View source for Flashing the GSM Firmware

Views

Personal tools

Introduction

This is a step-by-step description of how the firmware is upgraded on a GTA02 with FLUID running on the device. Note that this process tolerates almost no variations. Stray from the instructions at your own peril. Instructions based on a posting by Werner (http://lists.openmoko.org/pipermail/openmoko-devel/2008-April/002605.html), thanks.

Please note: Update to MOKO9-beta firmware isn't recommended by OM, and probably won't fix any recent issues like #1024 et al.

Warning: there are chances to _completely_ brick your GSM modem on messing around with FLUID!

It's not even clear and yet to test if you might null your IMEI and thus brick the device, by correctly using FLUID in the way described herein

Phase 1: Preparations

• Download and install a distribution to your device that gives you SSH access. We recommend the fso-console image:

mickey@amethyst$ cd /tmp
mickey@amethyst$ wget http://people.openmoko.org/mickey/images/openmoko-fso-console-image-glibc-ipk--20081028-om-gta02.rootfs.jffs2.summary
mickey@amethyst$ dfu-util -a rootfs -R -D ./openmoko-fso-console-image-glibc-ipk--20081028-om-gta02.rootfs.jffs2.summary
mickey@amethyst$ wget http://people.openmoko.org/mickey/images/uImage-2.6.24+r10+gitr75999+54524f4531c8b262431b794fea610d81bb351c86-r10-om-gta02.bin
mickey@amethyst$ dfu-util -a kernel -R -D ./uImage-2.6.24+r10+gitr75999+54524f4531c8b262431b794fea610d81bb351c86-r10-om-gta02.bin

• Install http://people.openmoko.org/joerg/calypso_moko_FW/fluid_0.0+svn20070817-r2_armv4t_eabi.ipk on your device:

root@om-gta02:~# opkg install http://people.openmoko.org/joerg/calypso_moko_FW/fluid_0.0+svn20070817-r2_armv4t_eabi.ipk

• Install http://people.openmoko.org/joerg/calypso_moko_FW/s3c24xx-gpio_1.0+svnr4130-r2.1_armv4t.ipk on your device:

root@om-gta02:~# opkg install http://people.openmoko.org/joerg/calypso_moko_FW/s3c24xx-gpio_1.0+svnr4130-r2.1_armv4t.ipk

• Download http://people.openmoko.org/joerg/calypso_moko_FW/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko9-beta1.m0 and place it into the /home/root directory:

root@om-gta02:~# cd $HOME
root@om-gta02:~# wget http://people.openmoko.org/joerg/calypso_moko_FW/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko9-beta1.m0

Phase 2: The Lobotomy

• Make sure nothing is accessing the GSM modem. If you're using the fso-console image from the link above, this will happen automagically on boot. On other systems, kill processes as you see fit.

• Powercycle the modem:

root@om-gta02:~# echo 0 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on
root@om-gta02:~# echo 1 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on
root@om-gta02:~# s3c24xx-gpio b7=0
root@om-gta02:~# echo "AT@POFF" >/dev/ttySAC0

• Launch the FLUID binary:

root@om-gta02:~# cd /usr/sbin
root@om-gta02:/usr/sbin# FLUID_PORT=/dev/ttySAC0 FLUID_FLOWCONTROL=h fluid.exe \
-oO -b 115200 \
-f $HOME/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko9-beta1.m0

It should say something like this (takes a few seconds to load the file):

FLUID Revision 2.27, ...
Bootloader: (reset target)

• Start a second SSH session and start the modem:

root@om-gta02:~# s3c24xx-gpio b7=1

FLUID should now say something like this:

(fluid, version 3) ok
Checksumming (269 * 8kB = 2152kB):  ok
Flash Detect: (0xEC, 0x22A0) Samsung K5A3240CT ok
Program: (34 sectors, 267*8k=2136k) (*******************) ok

Note: If you get this instead: MESSAGE: File cmd.m0 not found, then you didn't do the cd /usr/sbin. Please pay attention ;-)

If FLUID does nothing, curse your bad luck and repeat the reset sequence.

• To verify that everything went well, do this in either of the two sessions:

root@om-gta02:~# cat /dev/ttySAC0 &
root@om-gta02:~# echo -en 'AT\r' >/dev/ttySAC0
root@om-gta02:~# echo -en 'AT+CGMR\r' >/dev/ttySAC0
+CGMR: "HW: GTA, GSM: gsm_ac_gp_fd_pu_em_cph_ds_vc_cal_amd8_ts0-Moko9-beta1"
root@om-gta02:~# kill %1

In some case you may recive this:

(fluid, version 3) ok
Checksumming (269 * 8kB = 2152kB):  ok
Flash Detect: (0xEC, 0x22A0) Samsung K5A3240CT ok
Program: (0 sectors, 0*8k=0k) () ok

if so reflash some older firmware that can be found here (http://people.openmoko.org/joerg/calypso_moko_FW/)

Search

Tools