File talk:SimpleComponentDiagram.jpg

From Openmoko

Revision as of 13:13, 3 July 2008 by HaraldWelte (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

there are some problems with this image:

  1. the NOR flash attaches to the data bus (better called: system bus), not to the NAND controller
  2. the internal SD-RAM attaches to the sdram controller. maybe that should be visualized somehow
  3. the internal NAND flash attaches to the nand controller.
  4. the 1wire protocol between battery and s3c2442b is not shown
  5. the AGPS and GSM attach to different UART's, not the same one
  6. the JTAG and serial console UART are not shown (Debug board connection)
  7. the bluetooth module connects with the wolfson codec (PCM interface)
  8. almost all peripherals (agps, wlan, bluetooth, lcd, smedia, ...) attach to the GPIO unit, so i'm not sure if we should show it for some (amp, gsm) but not for others
Personal tools

there are some problems with this image:

  1. the NOR flash attaches to the data bus (better called: system bus), not to the NAND controller
  2. the internal SD-RAM attaches to the sdram controller. maybe that should be visualized somehow
  3. the internal NAND flash attaches to the nand controller.
  4. the 1wire protocol between battery and s3c2442b is not shown
  5. the AGPS and GSM attach to different UART's, not the same one
  6. the JTAG and serial console UART are not shown (Debug board connection)
  7. the bluetooth module connects with the wolfson codec (PCM interface)
  8. almost all peripherals (agps, wlan, bluetooth, lcd, smedia, ...) attach to the GPIO unit, so i'm not sure if we should show it for some (amp, gsm) but not for others