GPS Sight

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Inside the project)
Line 16: Line 16:
 
== Inside the project ==
 
== Inside the project ==
 
The most interesting part of this project was to keep the external driver thread and GUI thread sufficiently happy together. We cannot just read from the pipe in a loop as this blocks the GUI repainting! Instead, the code schedules the GTK timer, and then it needs to check if any input from the pipe is available - again, without blocking the current thread for too long. This is done using select function which can check the given stream for the availability of input, passing the certain time-out duration. This time-out seems also tricky: if the value or 0.1 s or less is passed on the Neo, function never reports any input present. However too large values block GUI in the input check step. The code now has a kind of adaptation, gradually increasing the duration of this check if there is no input available for a while.
 
The most interesting part of this project was to keep the external driver thread and GUI thread sufficiently happy together. We cannot just read from the pipe in a loop as this blocks the GUI repainting! Instead, the code schedules the GTK timer, and then it needs to check if any input from the pipe is available - again, without blocking the current thread for too long. This is done using select function which can check the given stream for the availability of input, passing the certain time-out duration. This time-out seems also tricky: if the value or 0.1 s or less is passed on the Neo, function never reports any input present. However too large values block GUI in the input check step. The code now has a kind of adaptation, gradually increasing the duration of this check if there is no input available for a while.
 +
 +
The distance counter tries to track the curved distance, not the "bird flight" distance between two points. It adds the shifts in space, computing the length of the lat/long degrees into meters in accordance to the IERS 2003 goedetic reference - very new and not yet widely used in geography.
  
 
The distance counter may have its own problems, adding minor random changes of the reported location just due measurement error. The algorithm accepts these errors as an actual "walking step back and forward", so the distance counter may slowly go up while standing in place. This, however, should only be noticeable during slow walking - cycling is already fast enough to make this problem minor.
 
The distance counter may have its own problems, adding minor random changes of the reported location just due measurement error. The algorithm accepts these errors as an actual "walking step back and forward", so the distance counter may slowly go up while standing in place. This, however, should only be noticeable during slow walking - cycling is already fast enough to make this problem minor.
 
== Testing ==
 
The distance counter tries to track the curved distance, not the "bird flight" distance between two points. It adds the shifts in space, computing the length of the lat/long degrees into meters in accordance to the IERS 2003 goedetic reference. Nobody yet tested, how accurate it is (please update this information if you ever tried).
 
  
 
== Dependencies ==
 
== Dependencies ==
 
The GPS Preview program (gpv) is released either in .ipk file or in the form of the source code. The released installer still needs the gllin to run, but, if needed, can start it itself.
 
The GPS Preview program (gpv) is released either in .ipk file or in the form of the source code. The released installer still needs the gllin to run, but, if needed, can start it itself.
 
== Testing the device ==
 
== Testing the device ==
The device has been tested outdoors where it shows the correct location and altitude. The speed indicator has been tested on the train, correctly showing the speed of about km/h. It is not yet clear if the distance counter works as expected.
+
The device has been tested outdoors where it shows the correct location and altitude. The speed indicator has been tested on the train, correctly showing the speed of about 100 km/h.  
 +
 
 +
Nobody yet tested, how accurate it is (please update this information if you ever tried).
 +
 
  
 
[[Category:GPS]]
 
[[Category:GPS]]

Revision as of 19:47, 26 January 2008

File:Gpv 0 0 screen shot.png
The program, running on the mobile phone, but visible on a desktop machine via X. As GPS does not work indoors, only the time field shows the value

The GPS preview is a GTK based project to create a usable GUI tool with the simple output (no maps). It is built and tested around the gllin driver but should work with any other driver via pipe at /tmp/nmeaNP. It detects GPRMC and GPGGA messages and constantly shows the following data on the screen:

  • Location.
  • Speed in kilometers per hour (converts from knots).
  • Altitude
  • Curved distance from the initially marked point (uses advanced IERC 2003 geodetic reference to convert degrees into kilometers).
  • Number of the satellites.
  • Time (UTM, not a local time).

The source code of this project is available in the project page (http://projects.openmoko.org/projects/gpv/), under LGPL. The project uses GTK framework and C programming language.

Contents

The project organization

The project releases the ready to run .ipk files and the packed plain source files (without the build environment). The build environment (as well as the newest version of the source code) can be checked from CVS (the only module is gpv): the anonymous access is open. The build environment is not included in each source distribution as it tends to grow above the currently set 3 Mb limit.

Inside the project

The most interesting part of this project was to keep the external driver thread and GUI thread sufficiently happy together. We cannot just read from the pipe in a loop as this blocks the GUI repainting! Instead, the code schedules the GTK timer, and then it needs to check if any input from the pipe is available - again, without blocking the current thread for too long. This is done using select function which can check the given stream for the availability of input, passing the certain time-out duration. This time-out seems also tricky: if the value or 0.1 s or less is passed on the Neo, function never reports any input present. However too large values block GUI in the input check step. The code now has a kind of adaptation, gradually increasing the duration of this check if there is no input available for a while.

The distance counter tries to track the curved distance, not the "bird flight" distance between two points. It adds the shifts in space, computing the length of the lat/long degrees into meters in accordance to the IERS 2003 goedetic reference - very new and not yet widely used in geography.

The distance counter may have its own problems, adding minor random changes of the reported location just due measurement error. The algorithm accepts these errors as an actual "walking step back and forward", so the distance counter may slowly go up while standing in place. This, however, should only be noticeable during slow walking - cycling is already fast enough to make this problem minor.

Dependencies

The GPS Preview program (gpv) is released either in .ipk file or in the form of the source code. The released installer still needs the gllin to run, but, if needed, can start it itself.

Testing the device

The device has been tested outdoors where it shows the correct location and altitude. The speed indicator has been tested on the train, correctly showing the speed of about 100 km/h.

Nobody yet tested, how accurate it is (please update this information if you ever tried).

Personal tools
File:Gpv 0 0 screen shot.png
The program, running on the mobile phone, but visible on a desktop machine via X. As GPS does not work indoors, only the time field shows the value

The GPS preview is a GTK based project to create a usable GUI tool with the simple output (no maps). It is built and tested around the gllin driver but should work with any other driver via pipe at /tmp/nmeaNP. It detects GPRMC and GPGGA messages and constantly shows the following data on the screen:

  • Location.
  • Speed in kilometers per hour (converts from knots).
  • Altitude
  • Curved distance from the initially marked point (uses advanced IERC 2003 geodetic reference to convert degrees into kilometers).
  • Number of the satellites.
  • Time (UTM, not a local time).

The source code of this project is available in the project page (http://projects.openmoko.org/projects/gpv/), under LGPL. The project uses GTK framework and C programming language.

The project organization

The project releases the ready to run .ipk files and the packed plain source files (without the build environment). The build environment (as well as the newest version of the source code) can be checked from CVS (the only module is gpv): the anonymous access is open. The build environment is not included in each source distribution as it tends to grow above the currently set 3 Mb limit.

Inside the project

The most interesting part of this project was to keep the external driver thread and GUI thread sufficiently happy together. We cannot just read from the pipe in a loop as this blocks the GUI repainting! Instead, the code schedules the GTK timer, and then it needs to check if any input from the pipe is available - again, without blocking the current thread for too long. This is done using select function which can check the given stream for the availability of input, passing the certain time-out duration. This time-out seems also tricky: if the value or 0.1 s or less is passed on the Neo, function never reports any input present. However too large values block GUI in the input check step. The code now has a kind of adaptation, gradually increasing the duration of this check if there is no input available for a while.

The distance counter may have its own problems, adding minor random changes of the reported location just due measurement error. The algorithm accepts these errors as an actual "walking step back and forward", so the distance counter may slowly go up while standing in place. This, however, should only be noticeable during slow walking - cycling is already fast enough to make this problem minor.

Testing

The distance counter tries to track the curved distance, not the "bird flight" distance between two points. It adds the shifts in space, computing the length of the lat/long degrees into meters in accordance to the IERS 2003 goedetic reference. Nobody yet tested, how accurate it is (please update this information if you ever tried).

Dependencies

The GPS Preview program (gpv) is released either in .ipk file or in the form of the source code. The released installer still needs the gllin to run, but, if needed, can start it itself.

Testing the device

The device has been tested outdoors where it shows the correct location and altitude. The speed indicator has been tested on the train, correctly showing the speed of about km/h. It is not yet clear if the distance counter works as expected.