User:Stuart
From Openmoko
The entry in /etc/network/interfaces. I use /30 as my home network is 192.168.0.0/24. I have a local nameserver.
iptables -A FORWARD --in-interface eth7 -j ACCEPT allow-hotplug eth7 iface eth7 inet static address 192.168.0.200 netmask 255.255.255.252 up iptables -A POSTROUTING -t nat -s 192.168.0.200/30 -j MASQUERADE up echo 1 > /proc/sys/net/ipv4/ip_forward down iptables -D POSTROUTING -t nat -s 192.168.0.200/30 -j MASQUERADE iptables -A FORWARD --out-interface eth7 -j ACCEPT
Contents |
Installing Debian
I partitioned by hand because of a problem with fdisk. Changing the type of a partition seems to block with the fdisk from Om 2007.
Disk /dev/mmcblk0: 2032 MB, 2032664576 bytes 4 heads, 16 sectors/track, 62032 cylinders Units = cylinders of 64 * 512 = 32768 bytes Device Boot Start End Blocks Id System /dev/mmcblk0p1 1 57984 1855480 83 Linux /dev/mmcblk0p2 57985 62032 129536 82 Linux swap
Well, install.sh - v3.0, from wiki.debian.org fails.
# HOSTNAME=stuart INST_MIRROR=http://ftp.fr.debian.org/debian QI=true LOCALEPURGE=true ./install.sh --no-partitioning --swap-size 128 --part1-fs ext3 --with-tasks GAMES,NET,WEB,WIFI,COM all [...] P: Configuring package apt P: Configuring helper cdebootstrap-helper-apt E: Internal error: install
http://www.mail-archive.com/smartphones-userland@linuxtogo.org/msg01544.html explains that you have to download install-info_4.13a.dfsg.1-4_armel.deb in the middle of the installation.
HOSTNAME=stuart QI=true INST_MIRROR=http://ftp.fr.debian.org/debian LOCALEPURGE=true /home/root/install.sh --no-partitioning --swap-size 128 --part1-fs ext3 format mount mkdir /mnt/debian/var /mnt/debian/var/cache /mnt/debian/var/cache/bootstrap/ wget http://ftp.debian.org/debian/pool/main/t/texinfo/install-info_4.13a.dfsg.1-4_armel.deb mv install-info_4.13a.dfsg.1-4_armel.deb /mnt/debian/var/cache/bootstrap/ HOSTNAME=stuart QI=true INST_MIRROR=http://ftp.fr.debian.org/debian LOCALEPURGE=true /home/root/install.sh --no-partitioning --swap-size 128 --part1-fs ext3 debian apt fso tasks configuration kernel cleanup unmount
Make a tar of /mnt/debian so that I don't have to go through all this agian.
Configuring Debian
Touchscreen
Now I have debian on my SD card but the touchscreen doesn't work.
http://neil.brown.name/blog/20090212205404 says that it might just be a calibration problem.
apt-get install libts-bin
TSLIB_TSDEVICE=/dev/input/touchscreen0 DISPLAY=:0 /usr/bin/ts_calibrate
Let's read http://www.mail-archive.com/smartphones-userland@linuxtogo.org/msg01205.html which suggests
# apt-get remove xserver-xorg-input-synaptics
Did apt-get install xserver-xglamo
then ran /usr/bin/Xglamo which says
Failed to open TSLib device, tried /dev/ts /dev/touchscreen/0 . Try setting TSLIB_TSDEVICE to valid /dev entry?
Ok, a link ln -s input/touchscreen0 /dev/ts
. /usr/bin/Xglamo works, update /etc/X11/xorg.conf Debian#Xglamo_acceleration and I have a touchscreen that works.
Cleanup
# apt-get remove xserver-xorg-input-wacom