GSM

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Applications)
m
Line 7: Line 7:
 
== Applications ==
 
== Applications ==
  
Calls can be placed using the graphical [[Dialer]] or the textual [[libgsmd-tool]].
+
Calls can be placed using the graphical [[Dialer]] or the textual [[http://wiki.openmoko.org/wiki/Gsmd#libgsmd-tool|libgsmd-tool]].
  
 
Rest needs to be done on the command-line [[manually using GSM]] and [[manually using GPRS]], until [[gsmd]] supports more.
 
Rest needs to be done on the command-line [[manually using GSM]] and [[manually using GPRS]], until [[gsmd]] supports more.

Revision as of 16:10, 18 October 2007

GSM, (Global System for Mobile communications) is the phone standard and network type supported by the Neo1973. Future phones may support other standards.

GSM covers making phone calls, sending SMS text messages, and access to Internet via GPRS. A SIM (Subscriber Identity Module) card is given along the contract with an operator, and the customer inserts the card in the phone to authorize it for use other than emergency dialling. The card is plastic (approximately 15mm*23mm*1mm) with 8 electrical contacts on. It's main purpose is identifying for the phone, the relationship between the contractor and the operator. This includes information about the mobile phone number, the home network, sms center phone number etc. The user (i.e. phone) usually has some amount of storage available on the card for a simple phonebook. SIM cards are standard ISO/IEC 7816 smart cards with a special SIM application on it.

The Neo1973 phone should work with any operator that has a GSM network (see Neo1973 compatible cellphone providers); it is quad-band and thus supports every frequency (850, 900, 1800, and 1900 MHz). Thus it will work in most countries, with the exception of some of the US and some other parts of the world that completely lack GSM coverage.

Contents

Applications

Calls can be placed using the graphical Dialer or the textual [[1]].

Rest needs to be done on the command-line manually using GSM and manually using GPRS, until gsmd supports more.

Programming

The GSM features (including dialing, SMS, GPRS, and SIM access) will be programmed via gsmd.

Standards information

You can find a full list of GSM/3GPP standards at this ETSI site (attention! more than 2000 entries) or at the light-weight ETSI site.

GSM 02.07 - Required features

See GSM02.07.

GSM 07.07 - Main AT commands

07.07 describes the main commands used by the Gsmd software of the Openmoko system to communicate via a serial interface with the GSM subsystem of the phone.

For more, see Hardware:AT Commands.

Note that the descendant of this specification is 3GPP TS 27.007 - AT command set for User Equipment (UE). (Does OpenMoko support any of these newer versions?)

GSM 07.05 - Additional AT commands (SMS and CBS)

A more user-friendly resource is:

GSM 07.10 - Multiplexing

Personal tools

GSM, (Global System for Mobile communications) is the phone standard and network type supported by the Neo1973. Future phones may support other standards.

GSM covers making phone calls, sending SMS text messages, and access to Internet via GPRS. A SIM (Subscriber Identity Module) card is given along the contract with an operator, and the customer inserts the card in the phone to authorize it for use other than emergency dialling. The card is plastic (approximately 15mm*23mm*1mm) with 8 electrical contacts on. It's main purpose is identifying for the phone, the relationship between the contractor and the operator. This includes information about the mobile phone number, the home network, sms center phone number etc. The user (i.e. phone) usually has some amount of storage available on the card for a simple phonebook. SIM cards are standard ISO/IEC 7816 smart cards with a special SIM application on it.

The Neo1973 phone should work with any operator that has a GSM network (see Neo1973 compatible cellphone providers); it is quad-band and thus supports every frequency (850, 900, 1800, and 1900 MHz). Thus it will work in most countries, with the exception of some of the US and some other parts of the world that completely lack GSM coverage.

Applications

Calls can be placed using the graphical Dialer or the textual libgsmd-tool.

Rest needs to be done on the command-line manually using GSM and manually using GPRS, until gsmd supports more.

Programming

The GSM features (including dialing, SMS, GPRS, and SIM access) will be programmed via gsmd.

Standards information

You can find a full list of GSM/3GPP standards at this ETSI site (attention! more than 2000 entries) or at the light-weight ETSI site.

GSM 02.07 - Required features

See GSM02.07.

GSM 07.07 - Main AT commands

07.07 describes the main commands used by the Gsmd software of the Openmoko system to communicate via a serial interface with the GSM subsystem of the phone.

For more, see Hardware:AT Commands.

Note that the descendant of this specification is 3GPP TS 27.007 - AT command set for User Equipment (UE). (Does OpenMoko support any of these newer versions?)

GSM 07.05 - Additional AT commands (SMS and CBS)

A more user-friendly resource is:

GSM 07.10 - Multiplexing