View source for FreeRunner GPS antenna repair SOP

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Return to FreeRunner GPS antenna repair SOP.

Personal tools

This will probably void any warranty. Make sure of this before attempting.

WARNING - Only attempt this repair if you are sure it will correct a GPS problem. WARNING - Do not use arcing cold heat soldering tools as the high current could damage sensitive electronics.

1. GPS Antenna CON(CON7601),there are bad soldering issues with this PIN.

PICT1311.JPG

2. Need to re-solder PIN to improve connection.

PICT1310.JPG


3. There are deformities in the internal GPS connector.

PICT1312.JPG

4. Use tweezers to pinch the antenna back to original form.

PICT1313.JPG

5. Now try re-connecting the antenna. The antenna should ‘snap’ into place of the connector locking itself firmly. If it is loose and does not snap, it is possible there will be quality issues.

Gps.JPG