Getting Started with your Neo FreeRunner

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m (Step1. Download DFU-util: Added change the rights of dfu-util)
m (Step 2. Flashing Kernel)
Line 144: Line 144:
 
http://downloads.openmoko.org/releases/Freerunner/
 
http://downloads.openmoko.org/releases/Freerunner/
  
Type in the following command in the terminal of a GNU/Linux host.
+
Type in the following command in the terminal of a GNU/Linux host. On some systems you need to be root.
 
  ./dfu-util -a (partion name) -R -D (download image file name)
 
  ./dfu-util -a (partion name) -R -D (download image file name)
  

Revision as of 01:12, 6 July 2008


Thank you for purchasing this Developer release of Neo FreeRunner. The Neo FreeRunner phone is the second hardware platform to take advantage of Openmoko. This guide will help you get to know your Neo FreeRunner and how to start using your Neo FreeRunner.

Neo FreeRunner Package

Contents

What Is In The Box

Inside package
Circle2.gif Neo FreeRunner
Circle2.gif Stylus
Circle2.gif Battery
Circle2.gif Charger
Circle2.gif USB Cable
Circle2.gif microSD Card 512MB

Getting To Know Neo FreeRunner

AUX Button and phone jack(From left to right)
Power Button, USB and external GPS Antenna (From left to right)
AUX Back side with battery
Put the SIM card and SD card here
open case from this side
Opened

Turning On Neo FreeRunner

You can boot your Neo FreeRunner in following ways:

Circle2.gif You can power up into an Openmoko image directly.
Circle2.gif Boot into U-Boot via NAND Flash.
Circle2.gif Boot into U-Boot via NOR Flash.

These ways allows you to update the kernel and root filesystem.

Start the Openmoko Image

Menu2.jpg

Press and hold Power button (about 8 seconds) until Openmoko splash screen turns up. You may now release the Power button, and Neo FreeRunner will continue to boot into the Openmoko Image.

Log into U-Boot in NAND Flash

Menu7.jpg

Press and hold Power button, then press and hold AUX button (about 5~8 seconds ). You can see BOOT MENU for NAND Flash. Press AUX to select the options, Power to execute.

Log into U-Boot in NOR Flash

Menu6.jpg

Press and hold AUX button, then press and hold Power button. Release AUX button. You can see BOOT MENU for NOR Flash. (This option is usually used by developers or when flashing the FreeRunner. Also, if you can't log into U-Boot in NAND, then you can log into U-Boot in NOR Flash.)

NOTE: There are six options you can choose when you log into NOR Flash.

1. Boot

2. Boot from MicroSD

3. Set console to USB

4. Set console to Serial

5. Reset

6. Power off



Flashing Neo FreeRunner

As Openmoko development continues, Openmoko regularly releases updated versions of the Openmoko root filesystem, the kernel, and the U-Boot. These may be programmed into the Flash memory of Neo FreeRunner. You can use the USB cable and Openmoko provided tool to flash Neo FreeRunner.

NOTE: The Openmoko software team builds images daily. If you want to use the latest images, you can download the image from the daily build, but we recommend you download the most stable image from http://downloads.openmoko.org/releases/Freerunner/. Images here have been tested by the test team.


Step1. Download DFU-util

You can download the flashing tool from: http://downloads.openmoko.org/releases/Freerunner/dfu-util

On the GNU/Linux host, you you can use following command to download dfu-util:

wget http://downloads.openmoko.org/releases/Freerunner/dfu-util

Afterwards you have to change the rights:

chmod a+x dfu-util

Step 2. Flashing Kernel

You can download the kernel from http://downloads.openmoko.org/releases/Freerunner/

Type in the following command in the terminal of a GNU/Linux host. On some systems you need to be root.

./dfu-util -a (partion name) -R -D (download image file name)


ex:

./dfu-util -a kernel -R -D uImage-2.6.24+svnr4082-r4055-r3-neo1973.bin
Log into U-Boot in NOR Flash, connect your Neo with Linux Host via USB cable

Before you execute the command , please log into U-Boot in NOR Flash. Neo FreeRunner needs to boot into U-Boot when flashing.

Then connect your Neo with Linux Host via USB cable. Press Enter to execute the command. When flashing succeeds

status(0) = No error condition is present
Done!

NOTE: The meaning of parameter you spcified:

-a --alt alt Specify the altsetting of the DFU interface by name or by number
-R --reset Issue USB Reset signalling once we're finished
-D --download file Write firmware from<file> into device


Step 3. Flashing Root Filesystem

You can download the root filesystem from : http://downloads.openmoko.org/releases/Freerunner/

Type in the following command in the terminal of a GNU/Linux host.

./dfu-util -a rootfs -R -D openmoko-devel-image-fic-gta02.jffs2

When flashing succeeds

status(0) = No error condition is present
Done!

Connect To Neo FreeRunner By USB Networking

Connect Neo FreeRunner to Linux host with USB cable. For OS X please refer to MacOS_X. After booting into Openmoko image, there will be a new interface, usb0, in your Linux host.

Manual Method

Type in the following command in the terminal of a GNU/Linux host.

ifconfig usb0 192.168.0.200 netmask 255.255.255.0
ssh root@192.168.0.202

Press Enter to pass the password.

Automatic Method
  • Debian and derivatives (Ubuntu, Sidux etc.)

Edit /etc/network/interfaces

auto usb0
iface usb0 inet static
address 192.168.0.200
netmask 255.255.255.0
  • Gentoo

Edit /etc/conf.d/net

config_usb0="192.168.0.200/24"

Restart the networking service and type in the following command in the terminal of GNU/Linux host.

ssh root@192.168.0.202

Press Enter to pass the password.

Making things even more automatic

If you don't want to remember the IP number of your phone you can create an alias by adding the following line to your /etc/hosts:

192.168.0.202   openmoko

Now it should immediately be possible to connect your phone using the following command line:

ssh root@openmoko

Appendix

If you want to know more about FreeRunner, you can get more information in following topics:

Views
Personal tools


Thank you for purchasing this Developer release of Neo FreeRunner. The Neo FreeRunner phone is the second hardware platform to take advantage of Openmoko. This guide will help you get to know your Neo FreeRunner and how to start using your Neo FreeRunner.

Neo FreeRunner Package

What Is In The Box

Inside package
Circle2.gif Neo FreeRunner
Circle2.gif Stylus
Circle2.gif Battery
Circle2.gif Charger
Circle2.gif USB Cable
Circle2.gif microSD Card 512MB

Getting To Know Neo FreeRunner

AUX Button and phone jack(From left to right)
Power Button, USB and external GPS Antenna (From left to right)
AUX Back side with battery
Put the SIM card and SD card here
open case from this side
Opened

Turning On Neo FreeRunner

You can boot your Neo FreeRunner in following ways:

Circle2.gif You can power up into an Openmoko image directly.
Circle2.gif Boot into U-Boot via NAND Flash.
Circle2.gif Boot into U-Boot via NOR Flash.

These ways allows you to update the kernel and root filesystem.

Start the Openmoko Image

Menu2.jpg

Press and hold Power button (about 8 seconds) until Openmoko splash screen turns up. You may now release the Power button, and Neo FreeRunner will continue to boot into the Openmoko Image.

Log into U-Boot in NAND Flash

Menu7.jpg

Press and hold Power button, then press and hold AUX button (about 5~8 seconds ). You can see BOOT MENU for NAND Flash. Press AUX to select the options, Power to execute.

Log into U-Boot in NOR Flash

Menu6.jpg

Press and hold AUX button, then press and hold Power button. Release AUX button. You can see BOOT MENU for NOR Flash. (This option is usually used by developers or when flashing the FreeRunner. Also, if you can't log into U-Boot in NAND, then you can log into U-Boot in NOR Flash.)

NOTE: There are six options you can choose when you log into NOR Flash.

1. Boot

2. Boot from MicroSD

3. Set console to USB

4. Set console to Serial

5. Reset

6. Power off



Flashing Neo FreeRunner

As Openmoko development continues, Openmoko regularly releases updated versions of the Openmoko root filesystem, the kernel, and the U-Boot. These may be programmed into the Flash memory of Neo FreeRunner. You can use the USB cable and Openmoko provided tool to flash Neo FreeRunner.

NOTE: The Openmoko software team builds images daily. If you want to use the latest images, you can download the image from the daily build, but we recommend you download the most stable image from http://downloads.openmoko.org/releases/Freerunner/. Images here have been tested by the test team.


Step1. Download DFU-util

You can download the flashing tool from: http://downloads.openmoko.org/releases/Freerunner/dfu-util

On the GNU/Linux host, you you can use following command to download dfu-util:

wget http://downloads.openmoko.org/releases/Freerunner/dfu-util

Afterwards you have to change the rights:

chmod a+x dfu-util

Step 2. Flashing Kernel

You can download the kernel from http://downloads.openmoko.org/releases/Freerunner/

Type in the following command in the terminal of a GNU/Linux host. On some systems you need to be root.

./dfu-util -a (partion name) -R -D (download image file name)


ex:

./dfu-util -a kernel -R -D uImage-2.6.24+svnr4082-r4055-r3-neo1973.bin
Log into U-Boot in NOR Flash, connect your Neo with Linux Host via USB cable

Before you execute the command , please log into U-Boot in NOR Flash. Neo FreeRunner needs to boot into U-Boot when flashing.

Then connect your Neo with Linux Host via USB cable. Press Enter to execute the command. When flashing succeeds

status(0) = No error condition is present
Done!

NOTE: The meaning of parameter you spcified:

-a --alt alt Specify the altsetting of the DFU interface by name or by number
-R --reset Issue USB Reset signalling once we're finished
-D --download file Write firmware from<file> into device


Step 3. Flashing Root Filesystem

You can download the root filesystem from : http://downloads.openmoko.org/releases/Freerunner/

Type in the following command in the terminal of a GNU/Linux host.

./dfu-util -a rootfs -R -D openmoko-devel-image-fic-gta02.jffs2

When flashing succeeds

status(0) = No error condition is present
Done!

Connect To Neo FreeRunner By USB Networking

Connect Neo FreeRunner to Linux host with USB cable. For OS X please refer to MacOS_X. After booting into Openmoko image, there will be a new interface, usb0, in your Linux host.

Manual Method

Type in the following command in the terminal of a GNU/Linux host.

ifconfig usb0 192.168.0.200 netmask 255.255.255.0
ssh root@192.168.0.202

Press Enter to pass the password.

Automatic Method

Edit /etc/network/interfaces

auto usb0
iface usb0 inet static
address 192.168.0.200
netmask 255.255.255.0

Edit /etc/conf.d/net

config_usb0="192.168.0.200/24"

Restart the networking service and type in the following command in the terminal of GNU/Linux host.

ssh root@192.168.0.202

Press Enter to pass the password.

Making things even more automatic

If you don't want to remember the IP number of your phone you can create an alias by adding the following line to your /etc/hosts:

192.168.0.202   openmoko

Now it should immediately be possible to connect your phone using the following command line:

ssh root@openmoko

Appendix

If you want to know more about FreeRunner, you can get more information in following topics:

Tools