Dfu-util/zh cn

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(目的)
(目的)
Line 12: Line 12:
 
** u-boot 环境
 
** u-boot 环境
 
** Last, but not least: The [[u-boot]] bootloader itself.
 
** Last, but not least: The [[u-boot]] bootloader itself.
* transfer anything into Neo1973 RAM
+
* Neo1973 RAM 传输任何东西
 
** this can be used for fast development cycles of low-level code such as kernels without flashing them
 
** this can be used for fast development cycles of low-level code such as kernels without flashing them
 
* read out the current NAND partitions
 
* read out the current NAND partitions

Revision as of 11:08, 2 November 2007

Contents

目的

dfu-util 是一个实现主机端USB DFU(通用串行总线 设备固件升级)协议的程序。

在 OpenMoko 项目中,我们使用这个程序来与我们的特别增强型boot loader u-boot 通信,这个boot loader实现了DFU的设备侧功能。

通过使用 dfu-util 和你的 Neo1973,你能做到:

  • transfer and flash partitions to NAND Flash, such as
    • The Linux kernel
    • 根文件系统分区
    • The splash screen partition
    • u-boot 环境
    • Last, but not least: The u-boot bootloader itself.
  • 向 Neo1973 的 RAM 传输任何东西
    • this can be used for fast development cycles of low-level code such as kernels without flashing them
  • read out the current NAND partitions
    • this is an easy and efficient way of doing full backups of your phone

源代码

dfu-util 的源代码可以从 http://svn.openmoko.org/trunk/src/host/dfu-util/ 下载。

Binary packages will be made available as part of the regular OpenMoko builds

参考文档

Command-line options

--help

dfu-util - (C) 2007 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

Usage: dfu-util [options] ...
  -h --help                     Print this help message
  -V --version                  Print the version number
  -l --list                     List the currently attached DFU capable USB devices
  -d --device vendor:product    Specify Vendor/Product ID of DFU device
  -c --cfg config_nr            Specify the Configuration of DFU device
  -i --intf intf_nr             Specify the DFU Interface number
  -a --alt alt_nr               Specify the Altseting of the DFU Interface
  -t --transfer-size            Specify the number of bytes per USB Transfer
  -U --upload file              Read firmware from device into <file>
  -D --download file            Write firmware from <file> into device
  -R --reset                    Issue USB Reset signalling once we're finished

--list

Using the --list option, you can list the available DFU capable devices, their configuration, interface and altsettings. Below is an example for a current Neo1973 phone in u-boot Runtime Mode

# ./dfu-util --list
dfu-util - (C) 2007 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

Found DFU Runtime: [0x1457:0x5119] devnum=0, cfg=0, intf=2, alt=0, name="USB Device Firmware Upgrade"

Below is an example for a current Neo1973 phone in u-boot DFU Mode

# ./dfu-util --list
dfu-util - (C) 2007 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=0, name="RAM 0x32000000"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=1, name="u-boot"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=2, name="u-boot_env"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=3, name="kernel"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=4, name="splash"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=5, name="rootfs"

This shows you six interfaces, all in configuration 0 and interface 0, with altsetting 0...4. The name is currently not yet defined, but will be added to one of the upcoming u-boot releases. The mapping on the Neo1973 is as follows:

  • 0: RAM
  • 1: 'u-boot' partition
  • 2: 'u-boot_env' partition
  • 3: 'kernel' partition
  • 4: 'splash' partition
  • 5: 'rootfs' partition

--device

You can specify the USB Vendor and Product ID of the device you want to program:

dfu-util --device 0x1457:0x5119

If you only have one standards-compliant DFU device attached to your PC, this is optional. However, as soon as you have multiple DFU devices, dfu-util will detect this and abort, asking you to specify which device it shall use.

--transfer-size

Specifies the size of each individual USB transfer. If you don't use it, the maximum possible size for your combination of host operating system and USB device is chosen (for optimal performance).

--download

download the given file into the device.

--upload

upload from the DFU device into the given file[name].

NOTE: Upload support is currently broken


Phrasebook

There's no full-fledged manual yet. Instead, some examples:

Flashing the kernel

dfu-util -a 3 -R -D /path/to/uImage

Flashing the bootloader

dfu-util -a 1 -R -D /path/to/u-boot.bin

Copying a kernel into RAM

dfu-util -a 0 -R -D /path/to/uImage

Once this has finished, the kernel will be available at the default load address of 0x32000000 in Neo1973 RAM.

NOTE: You cannot transfer more than 2MB of data into RAM using this method


Personal tools

目的

dfu-util 是一个实现主机端USB DFU(通用串行总线 设备固件升级)协议的程序。

在 OpenMoko 项目中,我们使用这个程序来与我们的特别增强型boot loader u-boot 通信,这个boot loader实现了DFU的设备侧功能。

通过使用 dfu-util 和你的 Neo1973,你能做到:

  • transfer and flash partitions to NAND Flash, such as
    • The Linux kernel
    • 根文件系统分区
    • The splash screen partition
    • u-boot 环境
    • Last, but not least: The u-boot bootloader itself.
  • transfer anything into Neo1973 RAM
    • this can be used for fast development cycles of low-level code such as kernels without flashing them
  • read out the current NAND partitions
    • this is an easy and efficient way of doing full backups of your phone

源代码

dfu-util 的源代码可以从 http://svn.openmoko.org/trunk/src/host/dfu-util/ 下载。

Binary packages will be made available as part of the regular OpenMoko builds

参考文档

Command-line options

--help

dfu-util - (C) 2007 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

Usage: dfu-util [options] ...
  -h --help                     Print this help message
  -V --version                  Print the version number
  -l --list                     List the currently attached DFU capable USB devices
  -d --device vendor:product    Specify Vendor/Product ID of DFU device
  -c --cfg config_nr            Specify the Configuration of DFU device
  -i --intf intf_nr             Specify the DFU Interface number
  -a --alt alt_nr               Specify the Altseting of the DFU Interface
  -t --transfer-size            Specify the number of bytes per USB Transfer
  -U --upload file              Read firmware from device into <file>
  -D --download file            Write firmware from <file> into device
  -R --reset                    Issue USB Reset signalling once we're finished

--list

Using the --list option, you can list the available DFU capable devices, their configuration, interface and altsettings. Below is an example for a current Neo1973 phone in u-boot Runtime Mode

# ./dfu-util --list
dfu-util - (C) 2007 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

Found DFU Runtime: [0x1457:0x5119] devnum=0, cfg=0, intf=2, alt=0, name="USB Device Firmware Upgrade"

Below is an example for a current Neo1973 phone in u-boot DFU Mode

# ./dfu-util --list
dfu-util - (C) 2007 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=0, name="RAM 0x32000000"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=1, name="u-boot"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=2, name="u-boot_env"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=3, name="kernel"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=4, name="splash"
Found DFU: [0x1457:0x5119] devnum=16, cfg=0, intf=0, alt=5, name="rootfs"

This shows you six interfaces, all in configuration 0 and interface 0, with altsetting 0...4. The name is currently not yet defined, but will be added to one of the upcoming u-boot releases. The mapping on the Neo1973 is as follows:

  • 0: RAM
  • 1: 'u-boot' partition
  • 2: 'u-boot_env' partition
  • 3: 'kernel' partition
  • 4: 'splash' partition
  • 5: 'rootfs' partition

--device

You can specify the USB Vendor and Product ID of the device you want to program:

dfu-util --device 0x1457:0x5119

If you only have one standards-compliant DFU device attached to your PC, this is optional. However, as soon as you have multiple DFU devices, dfu-util will detect this and abort, asking you to specify which device it shall use.

--transfer-size

Specifies the size of each individual USB transfer. If you don't use it, the maximum possible size for your combination of host operating system and USB device is chosen (for optimal performance).

--download

download the given file into the device.

--upload

upload from the DFU device into the given file[name].

NOTE: Upload support is currently broken


Phrasebook

There's no full-fledged manual yet. Instead, some examples:

Flashing the kernel

dfu-util -a 3 -R -D /path/to/uImage

Flashing the bootloader

dfu-util -a 1 -R -D /path/to/u-boot.bin

Copying a kernel into RAM

dfu-util -a 0 -R -D /path/to/uImage

Once this has finished, the kernel will be available at the default load address of 0x32000000 in Neo1973 RAM.

NOTE: You cannot transfer more than 2MB of data into RAM using this method