Finding hardware revision
From Openmoko
(tried (but failed) to add chapters, and /proc/cpuinfo) |
|||
Line 1: | Line 1: | ||
NOTE! The string found in /proc/cpuinfo IS NOT A RELIABLE INDICATOR OF WHICH HARDWARE YOU HAVE! [citation needed -- for shipping A5 and A6 PCBs it should be perfectly reliable] | NOTE! The string found in /proc/cpuinfo IS NOT A RELIABLE INDICATOR OF WHICH HARDWARE YOU HAVE! [citation needed -- for shipping A5 and A6 PCBs it should be perfectly reliable] | ||
− | + | For all methods, you will need to login via [[USB Networking]] or otherwise SSH into your FreeRunner, and find the hardware revision using one of the following methods: | |
+ | |||
+ | = /proc/cpuinfo = | ||
+ | |||
+ | <pre> | ||
+ | root@om-gta02:~# cat /proc/cpuinfo | ||
+ | . | ||
+ | . | ||
+ | . | ||
+ | Hardware : GTA02 | ||
+ | Revision : 0350 | ||
+ | </pre> | ||
+ | |||
+ | The line that says "Revision" is the one you want. The "03" means it's a FreeRunner, and the "05" indicates the hardware revision, in this case revision 05. | ||
+ | |||
+ | '''Caution: may be wrong for hardware versions earlier than 05, or for u-boot earlier than about June, 2008.''' | ||
+ | |||
+ | = Using libgsmd-tool = | ||
<pre> | <pre> | ||
Line 13: | Line 30: | ||
gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko8" | gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko8" | ||
</pre> | </pre> | ||
+ | |||
+ | = FSO = | ||
If your are running [[OpenmokoFramework|fso]], you can use [[OpenmokoFramework/mickeyterm|mickeyterm]] and the '''at+cgmr''' command. Or you can use [[OpenmokoFramework/mdbus|mdbus]], like this: | If your are running [[OpenmokoFramework|fso]], you can use [[OpenmokoFramework/mickeyterm|mickeyterm]] and the '''at+cgmr''' command. Or you can use [[OpenmokoFramework/mdbus|mdbus]], like this: |
Revision as of 07:41, 10 September 2008
NOTE! The string found in /proc/cpuinfo IS NOT A RELIABLE INDICATOR OF WHICH HARDWARE YOU HAVE! [citation needed -- for shipping A5 and A6 PCBs it should be perfectly reliable]
For all methods, you will need to login via USB Networking or otherwise SSH into your FreeRunner, and find the hardware revision using one of the following methods:
/proc/cpuinfo
root@om-gta02:~# cat /proc/cpuinfo . . . Hardware : GTA02 Revision : 0350
The line that says "Revision" is the one you want. The "03" means it's a FreeRunner, and the "05" indicates the hardware revision, in this case revision 05.
Caution: may be wrong for hardware versions earlier than 05, or for u-boot earlier than about June, 2008.
Using libgsmd-tool
root@om-gta02:~# libgsmd-tool -m shell libgsm-tool - (C) 2006-2007 by Harald Welte and Openmoko, Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY rv # # Get revision revision: "HW: GTA02BV5, GSM: gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko8"
FSO
If your are running fso, you can use mickeyterm and the at+cgmr command. Or you can use mdbus, like this:
root@om-gta01:~# mdbus -s org.freesmartphone.ogsmd /org/freesmartphone/GSM/Device org.freesmartphone.GSM.Device.GetInfo
The result will be something like this:
/org/freesmartphone/GSM/Device: GetInfo -> dbus.Dictionary({dbus.String(u'imei'): dbus.String(u'nnnnnnnnnnnnnnn', variant_level=1), dbus.String(u'model'): dbus.String(u'Neo1973 GTA01 Embedded GSM Modem', variant_level=1), dbus.String(u'revision'): dbus.String(u'HW: GTA01Bv4, GSM: gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko1', variant_level=1), dbus.String(u'manufacturer'): dbus.String(u'FIC/OpenMoko', variant_level=1)}, signature=dbus.Signature('sv'))
Where 'nnnnnnnnnnnnnnn' is you IMEI.