Gllin

From Openmoko

(Difference between revisions)
Jump to: navigation, search
Line 68: Line 68:
 
root@fic-gta01:/chroot$ chroot /chroot/ gllin -low 1<br />
 
root@fic-gta01:/chroot$ chroot /chroot/ gllin -low 1<br />
 
root@fic-gta01:/chroot$ chroot /chroot/ gllin -periodic 1<br />
 
root@fic-gta01:/chroot$ chroot /chroot/ gllin -periodic 1<br />
 +
 +
More infos and tricks are here: [[Manually_using_GPS]].

Revision as of 01:28, 25 November 2007

gllin is an userpsace driver for a hammerhead chip. It was distributed on phase1 openmokos.

Unfortunately, it is an OABI binary, and not even static one, so lots of stuff is needed for it to work. For security reasons, and for compatibility with EABI userland, it is probably best to run it in chroot. Zdanek's wrote an article how to put that together.

The changeroot trick

Your chroot will need to contain following files:

./dev
./dev/zero
./dev/ttySAC1
./etc
./etc/hosts
./etc/nsswitch.conf
./etc/host.conf
./lib
./lib/libm.so.6
./lib/libpthread-2.5.so
./lib/libnss_files.so.2
./lib/libnss_compat-2.5.so
./lib/libnss_mdns6_minimal.so.2
./lib/libanl-2.5.so
./lib/libgcc_s.so.1
./lib/libutil-2.5.so
./lib/libmemusage.so
./lib/libm-2.5.so
./lib/libc-2.5.so
./lib/libnss_mdns_minimal.so.2
./lib/libBrokenLocale.so.1
./lib/libnss_mdns4_minimal.so.2
./lib/libpthread.so.0
./lib/librt-2.5.so
./lib/libdl-2.5.so
./lib/libutil.so.1
./lib/libthread_db-1.0.so
./lib/libcrypt-2.5.so
./lib/libnss_compat.so.2
./lib/libnss_mdns4.so.2
./lib/libnss_mdns6.so.2
./lib/ld-2.5.so
./lib/libcidn.so.1
./lib/libthread_db.so.1
./lib/libnss_files-2.5.so
./lib/libanl.so.1
./lib/libcrypt.so.1
./lib/libnss_dns-2.5.so
./lib/ld-linux.so.2
./lib/libnss_mdns.so.2
./lib/libdl.so.2
./lib/libnss_dns.so.2
./lib/libc.so.6
./lib/librt.so.1
./lib/libcidn-2.5.so
./lib/libBrokenLocale-2.5.so
./log
./tmp
./tmp/nmeaNP
./usr
./usr/lib
./usr/lib/libstdc++.so.6
./usr/lib/libstdc++.so.6.0.8
./gllin
./sys

...and you"ll want to mount /sys there. Then, to get gps to work, do:

root@fic-gta01:/chroot$ cat /chroot/tmp/nmeaNP &
root@fic-gta01:/chroot$ chroot /chroot/ gllin -low 1
root@fic-gta01:/chroot$ chroot /chroot/ gllin -periodic 1

More infos and tricks are here: Manually_using_GPS.

Personal tools

gllin is an userpsace driver for a hammerhead chip. It was distributed on phase1 openmokos.

Unfortunately, it is an OABI binary, and not even static one, so lots of stuff is needed for it to work. For security reasons, and for compatibility with EABI userland, it is probably best to run it in chroot. Zdanek's wrote an article how to put that together.

The changeroot trick

Your chroot will need to contain following files:

./dev
./dev/zero
./dev/ttySAC1
./etc
./etc/hosts
./etc/nsswitch.conf
./etc/host.conf
./lib
./lib/libm.so.6
./lib/libpthread-2.5.so
./lib/libnss_files.so.2
./lib/libnss_compat-2.5.so
./lib/libnss_mdns6_minimal.so.2
./lib/libanl-2.5.so
./lib/libgcc_s.so.1
./lib/libutil-2.5.so
./lib/libmemusage.so
./lib/libm-2.5.so
./lib/libc-2.5.so
./lib/libnss_mdns_minimal.so.2
./lib/libBrokenLocale.so.1
./lib/libnss_mdns4_minimal.so.2
./lib/libpthread.so.0
./lib/librt-2.5.so
./lib/libdl-2.5.so
./lib/libutil.so.1
./lib/libthread_db-1.0.so
./lib/libcrypt-2.5.so
./lib/libnss_compat.so.2
./lib/libnss_mdns4.so.2
./lib/libnss_mdns6.so.2
./lib/ld-2.5.so
./lib/libcidn.so.1
./lib/libthread_db.so.1
./lib/libnss_files-2.5.so
./lib/libanl.so.1
./lib/libcrypt.so.1
./lib/libnss_dns-2.5.so
./lib/ld-linux.so.2
./lib/libnss_mdns.so.2
./lib/libdl.so.2
./lib/libnss_dns.so.2
./lib/libc.so.6
./lib/librt.so.1
./lib/libcidn-2.5.so
./lib/libBrokenLocale-2.5.so
./log
./tmp
./tmp/nmeaNP
./usr
./usr/lib
./usr/lib/libstdc++.so.6
./usr/lib/libstdc++.so.6.0.8
./gllin
./sys

...and you"ll want to mount /sys there. Then, to get gps to work, do:

root@fic-gta01:/chroot$ cat /chroot/tmp/nmeaNP &
root@fic-gta01:/chroot$ chroot /chroot/ gllin -low 1
root@fic-gta01:/chroot$ chroot /chroot/ gllin -periodic 1