Analog wired Headset

From Openmoko

(Difference between revisions)
Jump to: navigation, search
(Neo 1973: fixed link to mailing list)
(Link to Dylan scripts for configuration at insert/remove)
Line 22: Line 22:
 
       (+HoldButton shortcircuit to ground)
 
       (+HoldButton shortcircuit to ground)
 
</nowiki></pre>
 
</nowiki></pre>
 +
 +
== Software support ==
 +
 +
Dylan proposed a [http://lists.openmoko.org/pipermail/community/2008-September/029599.html proof of concept scripts] to fix something about the headset insertion/removal being incorrectly acted upon.
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]
 
[[Category:Neo1973 Hardware]]
 
[[Category:Neo1973 Hardware]]
 
[[Category:Neo FreeRunner Hardware]]
 
[[Category:Neo FreeRunner Hardware]]
[[Category:Used chip]]
+
[[Category:Audio]]

Revision as of 10:02, 6 September 2008

There's a four-ring 2.5mm stereo jack which provides connectivity to old-fashioned wired headsets.

The headsets used by Motorola smartphones (A780,A1200, ...) and the V-360 have a compatible configuration.

Neo FreeRunner

ring
1(base): GND
2: left out
3: right out
4(tip): mic + HOLD-button(press:short to GND)

Neo 1973

Pinout: [1]

base = ground 
speaker left  (internal impedance 33R) to ground. (+jackinsert detection)
speaker right (internal impedance 33R) to ground.
tip = mic electret condenser type, to ground. 
      bias (power for mic) 2K2 from +3.3v(wolfson codec) 
      (+HoldButton shortcircuit to ground)

Software support

Dylan proposed a proof of concept scripts to fix something about the headset insertion/removal being incorrectly acted upon.

Personal tools

There's a four-ring 2.5mm stereo jack which provides connectivity to old-fashioned wired headsets.

The headsets used by Motorola smartphones (A780,A1200, ...) and the V-360 have a compatible configuration.

Neo FreeRunner

ring
1(base): GND
2: left out
3: right out
4(tip): mic + HOLD-button(press:short to GND)

Neo 1973

Pinout: [1]

base = ground 
speaker left  (internal impedance 33R) to ground. (+jackinsert detection)
speaker right (internal impedance 33R) to ground.
tip = mic electret condenser type, to ground. 
      bias (power for mic) 2K2 from +3.3v(wolfson codec) 
      (+HoldButton shortcircuit to ground)