Known to work headsets
Please see A2DP#Devices_that_work for complete list
and comparison table.
Get the bluetooth alsa state and DAC setup script
# Configuration file for the audio service # This section contains options which are not specific to any # particular interface [General] # If we want to disable support for specific services # Defaults to supporting all implemented services #Disable=Control,Source # SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA) # Defaults to HCI SCORouting=PCM # Headset interface specific options (i.e. options which affect how the audio # service interacts with remote headset devices) [Headset] # Set to true to only support HSP # Defaults to false DisableHFP=false # Just an example of potential config options for the other interfaces #[A2DP] #SourceCount=2
The important part is the SCORouting.
Connect and setup the headset
/etc/init.d/bluetooth stop /etc/init.d/bluetooth start passkey-agent --default 0000 & dbus-send --system --type=method_call --print-reply --dest=org.bluez \ /org/bluez/hci0 org.bluez.Adapter.CreateBonding string:$DEVICE dbus-send --system --type=method_call --print-reply --dest=org.bluez \ /org/bluez/audio org.bluez.audio.Manager.CreateHeadset string:$DEVICE dbus-send --system --type=method_call --print-reply --dest=org.bluez \ "/org/bluez/audio/device0" org.bluez.audio.Headset.Connect dbus-send --system --type=method_call --print-reply --dest=org.bluez \ "/org/bluez/audio/device0" org.bluez.audio.Headset.Play
During the call
After having answered / placed the call, switch the audio to the bluetooth headset. You need a small workaround to get audio in, which is included below.
alsactl -f GSMBLUETOOTH.txt restore ./bluetooth_pcm &
the workaround is to switch Capture Left Mixer first to Analogue Mix Right and then back to Analogue Mix Right. This can be done with alsamixer:
(lookup Capture Left Mixer in the "gui" and toggle the value).