method for storing the stylus when not in use.

Design options

1. The stylus is pushed end-on into a round hole slightly larger than the stylus and retained by a spring-loaded clip at the end.
2. The stylus is stored by pushing laterally into a C-section clip.
3. The stylus is attached to the lanyard (while low cost/simple, the stylus is relatively delicate - this may not be suitable)

Rendered images

3D model

Materials

Processes

Stereolithography

Interest

Leave your nickname here if you are interested in having one made. This is not an order form, but is intended to gauge interest before effort is expended designing the case.

No Nick
1. Tetraden
2. Shadowjack
3. ruskie
4. Micktaiwan