dfu-util is a program that implements the Host (PC) side of the USB DFU (Universal Serial Bus Device Firmware Upgrade) protocol.
In the Openmoko project, we use this program to communicate with our specially enhanced bootloader, which implements the DFU device side.
Using dfu-util and your smartphone, you can
- transfer and flash partitions in internal NAND Flash.
- transfer anything into RAM
- this can be used for fast development cycles of low-level code such as kernels without flashing them
- read out the current internal NAND partitions
- this is an easy and efficient way of doing full backups of your phone
On Debian and Ubuntu, you'll need libusb-dev: sudo apt-get install libusb-dev autogen pkg-config autotools-dev autoconf automake
On Fedora you'll need libusb-devel and libusb-static: yum install libusb-devel libusb-static
On Gentoo you can: emerge -va openmoko-dfu-util
You can check out and build the latest version of dfu-util using the following git command:
git clone git://git.openezx.org/dfu-util.git
The resulting binary is dfu-util/src/dfu-util.
Binary packages will be made available as part of the regular Openmoko builds. Currently, there is a dfu-util for Linux/i386.
You need to make the downloaded file (dfu-util) executable with:
chmod +x dfu-util
you can then run it with
see below for full instructions.
dfu-util 0.0+r4880-1 is packaged for Debian >= lenny, so can be installed with: apt-get install dfu-util
dfu-util 0.0+r4067-3.1 is packaged for Ubuntu >= intrepid (8.10), so can be installed with: apt-get install dfu-util
dfu-util is packaged for Slackware (12.1), so can be installed with: pkgtool
A newer SlackBuild is also available on slackbuilds.org
dfu-util is packaged for Arch Linux, so can be installed with makepkg
The links below install rpm packaged dfu-util in (open)SuSE :
DFU-Util is in the main tree under the name openmoko-dfu-util.
Compiling dfu-util on Mac:
- Openmoko Flasher has a precompiled binary in the App bundle