View source for Flashing the GSM Firmware

From Openmoko

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Administrators.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page:

Template used on this page:

Return to Flashing the GSM Firmware.

Personal tools


This is a step-by-step description of how the firmware is upgraded on a GTA02 with FLUID running on the device. Note that this process tolerates almost no variations. Stray from the instructions at your own peril. Instructions based on a posting by Werner, thanks.

Phase 1: Preparations

  • Download and install a distribution to your device that gives you SSH access. We recommend the fso-console image:
mickey@amethyst$ cd /tmp
mickey@amethyst$ wget
mickey@amethyst$ dfu-util -a rootfs -R -D ./openmoko-fso-console-image-glibc-ipk--20081028-om-gta02.rootfs.jffs2.summary
mickey@amethyst$ wget
mickey@amethyst$ dfu-util -a kernel -R -D ./uImage-2.6.24+r10+gitr75999+54524f4531c8b262431b794fea610d81bb351c86-r10-om-gta02.bin
root@om-gta02:~# opkg install
root@om-gta02:~# opkg install
root@om-gta02:~# cd $HOME
root@om-gta02:~# wget

Phase 2: The Lobotomy

  • Make sure nothing is accessing the GSM modem. If you're using the fso-console image from the link above, this will happen automagically on boot. On other systems, kill processes as you see fit.
  • Powercycle the modem:
root@om-gta02:~# echo 0 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on
root@om-gta02:~# echo 1 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on
root@om-gta02:~# s3c24xx-gpio b7=0
root@om-gta02:~# echo "AT@POFF" >/dev/ttySAC0
  • Launch the FLUID binary:
root@om-gta02:~# cd /usr/sbin
root@om-gta02:/usr/sbin# FLUID_PORT=/dev/ttySAC0 FLUID_FLOWCONTROL=h fluid.exe \
-oO -b 115200 \
-f $HOME/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko9-beta1.m0

It should say something like this (takes a few seconds to load the file):

FLUID Revision 2.27, ...
Bootloader: (reset target)
  • Start a second SSH session and start the modem:
root@om-gta02:~# s3c24xx-gpio b7=1

FLUID should now say something like this:

(fluid, version 3) ok
Checksumming (269 * 8kB = 2152kB):  ok
Flash Detect: (0xEC, 0x22A0) Samsung K5A3240CT ok
Program: (34 sectors, 267*8k=2136k) (*******************) ok

Note: If you get this instead: MESSAGE: File cmd.m0 not found, then you didn't do the cd /usr/sbin. Please pay attention ;-)

If FLUID does nothing, curse your bad luck and repeat the reset sequence.

  • To verify that everything went well, do this in either of the two sessions:
root@om-gta02:~# cat /dev/ttySAC0 &
root@om-gta02:~# echo -en 'AT\r' >/dev/ttySAC0
root@om-gta02:~# echo -en 'AT+CGMR\r' >/dev/ttySAC0
+CGMR: "HW: GTA, GSM: gsm_ac_gp_fd_pu_em_cph_ds_vc_cal_amd8_ts0-Moko9-beta1"
root@om-gta02:~# kill %1