This page documents the GSM networking solutions (commonly known as GPRS) using the FreeSmartphone.Org framework (FSO).
Since milestone 2 the system dbus has been extended with methods that enables connectivity using GPRS. The functionality is available under
The implementation should not interfer with other phone functionality, such as placing calls. In other words: you can use GPRS while talking on the phone without hanging up.
Currently, there's no GUI available but it's fairly easy to use the methods available using any dbus tool.
Until there's a GUI
While we wait for the preferences part of FSO to be completed (and a GUI), we can use two shell scripts. You need to know three things to successfully connect via GPRS (your carrier should provide this information to you):
- the APN to use,
- the username, and
- the password.
To connect, put the following in a file and make it executable (
chmod +x gprs-on.sh):
#!/bin/sh APN="internet.parlino.se" USERNAME="x" PASSWORD="x" BUSNAME="org.freesmartphone.frameworkd" OBJECTPATH="/org/freesmartphone/GSM/Device" METHODNAME="org.freesmartphone.GSM.PDP.ActivateContext" mdbus -s $BUSNAME $OBJECTPATH $METHODNAME $APN $USERNAME $PASSWORD
To disconnect, use the following method instead (
chmod +x gprs-off.sh):
#!/bin/sh BUSNAME="org.freesmartphone.frameworkd" OBJECTPATH="/org/freesmartphone/GSM/Device" METHODNAME="org.freesmartphone.GSM.PDP.DeactivateContext" mdbus -s $BUSNAME $OBJECTPATH $METHODNAME
The on script, using the ActivateContext method, will:
- setup a ppp interface (normally ppp0) (and assign IP address)
- sutup (replace) the default route
- setup DNS
with settings received from the ISP.
For a list of known APN:s, see the main GPRS page.