Debug Board v1

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Questions)
(Usage instructions)
Line 21: Line 21:
 
== Usage instructions ==
 
== Usage instructions ==
  
FIXME
+
=== Connectors ===
 +
 
 +
==== Debug cable to phone ====
 +
Use the flat ribbon-cable to connect to the phone. 
 +
# The wide end is for the Debug board, the narrow end for the phone
 +
# For both sides:
 +
## Lift the brown lever of the connector on the PCB
 +
## Place the copper contacts on the bottom (brown surface facing to the top.
 +
## Insert the ribbon cable as far as possible into the connector (it won't go in all the way, that's normal)
 +
## Close the brown lever to lock the ribbon cable
  
 
== Questions ==
 
== Questions ==

Revision as of 18:55, 3 January 2007

Contents

Hardware Components

  • RTL8xxx Ethernet MAC
    • This adds network connectivity during development
  • Two 7-segment LED displays
  • Two DB-9 headers
    • Serial Console (level-shifted to true RS232 levels)
    •  ?
  • One DB-25 header
    •  ?
  • One 2x10pin 2.54mm header
    • JTAG Port

Schematics

http://people.openmoko.org/sean_chiang/Debugboard.pdf

http://people.openmoko.org/sean_chiang/top.pdf

http://people.openmoko.org/sean_chiang/bottom.pdf

Usage instructions

Connectors

Debug cable to phone

Use the flat ribbon-cable to connect to the phone.

  1. The wide end is for the Debug board, the narrow end for the phone
  2. For both sides:
    1. Lift the brown lever of the connector on the PCB
    2. Place the copper contacts on the bottom (brown surface facing to the top.
    3. Insert the ribbon cable as far as possible into the connector (it won't go in all the way, that's normal)
    4. Close the brown lever to lock the ribbon cable

Questions

  • Can it also be connected to GTA01v4 ?

Bugs/Problems

see http://bugzilla.openmoko.org/cgi-bin/bugzilla/buglist.cgi?product=Debug+Board

Personal tools

Hardware Components

  • RTL8xxx Ethernet MAC
    • This adds network connectivity during development
  • Two 7-segment LED displays
  • Two DB-9 headers
    • Serial Console (level-shifted to true RS232 levels)
    •  ?
  • One DB-25 header
    •  ?
  • One 2x10pin 2.54mm header
    • JTAG Port

Schematics

http://people.openmoko.org/sean_chiang/Debugboard.pdf

http://people.openmoko.org/sean_chiang/top.pdf

http://people.openmoko.org/sean_chiang/bottom.pdf

Usage instructions

FIXME

Questions

  • Can it also be connected to GTA01v4 ?

Bugs/Problems

see http://bugzilla.openmoko.org/cgi-bin/bugzilla/buglist.cgi?product=Debug+Board