Finding hardware revision

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m
(/proc/cpuinfo: corr)
 
(12 intermediate revisions by 6 users not shown)
Line 1: Line 1:
NOTE! The string found in /proc/cpuinfo IS NOT A RELIABLE INDICATOR OF WHICH HARDWARE YOU HAVE!
+
__TOC__
  
You will need to login via [[USB Networking]] or otherwise SSH into your FreeRunner, and find the hardware revision as follows:
+
For all methods, you will need to login via [[USB Networking]] or otherwise SSH into your FreeRunner, and find the hardware revision using one of the following methods:
 +
 
 +
= /proc/cpuinfo =
 +
 
 +
<pre>
 +
root@om-gta02:~# cat /proc/cpuinfo
 +
...
 +
Hardware : GTA02
 +
Revision : xxxx0350
 +
...
 +
</pre>
 +
 
 +
The line that says "Revision" is the one you want. The "03" means it's a FreeRunner, and the "50" (not "05") indicates the hardware revision, in this case revision 05. "xxxx" is "2442".
 +
 
 +
For A6 and A7 checking
 +
 
 +
Try cat /sys/devices/platform/neo1973-version.0/pcb, on my A6 it gives
 +
0x001, on A7 it'd be 0x101.
 +
 
 +
 
 +
'''Caution: may be wrong for hardware versions earlier than 05, or for u-boot earlier than about June, 2008.'''
 +
 
 +
= Using libgsmd-tool =
  
 
<pre>
 
<pre>
 
root@om-gta02:~# libgsmd-tool -m shell
 
root@om-gta02:~# libgsmd-tool -m shell
libgsm-tool - (C) 2006-2007 by Harald Welte and OpenMoko, Inc.
+
libgsm-tool - (C) 2006-2007 by Harald Welte and Openmoko, Inc.
 
This program is Free Software and has ABSOLUTELY NO WARRANTY
 
This program is Free Software and has ABSOLUTELY NO WARRANTY
  
Line 14: Line 36:
 
</pre>
 
</pre>
  
[[Category:Hardware]]
+
= FSO =
 +
 
 +
If your are running [[OpenmokoFramework|fso]], you can use [[OpenmokoFramework/mickeyterm|mickeyterm]] and the '''at+cgmr''' command. Or you can use [[OpenmokoFramework/mdbus|mdbus]], like this:
 +
<pre>
 +
root@om-gta01:~# mdbus -s org.freesmartphone.ogsmd /org/freesmartphone/GSM/Device org.freesmartphone.GSM.Device.GetInfo
 +
</pre>
 +
The result will be something like this:
 +
<pre>
 +
/org/freesmartphone/GSM/Device: GetInfo ->  dbus.Dictionary({dbus.String(u'imei'): dbus.String(u'nnnnnnnnnnnnnnn',
 +
variant_level=1), dbus.String(u'model'):
 +
dbus.String(u'Neo1973 GTA01 Embedded GSM Modem', variant_level=1), dbus.String(u'revision'):
 +
dbus.String(u'HW: GTA01Bv4, GSM: gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko1', variant_level=1),
 +
dbus.String(u'manufacturer'): dbus.String(u'FIC/OpenMoko', variant_level=1)}, signature=dbus.Signature('sv'))
 +
</pre>
 +
Where 'nnnnnnnnnnnnnnn' is you [[IMEI]].
 +
 
 +
==See also==
 +
*[[GTA02 revisions]]
 +
 
 +
[[Category:Neo FreeRunner Hardware]]

Latest revision as of 08:36, 19 September 2009

Contents


For all methods, you will need to login via USB Networking or otherwise SSH into your FreeRunner, and find the hardware revision using one of the following methods:

[edit] /proc/cpuinfo

root@om-gta02:~# cat /proc/cpuinfo
...
Hardware	: GTA02
Revision	: xxxx0350
...

The line that says "Revision" is the one you want. The "03" means it's a FreeRunner, and the "50" (not "05") indicates the hardware revision, in this case revision 05. "xxxx" is "2442".

For A6 and A7 checking

Try cat /sys/devices/platform/neo1973-version.0/pcb, on my A6 it gives 0x001, on A7 it'd be 0x101.


Caution: may be wrong for hardware versions earlier than 05, or for u-boot earlier than about June, 2008.

[edit] Using libgsmd-tool

root@om-gta02:~# libgsmd-tool -m shell
libgsm-tool - (C) 2006-2007 by Harald Welte and Openmoko, Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

rv
# # Get revision
revision: "HW: GTA02BV5, GSM:
gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko8"

[edit] FSO

If your are running fso, you can use mickeyterm and the at+cgmr command. Or you can use mdbus, like this:

root@om-gta01:~# mdbus -s org.freesmartphone.ogsmd /org/freesmartphone/GSM/Device org.freesmartphone.GSM.Device.GetInfo

The result will be something like this:

/org/freesmartphone/GSM/Device: GetInfo ->  dbus.Dictionary({dbus.String(u'imei'): dbus.String(u'nnnnnnnnnnnnnnn',
 variant_level=1), dbus.String(u'model'): 
dbus.String(u'Neo1973 GTA01 Embedded GSM Modem', variant_level=1), dbus.String(u'revision'):
dbus.String(u'HW: GTA01Bv4, GSM: gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko1', variant_level=1), 
dbus.String(u'manufacturer'): dbus.String(u'FIC/OpenMoko', variant_level=1)}, signature=dbus.Signature('sv'))

Where 'nnnnnnnnnnnnnnn' is you IMEI.

[edit] See also

Personal tools

NOTE! The string found in /proc/cpuinfo IS NOT A RELIABLE INDICATOR OF WHICH HARDWARE YOU HAVE!

You will need to login via USB Networking or otherwise SSH into your FreeRunner, and find the hardware revision as follows:

root@om-gta02:~# libgsmd-tool -m shell
libgsm-tool - (C) 2006-2007 by Harald Welte and OpenMoko, Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

rv
# # Get revision
revision: "HW: GTA02BV5, GSM:
gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko8"