Bt-net-script

From Openmoko

(Difference between revisions)
Jump to: navigation, search
Line 31: Line 31:
 
</pre>
 
</pre>
  
[[Category:Openmoko]]
+
[[Category:Application Developer]]

Revision as of 09:40, 13 July 2008

Just copy the block below into a script called bt-net, and run bt-net to initiate IP over bluetooth.

Don't forget to change XX:XX:XX:XX:XX:XX out for the bluetooth interface on your PC, as found by executing "hcitool scan" on your neo.

#!/bin/sh
echo '1' > /sys/bus/platform/devices/gta01-pm-bt.0/power_on 

#!!! change XX... to your correct PC bluetooth interface id (use "hcitool scan" to find it) !!!
export PC_BT_ID=XX:XX:XX:XX:XX:XX
sleep 1

#Winders stuff
#pand -c $1 -r PANU -d NAP -e bnep0 -A -E -S
#pand -n -c $1 -r PANU -d NAP -e bnep0 -A -E -S

pand -c $PC_BT_ID --service NAP --autozap

#wait for main pc to set up route
while ! pand -l | grep bnep0
do
  echo waiting to connect
  pand -c $PC_BT_ID --service NAP --autozap
  sleep 1
done


ip a add 10.0.0.2/24 dev bnep0
ip r del default
ip r add default via 10.0.0.1
Personal tools

Just copy the block below into a script called bt-net, and run bt-net to initiate IP over bluetooth.

Don't forget to change XX:XX:XX:XX:XX:XX out for the bluetooth interface on your PC, as found by executing "hcitool scan" on your neo.

#!/bin/sh
echo '1' > /sys/bus/platform/devices/gta01-pm-bt.0/power_on 

#!!! change XX... to your correct PC bluetooth interface id (use "hcitool scan" to find it) !!!
export PC_BT_ID=XX:XX:XX:XX:XX:XX
sleep 1

#Winders stuff
#pand -c $1 -r PANU -d NAP -e bnep0 -A -E -S
#pand -n -c $1 -r PANU -d NAP -e bnep0 -A -E -S

pand -c $PC_BT_ID --service NAP --autozap

#wait for main pc to set up route
while ! pand -l | grep bnep0
do
  echo waiting to connect
  pand -c $PC_BT_ID --service NAP --autozap
  sleep 1
done


ip a add 10.0.0.2/24 dev bnep0
ip r del default
ip r add default via 10.0.0.1