Analog wired Headset
From Openmoko
(Difference between revisions)
MinhHaDuong (Talk | contribs) (Link to Dylan scripts for configuration at insert/remove) |
(Add nokia headset rewiring information) |
||
| Line 2: | Line 2: | ||
The headsets used by Motorola smartphones (A780,A1200, ...) and the V-360 have a compatible configuration. | The headsets used by Motorola smartphones (A780,A1200, ...) and the V-360 have a compatible configuration. | ||
| + | |||
| + | The headsets used by some Nokia phones (N95, ...) have the same jack but they are incompatible. For technical information about rewiring them visit [[Analog wired Headset Nokia | ||
== Neo FreeRunner == | == Neo FreeRunner == | ||
Revision as of 04:28, 7 September 2008
There's a four-ring 2.5mm stereo jack which provides connectivity to old-fashioned wired headsets.
The headsets used by Motorola smartphones (A780,A1200, ...) and the V-360 have a compatible configuration.
The headsets used by some Nokia phones (N95, ...) have the same jack but they are incompatible. For technical information about rewiring them visit [[Analog wired Headset Nokia
Neo FreeRunner
ring
1(base): GND
2: left out
3: right out
4(tip): mic + HOLD-button(press:short to GND)
Neo 1973
Pinout: [1]
base = ground
speaker left (internal impedance 33R) to ground. (+jackinsert detection)
speaker right (internal impedance 33R) to ground.
tip = mic electret condenser type, to ground.
bias (power for mic) 2K2 from +3.3v(wolfson codec)
(+HoldButton shortcircuit to ground)
Software support
Dylan proposed a proof of concept scripts to fix something about the headset insertion/removal being incorrectly acted upon.
