Angstrom on Neo1973

From Openmoko

(Difference between revisions)
Jump to: navigation, search
m
m (linkfix)
Line 8: Line 8:
 
* Download kernel: http://www.angstrom-distribution.org/unstable/images/fic-gta01/20070709/uImage-2.6.21.3-moko10-r3-fic-gta01.bin (link dead)
 
* Download kernel: http://www.angstrom-distribution.org/unstable/images/fic-gta01/20070709/uImage-2.6.21.3-moko10-r3-fic-gta01.bin (link dead)
 
* Download root-image: http://www.angstrom-distribution.org/unstable/images/fic-gta01/20070709/Angstrom-console-image-glibc-test-20070709-fic-gta01.rootfs.jffs2 (link dead)
 
* Download root-image: http://www.angstrom-distribution.org/unstable/images/fic-gta01/20070709/Angstrom-console-image-glibc-test-20070709-fic-gta01.rootfs.jffs2 (link dead)
* Flash these via dfu-util as explained on [[Flashing openmoko]].
+
* Flash these via dfu-util as explained on [[Flashing the Neo 1973]].
  
 
== Connecting to the internet ==
 
== Connecting to the internet ==

Revision as of 14:49, 22 October 2008

This page describes the process on getting the Ångström distribution running on Neo1973-GTA01. These instructions will evolve as better support is added - for now this is just a quick list on the required steps.

NOTE: These instructions will not result in a proper installation supporting the device. There will be no power management, no GSM, no GPS, etc. This is just for hacking and fun.



Contents

Flashing

Connecting to the internet

  • Boot up the phone - the kernel should boot, and after that graphical boot will continue. Wait until graphical boot is complete.
  • Connect the phone to your computer with the USB cable
  • Set up a connection to the internet for your phone, details in USB Networking
  • ssh root@192.168.0.202
  • Add some working nameservers to /etc/resolv.conf

Adding packages

  • Run ipkg update - New package lists should be downloaded
  • Run ipkg install xserver-kdrive-fbdev - This should install the X server
  • Add packages to taste, for example ipkg install task-base-extended angstrom-x11-base-depends angstrom-gpe-task-base angstrom-gpe-task-settings libesd0
  • Reboot the phone

Done

After rebooting X should start at the end of the graphical boot and the first application to start up should be stylus calibration and then creating the first user account.

Personal tools

This page describes the process on getting the Ångström distribution running on Neo1973-GTA01. These instructions will evolve as better support is added - for now this is just a quick list on the required steps.

NOTE: These instructions will not result in a proper installation supporting the device. There will be no power management, no GSM, no GPS, etc. This is just for hacking and fun.



Flashing

Connecting to the internet

  • Boot up the phone - the kernel should boot, and after that graphical boot will continue. Wait until graphical boot is complete.
  • Connect the phone to your computer with the USB cable
  • Set up a connection to the internet for your phone, details in USB Networking
  • ssh root@192.168.0.202
  • Add some working nameservers to /etc/resolv.conf

Adding packages

  • Run ipkg update - New package lists should be downloaded
  • Run ipkg install xserver-kdrive-fbdev - This should install the X server
  • Add packages to taste, for example ipkg install task-base-extended angstrom-x11-base-depends angstrom-gpe-task-base angstrom-gpe-task-settings libesd0
  • Reboot the phone

Done

After rebooting X should start at the end of the graphical boot and the first application to start up should be stylus calibration and then creating the first user account.