View source for Gsmd

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Return to Gsmd.

Personal tools

gsmd is the GSM daemon running in background of an Openmoko phone, managing the traditional 'phone' parts (voice/sms/gprs communication links) of the phone.

Further technical details and API documentation in progress, is available here.


On the phone

gsmd is usually started as a background daemon when booting by the /etc/init.d/gsmd script, in this case gsmd outputs debug messages to the file "/tmp/gsm.log" (stdout and stderr is redirected there).

For debugging purposes gsmd can be run in foreground mode, options can be queried like:

> gsmd --help
gsmd - (C) 2006 by Harald Welte <>
This program is FREE SOFTWARE under the terms of GNU GPL

        -v      --version       Display program version
        -d      --daemon        Deamonize
        -h      --help          Display this help message
        -p dev  --device dev    Specify serial device to be used
        -s spd  --speed spd     Specify speed in bps (9600,38400,115200,...)
        -F      --hwflow        Hardware Flow Control (RTS/CTS)
        -L      --leak-report   Leak Report of talloc memory allocator
        -l file --logfile file  Specify a logfile to log to

If your GSM modem is attached to ttySAC0 (like in the Neo1973), invoke it as e.g.:

> gsmd -p /dev/ttySAC0 -s 115200 -F

(baud rate seems to be autodetected by the modem)

In order to kill the actual gsmd process and then run gsmd with a separate logfile and in background, but not as daemon:

> kill -SIGTERM `pidof gsmd`

and then to create a logfile with the date in the name

> gsmd -p /dev/ttySAC0 -s 115200 -F -l logs_gsmd-`date +%Y-%m-%d_%Hh%M` &

From host PC

With recent uboot (svn > r2885), the gsm modem can be powered on and connected to uboot's serial console from uboot itself. Thus allowing the host PC to interact directly with the modem. Some notes about getting gsmd running in this manner is here.


libgsmd is a library with C language API for application programs. Programs using this library can use the phone, e.g. make phone calls, receive incoming calls, register to the network, etc.


libgsmd-tool is a small demo application that can be used to demonstrate the usage of the libgsmd API.


libgsmd-tool has multiple modes.

Usage of shell mode

Shell mode provides a simple text-based command interface for making voice calls.

The shell mode can be started using

libgsmd-tool -m shell

It can be used like in the following example:

> src/util/libgsmd-tool -m shell
libgsm-tool - (C) 2006 by Harald Welte
This program is Free Software and has ABSOLUTELY NO WARRANTY

        A       Answer incoming call
        D       Dial outgoing number
        H       Hangup call
        O       Antenna Power On
        o       Antenna Power Off
        gos     Get Antenna Status
        V       Vibrator Enable (CVIB=1)
        v       Vibrator Disable (CVIB=0)
        M       Modem Power On
        m       Modem Power Off
        r       Register to network
        R       Register to given operator (R=number)
        U       Unregister from netowrk
        P       Print current operator
        N       Print current operator in numeric
        L       List available operators
        Q       Read signal quality
        nr      Query network registration
        S       Sleep (S[=second], default 5)
        T       Send DTMF Tone
        n       Print subscriber numbers
        pd      PB Delete (pb=index)
        pr      PB Read (pr=index)
        prr     PB Read Range (prr=index1,index2)
        pf      PB Find (pf=indtext)
        pw      PB Write (pw=index,number,text)
        ps      PB Support
        pm      PB Memory
        pp      PB Set Memory (pp=storage)
        sd      SMS Delete (sd=index,delflg)
        sl      SMS List (sl=stat)
        sr      SMS Read (sr=index)
        ss      SMS Send (ss=ask_ds,number,text|["text"])
        sw      SMS Write (sw=stat,number,text)
        sm      SMS Storage stats
        sM      SMS Set preferred storage (sM=mem1,mem2,mem3)
        sc      SMS Show Service Centre
        sC      SMS Set Service Centre (sC=number)
        gvm     Get Voicemail number
        svm     Set Voicemail number(svm=number)
        im      Get imsi
        mf      Get manufacturer
        ml      Get model
        rv      Get revision
        sn      Get serial number
        cs      Get Call status
        gp      Get PIN status
        cbc     Get Battery status
        Rh      Release all held calls (+CHLD=0)
        UDUB    User Determined User Busy (+CHLD=0)
        Ra      Release all active calls (+CHLD=1)
        Rx      Release specific active call x (Rx=x)(+CHLD=1x)
        Ha      Hold all active calls and accept held or waiting call (+CHLD=2)
        Hx      Hold all active calls except call x (Hx=x)(+CHLD=2x)
        MP      Add a held call to the conversation (+CHLD=3)
        CFD     Disable call forwarding (CFD=reason)
        CFE     Enable call forwarding (CFE=reason)
        CFQ     Query the status of call forwarding (CFQ=reason)
        CFR     Register call forwarding (CFR=reason,number)
        CFe     Erase a record of call forwarding (CFe=reason)
        q       Quit

# EVENT: PIN request (type=1) Please enter PIN: 6582
# EVENT: Netreg searching for network 
EVENT: Netreg registered (home network) 

# Dial 03024033902
EVENT: Call Progress: UNKNOWN
EVENT: Call Progress: PROCEED
EVENT: Call Progress: SYNC
EVENT: Call Progress: ALERT
# Hangup
EVENT: Call Progress: RELEASE

EVENT: Incoming call type=2!
EVENT: Incoming call clip=`"03024033902"'
EVENT: Incoming call type=2!
# Answer
# Hangup

Usage of atcmd mode

The atcmd mode is a passthrough-mode. Passthrough means that it accepts GSM 07.07 commands, passes them through the daemon to the phone, and returns you the response. this is very useful for debugging.

The atcmd mode can be started using

libgsmd-tool -m atcmd

Usage is like in the following example:

> src/util/libgsmd-tool -m atcmd
libgsm-tool - (C) 2006 by Harald Welte
This program is Free Software and has ABSOLUTELY NO WARRANTY

RSTR=`+COPS: (2,"E-Plus","E-Plus","26203"),(3,"o2 - de","o2 - de","26207"),(3,"","Vodafone","26202"),(3,"T-Mobile D","TMO D","26201")'

Network related functions

Operator selection functions were implemented and merged into SVN head[1]:

The new commands in libgsmd-util are as followings:

 R  -  Register to given operator (R=number)
 P  -  Print current operator
 L  -  Detect available operators
 Q  -  Read signal quality

This is implemented by the functions with "_opers_" naming.

Currently missing

(please add items to this list if you're missing more features)

  • Phone related functions
    • Airplane mode / gsmd stop (this will be done outside gsmd, by using runlevels / upstart)
    • Capability to set-up Emergency Calls, even if the device does not hold a SIM card
    • obtain manufacturer/model/revision/IMEI
    • Ability to notify user if the SIM card is locked (or even automagically unlock it?)
  • SMS related features
    • send SMS
    • receive SMS
    • obtain IMSI
    • access to SIM-card stored SMS - No longer missing - see help
  • SIM related functions
    • read phonebook entry - No longer missing - see help
    • write phonebook entry - No longer missing - see help
  • GPRS related functions
    • set up GPRS link, use it via separate DLC of TS07.10 multiplex
  • gsmd internal infrastructure
    • fine-grained event subscriptions (rather than wildcard-subscribe)
    • possibility to specify log-level from command line
    • logfile re-opening on SIGUSR1 or SIGHUP (logrotate)
    • permission handling
    • d-bus interface

Implementation Thoughts

Testing framework

Emulating/mocking the firmware, gsmd and libgsmd can be tested for functionality; on any machine. See Kero's page or go directly to the (lib)gsmd testing page.

State tracking

gsmd needs to do apropriate state tracking of the underlying GSM hardware. For many of the state transition we only get events from the GSM Modem, but don't have apropriate query commands. Thus, assuming gsmd runs all the time, applications can come and go, but still have an idea about the current state of the modem, even if they missed the initial state transitions.

Also, gsmd state tracking allows us to allow for safer interoperability of multiple applications. If i.e. one applications has just started an outgoing call, gsmd can detect another application who intends to interfere with that and deny access

device power state

  • modem completely off, not responding to AT commands
  • modem responding to AT commands, but powered off (CFUN=0)
  • modem responding to AT commands, in some power saving mode
  • modem responding to AT commands, powered on, fully operational (CFUN=1)

Suspend power state

It must also configure the modem so that it can on appropriate events wake the system from sleep.

network registration state

  • not registered to any network, not trying to register
  • not registred to any network, searching/trying to register
  • registered to home network (including cellID)
  • registered to roaming network (including cellID)

ciphering indication state

  • ciphering indications not supported by modem
  • ciphering indications supported, but disabled in SIM
  • ciphering indications supported, ciphering active
  • ciphering indications supported, ciphering inactive

call state

  • idle
  • busy

Sources of gsmd are kept in Openmoko svn in src/target/gsm directory.