GSM oscillating between registered and not registered aka 1024
m (→Hardware bug fixing)
|Line 69:||Line 69:|
==Hardware bug fixing==
==Hardware bug fixing==
To perform the hardware update, please check description here: http://www.neofundas.blogspot.com/
To perform the hardware update, please check description here:
Revision as of 18:46, 27 January 2010
Hardware bug #1024 creates a condition when the gsm modem is oscillating between registrated / not-registrated. This causes the phone to be unavailable at times. Distribution maintainers have been able to use a software setting to disable suspend of the gsm modem in order to work around this bug. The downside is that with this workaround the modem never sleeps and consumer more energy then needed.
If you decide to undergo a hardware fix of your phone you have to reconfigure your distribution to allow the gsm modem to go to sleep again in order to actually make use of the modem sleep function and therefore extend your battery life.
Not every Freerunner suffers this issue. To check if your phone has the bug #1024 please use this test script:
(This script will only work on FSO based distro. Also, this script is not 100% perfect, another way is to use frameworkd with ti_calypso_sleep_mode = 'adaptive' and inspect the logs. Frameworkd will tell you, when a real recamping exists)
#!/usr/bin/python import dbus import dbus.glib import gobject import datetime def onNetworkStatus(status ): print '[%s] Signal : cid=%s, lac=%s' % (datetime.datetime.now(),status['cid'],status['lac'] ) bus = dbus.SystemBus(); bus.add_signal_receiver( onNetworkStatus, "Status", "org.freesmartphone.GSM.Network", "org.freesmartphone.ogsmd", "/org/freesmartphone/GSM/Device" ) gobject.threads_init() dbus.glib.init_threads() main_loop = gobject.MainLoop() main_loop.run()
Run it like this:
root@om-gta02 ~ $ deep-sleep-check.py > dsc.log
If you have something like this:
[2009-09-09 12:36:09.189663] Signal : cid=3BB3, lac=0D48 [2009-09-09 12:36:15.088936] Signal : cid=3BB3, lac=0D48 [2009-09-09 12:38:10.442808] Signal : cid=3BB3, lac=0D48 [2009-09-09 12:38:13.020126] Signal : cid=3BB3, lac=0D48 [2009-09-09 12:40:25.772918] Signal : cid=3BB3, lac=0D48 [2009-09-09 12:40:28.620096] Signal : cid=3BB3, lac=0D48 [2009-09-09 12:41:17.557676] Signal : cid=3BB3, lac=0D48 [2009-09-09 12:41:20.404582] Signal : cid=3BB3, lac=0D48
Then you have the bug (trying to connect to GSM every second). Please note that cid is always the same.
Correct output might not show any messages or look like this:
[2009-10-18 07:51:27.107655] Signal : cid=4E91, lac=006A [2009-10-18 07:52:45.145288] Signal : cid=4E7B, lac=006A [2009-10-18 07:53:18.218122] Signal : cid=4E91, lac=006A
You can see the cid changing.
Bug detection by fso
Just use frameworkd with ti_calypso_sleep_mode = 'adaptive' and inspect the logs. Frameworkd will tell you, when a real recamping exists.
Hardware bug fixing
To perform the hardware update, please check description here: http://lists.openmoko.org/pipermail/hardware/2009-May/001192.html http://www.neofundas.blogspot.com/
After the fix, please recheck again with the script as above. Under normal circumstances you would only see these messages with a change of cell, so cid would be different.
If your fix was successful you can change setting to allow Calypso deep sleep:
Enabling/allowing Calypso GSM modem deep sleep
FSO based distros (SHR, Debian, OM2009...)
Edit /etc/frameworkd.conf , it should contain:
ti_calypso_deep_sleep = always
Then restart framework or reboot the phone.
QT based distos (Qtopia, QTExtended, QTMoko...)
Edit /opt/qtmoko/etc/default/Trolltech/Modem.conf , it should contain:
As said in http://lists.hackable1.org/pipermail/hackable1-user/2010-January/000718.html and other discussions: hackable:1 does not use frameworkd but gsmd.
To enable deep-sleep mode:
-download and install (or extract)
-edit /etc/default/gsmd and uncomment the "VENDOR=ti-deepsleep" line: this will add a
"-v ti-deepsleep" to the deamon command line.
Currently Android on Freerunner is hard coded to use AT%SLEEP=2 to avoid deep sleep mode entirely; there is a discussion about providing editable property in Androids init.rc startup file.